Microstructural and Macroperformance of Recycled Mortar with High-Quality Recycled Aggregate and Powder from High-Performance Concrete Waste
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 3
Abstract
The amount of high-performance concrete (HPC) in construction engineering is growing at a predictable high rate following rapid urban development. However, the utilization of HPC waste as secondary building materials has received little attention until now because previous investigations have focused on the reclamation of ordinary concrete waste. Therefore, this work studied the characterization of mortar containing high-quality recycled aggregate (HRA) and high-quality recycled powder (HRP), both sourced from HPC waste. HRP contains some active components, and the pore structure of paste incorporated with HRP is finer than that of paste containing ordinary recycled powder. Incorporating HRP in paste shortens the setting time and improves the fluidity, and mixing HRA with coarse surface benefits the performance of interfacial transition zone. Incorporating HRA and HRP can both reduce the drying shrinkage, and the maximum shrinkage value of HRA mixed mortar is obviously lower than that of ordinary recycled-aggregate mixed mortar. The mechanical strength first increases and then drops with the HRA incorporation. The incorporated HRP reduces the mechanical strength, but decreasing HRP particle size enhances the mechanical strength of mortar. The water absorption of mortar increases as HRA or HRP is incorporated, but decreasing HRP particle size reduces the water absorption of HRP-incorporated mortar. The mortar with both HRA and HRP has a distinct lower water absorption than the mortar with both ordinary recycled aggregate and powder. High-quality recycled mortar owning good performance can be made by intermixing a suitable amount of HRA and HRP.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors gratefully acknowledge substantial support of ongoing projects by the National Natural Science Foundation of China (52008364).
References
Adesina, A., and S. Das. 2021. “Evaluation of the durability properties of engineered cementitious composites incorporating recycled concrete as aggregate.” J. Mater. Civ. Eng. 33 (2): 04020439. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003563.
Ahmed, W., and C. W. Lim. 2020. “Production of sustainable and structural fiber reinforced recycled aggregate concrete with improved fracture properties: A review.” J. Cleaner Prod. 279 (Jan): 123832. https://doi.org/10.1016/j.jclepro.2020.123832.
Alhawat, M., and A. Ashour. 2020. “Bond strength between corroded steel and recycled aggregate concrete incorporating nano silica.” Constr. Build. Mater. 237 (Mar): 117441. https://doi.org/10.1016/j.conbuildmat.2019.117441.
Aydin, E., and H. Ş. Arel. 2017. “Characterization of high-volume fly-ash cement pastes for sustainable construction applications.” Constr. Build. Mater. 157 (Dec): 96–107. https://doi.org/10.1016/j.conbuildmat.2017.09.089.
Bao, J. W., S. G. Li, Z. H. Yu, J. Xu, Y. L. Li, P. Zhang, Z. Si, and S. Gao. 2021. “Water transport in recycled aggregate concrete under sustained compressive loading: Experimental investigation and mesoscale numerical modeling.” J. Build. Mater. 49 (Dec): 103373. https://doi.org/10.1016/j.jobe.2021.10337.
Bao, J. W., S. G. Li, P. Zhang, X. Ding, S. Xue, Y. Cui, and T. Zhao. 2020. “Influence of the incorporation of recycled coarse aggregate on water absorption and chloride penetration into concrete.” Constr. Build. Mater. 239 (Apr): 117845. https://doi.org/10.1016/j.conbuildmat.2019.117845.
Boudali, S., B. Abdulsalam, A. H. Rafiean, S. Poncet, A. Soliman, and A. ElSafty. 2021. “Influence of fine recycled concrete powder on the compressive strength of self-compacting concrete (SCC) using artificial neural network.” Sustainability 13 (6): 3111. https://doi.org/10.3390/su13063111.
CS (Chinese Standard). 2004. Standard test method for drying shrinkage of mortar. JC/T603. Beijing: Chinese Standard Association.
CS (Chinese Standard). 2017. Fly ash used for cement and concrete. GB/T 1596. Beijing: General Administration of Quality.
Horsakulthai, V. 2021. “Effect of recycled concrete powder on strength, electrical resistivity, and water absorption of self-compacting mortars.” Case Stud. Constr. Mater. 15 (Dec): e00725. https://doi.org/10.1016/j.cscm.2021.e00725.
Jiang, C., K. Fan, F. Wu, and D. Chen. 2014. “Experimental study on the mechanical properties and microstructure of chopped basalt fibre reinforced concrete.” Mater. Des. 58 (Jun): 187–193. https://doi.org/10.1016/j.matdes.2014.01.056.
Kar, D., J. P. Giri, M. Panda, and U. Chattaraj. 2021. “Investigations on stone matrix asphalt mixes containing recycled concrete aggregate treated with nanosilica.” J. Mater. Civ. Eng. 33 (9): 04021228. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003834.
Kim, J. 2022. “Influence of quality of recycled aggregates on the mechanical properties of recycled aggregate concretes: An overview.” Constr. Build. Mater. 328 (Apr): 127071. https://doi.org/10.1016/j.conbuildmat.2022.127071.
Kim, Y. J., and Y. W. Choi. 2012. “Utilization of waste concrete powder as a substitution material for cement.” Constr. Build. Mater. 30 (May): 500–504. https://doi.org/10.1016/j.conbuildmat.2011.11.042.
Kou, S. C., and C. S. Poon. 2015. “Effect of the quality of parent concrete on the properties of high performance recycled aggregate concrete.” Constr. Build. Mater. 77 (Feb): 501–508. https://doi.org/10.1016/j.conbuildmat.2014.12.035.
Kurda, R., J. De Brito, and J. D. Silvestre. 2020. “A comparative study of the mechanical and life cycle assessment of high-content fly ash and recycled aggregates concrete.” J. Build. Eng. 29 (May): 101173. https://doi.org/10.1016/j.jobe.2020.101173.
Li, S., J. Gao, Q. Li, and X. Zhao. 2021. “Investigation of using recycled powder from the preparation of recycled aggregate as a supplementary cementitious material.” Constr. Build. Mater. 267 (Jan): 120976. https://doi.org/10.1016/j.conbuildmat.2020.120976.
Liang, C., Z. Cai, H. Wu, J. Xiao, Y. Zhang, and Z. Ma. 2021. “Chloride transport and induced steel corrosion in recycled aggregate concrete: A review.” Constr. Build. Mater. 282 (May): 122547. https://doi.org/10.1016/j.conbuildmat.2021.122547.
Liang, C., B. Pan, Z. Ma, Z. He, and Z. Duan. 2020. “Utilization of CO2 curing to enhance the properties of recycled aggregate and prepared concrete: A review.” Cem. Concr. Compos. 105 (Jan): 103446. https://doi.org/10.1016/j.cemconcomp.2019.103446.
Liu, M., C. Q. Wang, H. X. Wu, D. Y. Yang, and Z. M. Ma. 2022. “Reusing recycled powder as eco-friendly binder for sustainable GGBS-based geopolymer considering the effects of recycled powder type and replacement rate.” J. Cleaner Prod. 364 (Sep): 132656. https://doi.org/10.1016/j.jclepro.2022.132656.
Lu, B., C. Shi, J. Zhang, and J. Wang. 2018. “Effects of carbonated hardened cement paste powder on hydration and microstructure of Portland cement.” Constr. Build. Mater. 186 (Oct): 699–708. https://doi.org/10.1016/j.conbuildmat.2018.07.159.
Ma, Z., Q. Tang, H. Wu, J. Xu, and C. Liang. 2020. “Mechanical properties and water absorption of cement composites with various fineness and contents of waste brick powder from C&D waste.” Cem. Concr. Compos. 114 (Nov): 103758. https://doi.org/10.1016/j.cemconcomp.2020.103758.
Ma, Z., P. Yao, D. Yang, and J. Shen. 2021. “Effects of fire-damaged concrete waste on the properties of its preparing recycled aggregate, recycled powder and newmade concrete.” J. Mater. Res. Technol. 15 (Nov): 1030–1045. https://doi.org/10.1016/j.jmrt.2021.08.116.
Ma, Z. M., J. X. Shen, C. Q. Wang, and H. X. Wu. 2022. “Characterization of sustainable mortar containing high-quality recycled manufactured sand crushed from recycled coarse aggregate.” Cem. Concr. Compos. 132 (Sep): 104629. https://doi.org/10.1016/j.cemconcomp.2022.104629.
Mehdizadeh, H., T. C. Ling, X. Cheng, and K. H. Mo. 2021. “Effect of particle size and CO2 treatment of waste cement powder on properties of cement paste.” Can. J. Civ. Eng. 48 (5): 522–531. https://doi.org/10.1139/cjce-2019-0574.
Mosavinejad, S. G., M. A. M. Langaroudi, J. Barandoust, and A. Ghanizadeh. 2020. “Electrical and microstructural analysis of UHPC containing short PVA fibers.” Constr. Build. Mater. 235 (Feb): 117448. https://doi.org/10.1016/j.conbuildmat.2019.117448.
Ravathi, M. C., R. Chithra, and E. Saranya. 2022. “Experimental and analytical evaluation of the mechanical properties of high-strength self-curing concrete with recycled fine aggregates.” J. Mater. Civ. Eng. 34 (4): 04022017. https://doi.org/10.1061/(ASCE)MT.1943-5533.0004152.
Revilla-Cuesta, V., M. Skaf, A. Santamaría, J. J. Hernández-Bagaces, and V. Ortega-López. 2021. “Temporal flowability evolution of slag-based self-compacting concrete with recycled concrete aggregate.” J. Cleaner Prod. 299 (May): 126890. https://doi.org/10.1016/j.jclepro.2021.126890.
Shaban, W. M., J. Yang, H. Su, K. H. Mo, L. Li, and J. Xie. 2019. “Quality improvement techniques for recycled concrete aggregate: A review.” J. Adv. Concr. Technol. 17 (4): 151–167. https://doi.org/10.3151/jact.17.151.
Shen, P., L. Lu, Y. He, F. Wang, and S. Hu. 2019. “The effect of curing regimes on the mechanical properties, nano-mechanical properties and microstructure of ultra-high performance concrete.” Cem. Concr. Res. 118 (Apr): 1–13. https://doi.org/10.1016/j.cemconres.2019.01.004.
Tam, V. W., and C. M. Tam. 2008. “Diversifying two-stage mixing approach (TSMA) for recycled aggregate concrete: TSMAs and TSMAsc.” Constr. Build. Mater. 22 (10): 2068–2077. https://doi.org/10.1016/j.conbuildmat.2007.07.024.
Tang, Q., Z. Ma, H. Wu, and W. Wang. 2020. “The utilization of eco-friendly recycled powder from concrete and brick waste in new concrete: A critical review.” Cem. Concr. Compos. 114 (Nov): 103807. https://doi.org/10.1016/j.cemconcomp.2020.103807.
Wang, C., J. Xiao, D. Wang, and Z. Ma. 2022. “Unloading and reloading stress-strain relationship of recycled aggregate concrete reinforced with steel/polypropylene fibers under uniaxial low-cycle loadings.” Cem. Concr. Compos. 131 (Aug): 104597. https://doi.org/10.1016/j.cemconcomp.2022.104597.
Wang, D., C. Shi, Z. Wu, J. Xiao, Z. Huang, and Z. Fang. 2015. “A review on ultra high performance concrete: Part II. Hydration, microstructure and properties.” Constr. Build. Mater. 96 (Oct): 368–377. https://doi.org/10.1016/j.conbuildmat.2015.08.095.
Wang, Y., Y. Cao, P. Zhang, Y. Ma, T. Zhao, H. Wang, and Z. Zhang. 2019. “Water absorption and chloride diffusivity of concrete under the coupling effect of uniaxial compressive load and freeze–thaw cycles.” Constr. Build. Mater. 209 (Jun): 566–576. https://doi.org/10.1016/j.conbuildmat.2019.03.091.
Wang, Y., Z. Deng, J. Xiao, T. Li, and J. Li. 2021. “Mechanical properties of recycled aggregate concrete under compression-shear stress state.” Constr. Build. Mater. 271 (Feb): 121894. https://doi.org/10.1016/j.conbuildmat.2020.121894.
Wang, Z. R., B. Li, H. B. Liu, Y. X. Zhang, and X. Qin. 2020. “Degradation characteristics of graphite tailings cement mortar subjected to freeze-thaw cycles.” Constr. Build. Mater. 234 (Feb): 117422. https://doi.org/10.1016/j.conbuildmat.2019.117422.
Wu, H., C. Wang, and Z. Ma. 2022. “Drying shrinkage, mechanical and transport properties of sustainable mortar with both recycled aggregate and powder from concrete waste.” J. Build. Eng. 49 (May): 104048. https://doi.org/10.1016/j.jobe.2022.104048.
Wu, H., J. Xu, D. Yang, and Z. Ma. 2021a. “Utilizing thermal activation treatment to improve the properties of waste cementitious powder and its newmade cementitious materials.” J. Cleaner Prod. 322 (Nov): 129074. https://doi.org/10.1016/j.jclepro.2021.129074.
Wu, H., D. Yang, J. Xu, C. Liang, and Z. Ma. 2021b. “Water transport and resistance improvement for the cementitious composites with eco-friendly powder from various concrete wastes.” Constr. Build. Mater. 290 (Jul): 123247. https://doi.org/10.1016/j.conbuildmat.2021.123247.
Xiao, J., Z. Ma, T. Sui, A. Akbarnezhad, and Z. Duan. 2018. “Mechanical properties of concrete mixed with recycled powder produced from construction and demolition waste.” J. Cleaner Prod. 188 (Jul): 720–731. https://doi.org/10.1016/j.jclepro.2018.03.277.
Xie, J., J. Zhao, J. Wang, C. Wang, P. Huang, and C. Fang. 2019. “Sulfate resistance of recycled aggregate concrete with GGBS and fly ash-based geopolymer.” Materials 12 (8): 1247. https://doi.org/10.3390/ma12081247.
Xue, S. B., P. Zhang, J. J. Wang, J. W. Bao, S. B. Han, and L. F. He. 2021. “Influences of thermal damage on water transport in heat-treated cement mortar: Experimental and theoretical analyses.” Constr. Build. Mater. 288 (Jun): 123100. https://doi.org/10.1016/j.conbuildmat.2021.123100.
Yu, K. Q., W. J. Zhu, Y. Ding, Z. D. Lu, J. T. Yu, and J. Z. Xiao. 2019. “Micro-structural and mechanical properties of ultra-high performance engineered cementitious composites (UHP-ECC) incorporation of recycled fine powder (RFP).” Cem. Concr. Res. 124 (Oct): 105813. https://doi.org/10.1016/j.cemconres.2019.105813.
Zega, C. J., L. R. Santillán, M. E. Sosa, and Y. A. Villagrán Zaccardi. 2020. “Durable performance of recycled aggregate concrete in aggressive environments.” J. Mater. Civ. Eng. 32 (7): 03120002. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003253.
Zhang, H., J. Xiao, Y. Tang, Z. Duan, and C. S. Poon. 2022. “Long-term shrinkage and mechanical properties of fully recycled aggregate concrete: Testing and modeling.” Cem. Concr. Compos. 130 (Jul): 104527. https://doi.org/10.1016/j.cemconcomp.2022.104527.
Zhang, P., F. H. Wittmann, M. Vogel, H. S. Müller, and T. J. Zhao. 2017. “Influence of freeze-thaw cycles on capillary absorption and chloride penetration into concrete.” Cem. Concr. Res. 100 (10): 60–67. https://doi.org/10.1016/j.cemconres.2017.05.018.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 14, 2022
Accepted: Jul 6, 2022
Published online: Dec 28, 2022
Published in print: Mar 1, 2023
Discussion open until: May 28, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Shaodan Hou, Changyu Fang, Shangquan Chen, Yueqing Gao, Chaofeng Liang, Mingzhi Guo, Jun Ye, Zhiming Ma, Effect of Recycled Brick Powder on Corrosion of Reinforced Concrete under the Action of Chloride or Carbonation, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17897, 36, 10, (2024).
- Junyi Xiao, Jianxin Peng, C. S. Cai, Hanbing Bian, Jianren Zhang, Experimental Study of Shrinkage and Creep Behaviors of Low-Shrinkage and Low-Creep C60 High-Performance Concrete and Parameter Recommendations, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17812, 36, 8, (2024).
- Dashuai Zhang, Xingli Zhang, Haotian Tang, Yuntian Bai, Zhi Jia, Jing Guo, Honghua Zhao, Development of a Novel Type of Liquid Accelerator Based on Aluminum Sulfate and Its Accelerating Mechanism for Cement Hydration, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16404, 36, 1, (2024).