Modelling of Tracks at Transition Zones: Analytical and Numerical Modelling Approach
Publication: Geo-Congress 2023
ABSTRACT
Rail track transitions are the discontinuities along the railway lines where conventional track adjoins the tunnels and bridges and are responsible for a sudden change in track structural properties. Frequent movement of fast passenger trains and heavy freights cause enhanced impact loads and differential settlements at these transitions that further lead to accelerated track degradation and increased maintenance costs. This paper presents a brief introduction to track transitions, the associated problems, and their causes and explains the occurrence of differential settlement at track transitions through analytical and numerical (2D FEM) modelling approaches. The stiffness effect on track settlement response under train loading is investigated, considering an Euler-Bernoulli beam on elastic foundation (BOEF). Vertical displacements of the track are calculated for various track stiffness values under train wheel loading (P = 10 tonnes). The results proved that the stiffer tracks undergo lesser settlements than the softer tracks. The effect of sudden stiffness variation is investigated by considering a one-step track transition where the stiffness suddenly changes from 80 MN/m (slab track) to 5 MN/m (ballast track). The results show that the settlement on ballasted track is almost 12 times greater than those on the slab track resulting in a large differential settlement at track transition.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Choi, J. 2013. “Influence of track support stiffness of ballasted track on dynamic wheel-rail forces.” Journal of transportation engineering 139(7): 709–718. https://doi.org/10.1061/(ASCE)TE.1943-5436.0000543.
Czyczula, W., P. Koziol, and D. Blaszkiewicz. 2017. “On the equivalence between static and dynamic railway track response and on the euler-bernoulli and timoshenko beams analogy.” Shock and Vibration 2017: 13. https://doi.org/10.1155/2017/2701715.
Dahlberg, T. 2010. “Railway track stiffness variations - consequences and countermeasures.” International Journal of Civil Engineering 8(1): 1–12. http://ijce.iust.ac.ir/article-1-420-en.html.
Ding, H., L.-Q. Chen, and S.-P. Yang. 2012. “Convergence of galerkin truncation for dynamic response of finite beams on nonlinear foundations under a moving load.” Journal of Sound and Vibration 331(10): 2426–2442.
Froio, D., E. Rizzi, F. M. Simões, and A. P. Da Costa. 2018. “Universal analytical solution of the steady-state response of an infinite beam on a pasternak elastic foundation under moving load.” International Journal of Solids and Structures 132: 245–263.
Heydari-Noghabi, H., J. N. Varandas, M. Esmaeili, and J. Zakeri. 2017. “Investigating the influence of auxiliary rails on dynamic behavior of railway transition zone by a 3d train-track interaction model.” Latin American Journal of Solids and Structures 14: 2000–2018. https://doi.org/10.1590/1679-78253906.
Huang, H., and B. Brennecke. 2013. “Track stiffness transition zone studied with three-dimensional sandwich track model.” Transportation Research Record: Journal of the Transportation Research Board(2374): 136–142. https://doi.org/10.3141/2374-16.
Indraratna, B., M. B. Sajjad, T. Ngo, A. G. Correia, and R. Kelly. 2019. “Improved performance of ballasted tracks at transition zones: A review of experimental and modelling approaches.” Transportation Geotechnics 21: 100260. https://doi.org/10.1016/j.trgeo.2019.100260.
Indraratna, B., W. Salim, and C. Rujikiatkamjorn 2011. Advanced rail geotechnology–ballasted track. CRC press, Netherlands. https://doi.org/10.1201/b10861.
Kerr, A. D., and B. E. Moroney. 1993. “Track transition problems and remedies.” Bulletin American Railway Engineering Association(742): 267–298.
Koh, C., J. Ong, D. Chua, and J. Feng. 2003. “Moving element method for train‐track dynamics.” International Journal for Numerical Methods in Engineering 56(11): 1549–1567.
Lei, X., and B. Zhang. 2010. “Influence of track stiffness distribution on vehicle and track interactions in track transition.” Journal of Rail and Rapid Transit 224(6): 592–604. https://doi.org/10.1243/09544097JRRT318.
Li, D., and D. Davis. 2005. “Transition of railroad bridge approaches.” Journal of Geotechnical and Geoenvironmental Engineering 131(11): 1392–1398. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:11(1392).
Li, D., J. Hyslip, T. Sussmann, and S. Chrismer 2016. Railway geotechnics. CRC Press, London.
Li, Z., and T. Wu. 2008. Vehicle/track impact due to passing the transition between a floating slab and ballasted track. Noise and vibration mitigation for rail transportation systems, Springer: 94–100.
Lundqvist, A., R. Larsson, and T. Dahlberg. 2006. “Influence of railway track stiffness variations on wheel/rail contact force.” Track for High-Speed Railways, Porto, Portugal.
Read, D., and D. Li 2006. “Design of track transitions.” TCRP Research Results Digest.
Sañudo, R., L. Dell’Olio, J. Casado, I. Carrascal, and S. Diego. 2016. “Track transitions in railways: A review.” Construction and Building Materials 112: 140–157. https://doi.org/10.1016/j.conbuildmat.2016.02.084.
Uzzal, R. U. A., W. Ahmed, and S. Rakheja. 2008. “Dynamic analysis of railway vehicle-track interactions due to wheel flat with a pitch-plane vehicle model.” Journal of Mechanical Engineering 39(2): 86–94.
Information & Authors
Information
Published In
Geo-Congress 2023
Pages: 22 - 29
History
Published online: Mar 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.