Continuous Monitoring of the Early-Age Properties of Activated GGBFS with Alkaline Solutions of Different Concentrations
Publication: Journal of Materials in Civil Engineering
Volume 33, Issue 12
Abstract
This study monitors the early-age reaction kinetics and measures the heat of reaction of alkali-activated ground granulated blast-furnace slag (GGBFS) using an isothermal calorimeter, and the initial setting and possible product formations by measuring ultrasonic pulse velocity (UPV). The GGBFS was activated with alkaline activator solutions of different concentrations in terms of modulus ratio () and content. Results reveal that GGBFS is highly sensitive to the compositions of the alkaline solutions. Increasing the alkalinity of the activator results in better dissolution of species and consequently an increased heat evolution with a relatively shorter setting time. The activator concentration also affects the rate of product formations as well as the morphological features. Activators with higher lead to homogeneous slag morphology. The abundance of silicate species in the alkaline solution also plays an important role in its structural formation. scanning electron microscope with energy-dispersive X-ray spectroscopy (SEM-EDS) microstructural characterizations supports the advanced dissolution of particles in a more alkaline environment. The presence of C-(A)-S-H gels in alkali-activated slag pastes was detected.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was funded by the CRC for Low Carbon Living Ltd. (Grant No. RP1020) supported by the Cooperative Research Centres program, an Australian Government initiative. The support of the CRC is acknowledged with thanks. The authors also acknowledge the instruments and scientific and technical assistance of Microscopy Australia at the Electron Microscope Unit, UNSW, a facility that is funded by the University, and state and federal governments.
References
Altan, E., and S. T. Erdoğan. 2012. “Alkali activation of a slag at ambient and elevated temperatures.” Cem. Concr. Compos. 34 (2): 131–139. https://doi.org/10.1016/j.cemconcomp.2011.08.003.
Babaee, M., and A. Castel. 2018. “Chloride diffusivity, chloride threshold, and corrosion initiation in reinforced alkali-activated mortars: Role of calcium, alkali, and silicate content.” Cem. Concr. Res. 111 (Sep): 56–71. https://doi.org/10.1016/j.cemconres.2018.06.009.
Bentz, D. P., M. A. Peltz, and J. Winpigler. 2009. “Early-age properties of cement-based materials. II: Influence of water-to-cement ratio.” J. Mater. Civ. Eng. 21 (9): 512–517. https://doi.org/10.1061/(ASCE)0899-1561(2009)21:9(512).
Bernal, S. A., E. D. Rodríguez, R. Mejía de Gutiérrez, and J. L. Provis. 2012. “Performance of alkali-activated slag mortars exposed to acids.” J. Sustainable Cem.-Based Mater. 1 (3): 138–151. https://doi.org/10.1080/21650373.2012.747235.
Bougara, A., C. Lynsdale, and N. B. Milestone. 2010. “Reactivity and performance of blastfurnace slags of differing origin.” Cem. Concr. Compos. 32 (4): 319–324. https://doi.org/10.1016/j.cemconcomp.2009.12.002.
Brough, A. R., and A. Atkinson. 2002. “Sodium silicate-based, alkali-activated slag mortars: Part I. Strength, hydration and microstructure.” Cem. Concr. Res. 32 (6): 865–879. https://doi.org/10.1016/S0008-8846(02)00717-2.
Buchwald, A., R. Tatarin, and D. Stephan. 2009. “Reaction progress of alkaline-activated metakaolin-ground granulated blast furnace slag blends.” J. Mater. Sci. 44 (20): 5609–5617. https://doi.org/10.1007/s10853-009-3790-3.
Cao, R., S. Zhang, N. Banthia, Y. Zhang, and Z. Zhang. 2020. “Interpreting the early-age reaction process of alkali-activated slag by using combined embedded ultrasonic measurement, thermal analysis, XRD, FTIR and SEM.” Composites, Part B 186 (Apr): 107840. https://doi.org/10.1016/j.compositesb.2020.107840.
Carette, J., and S. Staquet. 2016. “Monitoring and modelling the early age and hardening behaviour of eco-concrete through continuous non-destructive measurements: Part II. Mechanical behaviour.” Cem. Concr. Compos. 73 (Oct): 1–9. https://doi.org/10.1016/j.cemconcomp.2016.07.003.
Chang, J. J. 2003. “A study on the setting characteristics of sodium silicate-activated slag pastes.” Cem. Concr. Res. 33 (7): 1005–1011. https://doi.org/10.1016/S0008-8846(02)01096-7.
Chithiraputhiran, S., and N. Neithalath. 2013. “Isothermal reaction kinetics and temperature dependence of alkali activation of slag, fly ash and their blends.” Constr. Build. Mater. 45 (Aug): 233–242. https://doi.org/10.1016/j.conbuildmat.2013.03.061.
Collins, F., and J. G. Sanjayan. 1999. “Strength and shrinkage properties of alkali-activated slag concrete placed into a large column.” Cem. Concr. Res. 29 (5): 659–666. https://doi.org/10.1016/S0008-8846(99)00011-3.
de Vargas, A. S., D. C. C. Dal Molin, A. C. F. Vilela, F. J. da Silva, B. Pavão, and H. Veit. 2011. “The effects of molar ratio, curing temperature and age on compressive strength, morphology and microstructure of alkali-activated fly ash-based geopolymers.” Cem. Concr. Compos. 33 (6): 653–660. https://doi.org/10.1016/j.cemconcomp.2011.03.006.
Ding, Y., J.-G. Dai, and C.-J. Shi. 2018. “Fracture properties of alkali-activated slag and ordinary portland cement concrete and mortar.” Constr. Build. Mater. 165 (Mar): 310–320. https://doi.org/10.1016/j.conbuildmat.2017.12.202.
Dongyu, X., H. Shifeng, Q. Lei, L. Lingchao, and C. Xin. 2012. “Monitoring of cement hydration reaction process based on ultrasonic technique of piezoelectric composite transducer.” Constr. Build. Mater. 35 (Oct): 220–226. https://doi.org/10.1016/j.conbuildmat.2012.02.094.
Fernández-Jiménez, A., and F. Puertas. 2001. “Setting of alkali-activated slag cement. Influence of activator nature.” Adv. Cem. Res. 13 (3): 115–121. https://doi.org/10.1680/adcr.2001.13.3.115.
Fernández-Jiménez, A., and F. Puertas. 2003. “Effect of activator mix on the hydration and strength behaviour of alkali-activated slag cements.” Adv. Cem. Res. 15 (3): 129–136. https://doi.org/10.1680/adcr.2003.15.3.129.
Foster, S. J., J. X. Shen, A. Parvez, J. Aldred, C. Heidrich, A. Doraiswamy, and T. Glasby. 2019. Installation of geopolymer concrete pavement at Wyndham Street for City of Sydney: Interim report. Sydney, Australia: CRC for Low Carbon Living.
Gawlicki, M., W. Nocuń-Wczelik, and Ł. Bąk. 2010. “Calorimetry in the studies of cement hydration: Setting and hardening of portland cement–calcium aluminate cement mixtures.” J. Therm. Anal. Calorim. 100 (2): 571–576. https://doi.org/10.1007/s10973-009-0158-5.
Glukhovsky, V. D. 1965. “Soil silicates: Their properties, technology and manufacturing and fields of application.” D.Tech. Sc. thesis, Dept. of Civil Engineering, Civil Engineering Institute.
Haha, M. B., B. Lothenbach, G. L. Le Saout, and F. Winnefeld. 2011. “Influence of slag chemistry on the hydration of alkali-activated blast-furnace slag—Part I: Effect of MgO.” Cem. Concr. Res. 41 (9): 955–963. https://doi.org/10.1016/j.cemconres.2011.05.002.
Jang, J. G., N. K. Lee, and H.-K. Lee. 2014. “Fresh and hardened properties of alkali-activated fly ash/slag pastes with superplasticizers.” Constr. Build. Mater. 50 (Jan): 169–176. https://doi.org/10.1016/j.conbuildmat.2013.09.048.
Krizan, D., and B. Zivanovic. 2002. “Effects of dosage and modulus of water glass on early hydration of alkali–slag cements.” Cem. Concr. Res. 32 (8): 1181–1188. https://doi.org/10.1016/S0008-8846(01)00717-7.
Li, R., Q.-Q. Ni, H. Xia, and T. Natsuki. 2018. “Analysis of individual attenuation components of ultrasonic waves in composite material considering frequency dependence.” Composites, Part B 140 (May): 232–240. https://doi.org/10.1016/j.compositesb.2016.03.045.
Livesey, P., A. Donnelly, and C. Tomlinson. 1991. “Measurement of the heat of hydration of cement.” Cem. Concr. Compos. 13 (3): 177–185. https://doi.org/10.1016/0958-9465(91)90018-D.
Mahmood, A. H., S. J. Foster, A. Castell, B. Modra, C. Heidrich, G. Tory, R. Genrich, and P. Engelen. 2018. “Development of high-density geopolymer concrete for breakwater armour units for Port Kembla harbour.” Concr. Aust. 44 (4): 34–39.
Nath, S. K., and S. Kumar. 2013. “Influence of iron making slags on strength and microstructure of fly ash geopolymer.” Constr. Build. Mater. 38 (Jan): 924–930. https://doi.org/10.1016/j.conbuildmat.2012.09.070.
Pacheco-Torgal, F., J. Castro-Gomes, and S. Jalali. 2008. “Alkali-activated binders: A review. Part 2. About materials and binders manufacture.” Constr. Build. Mater. 22 (7): 1315–1322. https://doi.org/10.1016/j.conbuildmat.2007.03.019.
Palacios, M., P. F. Banfill, and F. Puertas. 2008. “Rheology and setting of alkali-activated slag pastes and mortars: Effect of organic admixture.” ACI Mater. J. 105 (2): 140.
Princigallo, A., P. Lura, K. van Breugel, and G. Levita. 2003. “Early development of properties in a cement paste: A numerical and experimental study.” Cem. Concr. Res. 33 (7): 1013–1020. https://doi.org/10.1016/S0008-8846(03)00002-4.
Provis, J. L. 2018. “Alkali-activated materials.” Cem. Concr. Res. 114 (Dec): 40–48. https://doi.org/10.1016/j.cemconres.2017.02.009.
Provis, J. L., R. J. Myers, C. E. White, V. Rose, and J. S. J. Van Deventer. 2012. “X-ray microtomography shows pore structure and tortuosity in alkali-activated binders.” Cem. Concr. Res. 42 (6): 855–864. https://doi.org/10.1016/j.cemconres.2012.03.004.
Ravikumar, D., and N. Neithalath. 2012. “Reaction kinetics in sodium silicate powder and liquid activated slag binders evaluated using isothermal calorimetry.” Thermochim. Acta 546 (Oct): 32–43. https://doi.org/10.1016/j.tca.2012.07.010.
Rees, C. A., J. L. Provis, G. C. Lukey, and J. S. J. Van Deventer. 2007. “In situ ATR-FTIR study of the early stages of fly ash geopolymer gel formation.” Langmuir 23 (17): 9076–9082. https://doi.org/10.1021/la701185g.
Reinhardt, H. W., C. U. Grobe, and A. T. Herb. 2000. “Ultrasonic monitoring of setting and hardening of cement mortar—A new device.” Mater. Struct. 33 (9): 580–583. https://doi.org/10.1007/BF02480539.
Reinhardt, H. W., and C. U. Grosse. 2004. “Continuous monitoring of setting and hardening of mortar and concrete.” Constr. Build. Mater. 18 (3): 145–154. https://doi.org/10.1016/j.conbuildmat.2003.10.002.
Shi, C., and R. L. Day. 1995. “A calorimetric study of early hydration of alkali-slag cements.” Cem. Concr. Res. 25 (6): 1333–1346. https://doi.org/10.1016/0008-8846(95)00126-W.
Sun, J., and Z. Chen. 2019. “Effect of silicate modulus of water glass on the hydration of alkali-activated converter steel slag.” J. Therm. Anal. Calorim. 138 (1): 47–56. https://doi.org/10.1007/s10973-019-08146-3.
Sun, Z., and A. Vollpracht. 2018. “Isothermal calorimetry and in-situ XRD study of the NaOH activated fly ash, metakaolin and slag.” Cem. Concr. Res. 103 (Jan): 110–122. https://doi.org/10.1016/j.cemconres.2017.10.004.
Thomas, J. J., J. J. Biernacki, J. W. Bullard, S. Bishnoi, J. S. Dolado, G. W. Scherer, and A. Luttge. 2011. “Modeling and simulation of cement hydration kinetics and microstructure development.” Cem. Concr. Res. 41 (12): 1257–1278. https://doi.org/10.1016/j.cemconres.2010.10.004.
Van Deventer, J. S. J., J. L. Provis, and P. Duxson. 2012. “Technical and commercial progress in the adoption of geopolymer cement.” Miner. Eng. 29 (Mar): 89–104. https://doi.org/10.1016/j.mineng.2011.09.009.
Wadsö, L. 2002. Isothermal calorimetry for the study of cement hydration. Lund, Sweden: Div. of Building Materials, Lund Univ.
Xie, F., Z. Liu, D. Zhang, J. Wang, T. Huang, and D. Wang. 2020. “Reaction kinetics and kinetics models of alkali activated phosphorus slag.” Constr. Build. Mater. 237 (Mar): 117728. https://doi.org/10.1016/j.conbuildmat.2019.117728.
Yao, X., Z. Zhang, H. Zhu, and Y. Chen. 2009. “Geopolymerization process of alkali–metakaolinite characterized by isothermal calorimetry.” Thermochim. Acta 493 (1–2): 49–54. https://doi.org/10.1016/j.tca.2009.04.002.
Ylmén, R., L. Wadsö, and I. Panas. 2010. “Insights into early hydration of portland limestone cement from infrared spectroscopy and isothermal calorimetry.” Cem. Concr. Res. 40 (10): 1541–1546. https://doi.org/10.1016/j.cemconres.2010.06.008.
Yurt, Ü. 2020a. “An experimental study on fracture energy of alkali activated slag composites incorporated different fibers.” J. Build. Eng. 32 (Nov): 101519. https://doi.org/10.1016/j.jobe.2020.101519.
Yurt, Ü. 2020b. “High performance cementless composites from alkali activated GGBFS.” Constr. Build. Mater. 264 (Dec): 120222. https://doi.org/10.1016/j.conbuildmat.2020.120222.
Zhang, S., Y. Zhang, and Z. Li. 2018. “Ultrasonic monitoring of setting and hardening of slag blended cement under different curing temperatures by using embedded piezoelectric transducers.” Constr. Build. Mater. 159 (Jan): 553–560. https://doi.org/10.1016/j.conbuildmat.2017.10.124.
Zhu, X., M. Zhang, K. Yang, L. Yu, and C. Yang. 2020. “Setting behaviours and early-age microstructures of alkali-activated ground granulated blast furnace slag (GGBS) from different regions in China.” Cem. Concr. Compos. 114 (Nov): 103782. https://doi.org/10.1016/j.cemconcomp.2020.103782.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 25, 2020
Accepted: Apr 22, 2021
Published online: Oct 4, 2021
Published in print: Dec 1, 2021
Discussion open until: Mar 4, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ivo C. Carvalho, André R. Chaves, Clédson L. Araújo, Heloina N. Costa, Antônio E. B. Cabral, Mechanical, Rheological, and Microstructural Study of Ternary Alkali-Activated Pastes Using BOF Slag, Metakaolin, and Glass Powder as Precursors, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17132, 36, 6, (2024).
- Xiaodi Dai, Mert Yücel Yardimci, Serdar Aydin, Geert De Schutter, Reaction Kinetics and Fresh State Properties of Alkali-Activated Slag Mixtures with Secondary Precursors, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-16608, 36, 2, (2024).
- Rongjin Cai, Hailong Ye, In Situ Spectroscopic Insights into the Setting Performance of Alkali-Activated Slag, Journal of Materials in Civil Engineering, 10.1061/(ASCE)MT.1943-5533.0004582, 35, 2, (2023).
- Souradeep Gupta, Aziz Hasan Mahmood, A multi-method investigation into rheological properties, hydration, and early-age strength of cement composites with admixtures recovered from inorganic and bio-based waste streams, Construction and Building Materials, 10.1016/j.conbuildmat.2022.128529, 347, (128529), (2022).
- Aziz Hasan Mahmood, Mahdi Babaee, Stephen J. Foster, Arnaud Castel, Capturing the early-age physicochemical transformations of alkali-activated fly ash and slag using ultrasonic pulse velocity technique, Cement and Concrete Composites, 10.1016/j.cemconcomp.2022.104529, 130, (104529), (2022).