Stability Analysis of Infinite Unsaturated Soil Slope Based on Analytical Probabilistic Approach
Publication: Geo-Congress 2023
ABSTRACT
Most infinite slopes in tropical climates are frequently unsaturated in the beginning, and along with many soil properties like cohesion and friction, stability of these slopes is largely dependent on matric suction. These parameters are highly variable in the evaluation of slope stability for unsaturated soil. Hence, deterministic analysis is not enough to draw conclusions regarding stability of unsaturated slopes. This paper presents an analytical probabilistic method based on the theory of multivariate probability distribution to determine the stability of infinite unsaturated slopes. The stochastic soil parameters used in the study are cohesion, friction angle, unit weight, and matric suction. All the stochastic parameters were treated as uncertain variables which were defined by the normal distribution. The geometry-related parameters such as slope angle, slope height, and few stress variables such as net normal stress were regarded as deterministic parameters. The stability of the slope was determined by calculating the reliability index. Furthermore, the calculation formula for the probability density of slope safety factors was established. To inspect the correctness of the present methodology, the probability density of safety factors was determined by considering a conceptual infinite slope with arbitrary parameter values. Results showed that for the assumed set of parameters, the slope fails to meet the reliability index criteria of stability. A comparison between the outputs determined by the proposed technique and the Monte Carlo method indicates that the proposed methodology is efficient in order to calculate the stability of unsaturated slopes while taking the variability of various soil characteristics into account.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ang, A. H.-S., and Tang, W. H. (1984). Probability concepts in engineering planning and Design, vol. 2: decision, risk, and reliability, illustrated edition. Wiley, New York.
Bishop, A. W. (1954). “The use of pore-pressure coefficients in practice.” Geotechnique, 4(4), 148–152.
Brejda, J. J., Moorman, T. B., Smith, J. L., Karlen, D. L., Allan, D. L., and Dao, T. H. (2000). “Distribution and variability of surface soil properties at a regional scale.” Soil. Sci. Soc. Am. J., 64, 974–982.
Chatterjee, K., and Choudhury, D. (2014). “Seismic analysis of soil slopes using FLAC2D and modified Newmark’s approach.” In Geo-Congress 2014: Geotechnical Special Publication, 234, 1196–1205.
Cho, S. E., and Lee, S. R. (2002). “Evaluation of surficial stability for homogeneous slopes considering rainfall characteristics.” J. Geotech. Geoenviron. Eng., 128(9), 756–763.
Choudhury, D., and Modi, D. (2008). “Displacement-based seismic stability analyses of reinforced and unreinforced slopes using planar failure surfaces.” In Geotechnical Earthquake Engineering and Soil Dynamics IV 2008, Geotechnical Special Publication No. 181, 1–10.
Choudhury, D., Basu, S., and Bray, J. D. (2007). “Behaviour of slopes under static and seismic conditions by limit equilibrium method.” In Geo-Denver 2007: New Peaks in Geotechnics, In Embankments, Dams and Slopes: Lessons from the New Orleans Levee Failures and Other Current Issues, Geotechnical Special Publication No. 161, 1–10.
Das, T., and Choudhury, D. (2022). “Stability analysis of seismically induced landslide using coupled Eulerian-Lagrangian finite element analysis.” In: Rahman, Jaksa (eds) Proceedings of the 20th international conference on soil mechanics and geotechnical engineering (20ICSMGE), Sydney, Australia, 2, 2411–2415.
Das, T., Rao, V. D., and Choudhury, D. (2022a). “Numerical investigation of the stability of landslide-affected slopes in Kerala, India, under extreme rainfall event.” Nat. Hazards, 114, 751–785.
Das, T., Rao, V. D., and Choudhury, D. (2022b). “Seismic Stability and Deformation Analysis of a Southern Indian Hill Slope by Finite Elements.” Nat. Hazards Rev., ASCE (accepted, in press with MS# NHENG-1669R1).
Fredlund, D. G., and Rahardjo, H. (1993). Soil mechanics for unsaturated soils, John Wiley & Sons, Inc., New York.
Fredlund, D. G., Xing, A., Fredlund, M. D., and Barbour, S. L. (1996). “The relationship of the unsaturated soil shear strength to the soil-water characteristic curve.” Can. Geotech. J., 33(3), 440–448.
Griffiths, D. V., and Fenton, G. A. (2004). “Probabilistic slope stability analysis by finite elements.” J. Geotech. Geoenviron. Eng., 130, 507–518.
Hasofer, A. M., and Lind, N. C. (1973). An exact and invariant first-order reliability format. Solid Mechanics Division, University of Waterloo, Waterloo, Canada.
Lumb, P. (1966). “The variability of natural soils.” Can. Geotech. J., 3, 74–97.
Lumb, P. (1970). “Safety factors and the probability distribution of soil strength.” Can. Geotech. J., 7,225–242.
Metropolis, N., and Ulam, S. (1949). “The Monte Carlo method.” J. Am. Stat. Assoc., 44,335–341.
Rao, P. J., Babu, G. L. S., Kumar, K., and Panigrahi, R. K. (1997). “Investigation, instrumentation and monitoring of landslide at Powari, Kinnaur district (HP)-a case study.” Journal of the Indian Roads Congress, 58, 2.
Rosenblueth, E. (1975). “Point estimates for probability moments.” Proc. Natl. Acad. Sci. USA, 72, 3812–3814.
Sangroya, R., and Choudhury, D. (2013). “Stability analysis of soil slope subjected to blast induced vibrations using FLAC3D.” In Geo-Congress 2013: Stability and Performance of Slopes and Embankments III, 231, 472–481.
Sivakumar Babu, G. L., and Murthy, D. S. (2005). Reliability analysis of unsaturated soil slopes. J. Geotech. Geoenviron. Eng., 131(11), 1423–1428.
Terzaghi, K. (1943). Theoretical Soil Mechanics, John Wiley & Sons, New York.
Tobutt, D. C. (1982). “Monte Carlo simulation methods for slope stability.” Comput. Geosci., 8, 199–208.
Travis, Q. B., Houston, S. L., Marinho, F. A. M., and Schmeeckle, M. (2010). “Unsaturated infinite slope stability considering surface flux conditions.” J. Geotech. Geoenviron. Eng., 963–974.
USACE. (1999). Risk-based analysis in geotechnical engineering for support of planning studies, engineering and design., Dept. of Army, Washington, D.C.
Vanapalli, S. K., Fredlund, D. G., Pufahl, D. E., and Clifton, A. W. (1996). Model for the prediction of shear strength with respect to soil suction. Can. Geotech. J., 33(3), 379–392.
Information & Authors
Information
Published In
History
Published online: Mar 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.