Planetary Construction 3D Printing Using Lunar and Martian In Situ Materials
Publication: Earth and Space 2022
ABSTRACT
Through the Artemis program, NASA will extensively explore the Moon in preparation for the first human mission to Mars. NASA is planning to return to the Moon in the next few years, to establish a strategic presence at the Lunar south pole. To promote a long-term sustained presence, planetary surface construction technologies are needed to build a variety of supporting structures such as habitats, radiation shields, protective hangars, and launching and landing pads. Construction 3D printing (C3DP) is an autonomous construction technology that employs the principles of additive manufacturing on a structure scale. While C3DP has been mainly used for terrestrial construction, it is also considered a viable robotic construction technology for planetary infrastructure buildup. In this paper, the challenges and possibilities of extrusion-based planetary C3DP will be discussed in detail. Moreover, the results of an ongoing experimental study, as well as future research plans will be presented.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Bristow, T. F., Rampe, E. B., Achilles, C. N., Blake, D. F., Chipera, S. J., Craig, P., Crisp, J. A., Des Marais, D. J., Downs, R. T., and Gellert, R. (2018). Clay mineral diversity and abundance in sedimentary rocks of Gale crater, Mars. Science Advances, 4(6), eaar3330.
Cannon, K. M., Britt, D. T., Smith, T. M., Fritsche, R. F., and Batcheldor, D. (2019). Mars global simulant MGS-1: A Rocknest-based open standard for basaltic martian regolith simulants. Icarus, 317, 470–478.
CLASS Exolith Lab. (n.d.). Martian, Lunar and Asteriod Regolith Simulants. Retrieved November 1, 2021, from https://exolithsimulants.com/collections/regolith-simulants
Edmunson, J., Fiske, M., Mueller, R., Alkhateb, H., Akhnoukh, A., Morris, H., Townsend, I., Fikes, J., and Johnston, M. (2018). Additive construction with mobile emplacement: Multifaceted planetary construction materials development. In Earth and Space 2018: Engineering for Extreme Environments (pp. 782–792). American Society of Civil Engineers, Reston, VA.
Ehlmann, B. L., Mustard, J. F., Fassett, C. I., Schon, S. C., Head III, J. W., Des Marais, D. J., Grant, J. A., and Murchie, S. L. (2008). Clay minerals in delta deposits and organic preservation potential on Mars. Nature Geoscience, 1(6), 355–358.
Estabragh, A., Bordbar, A., and Javadi, A. (2011). Mechanical behavior of a clay soil reinforced with nylon fibers. Geotechnical and Geological Engineering, 29(5), 899–908.
Fiske, M., Edmunson, J. E., Weite, E., Fikes, J. C., Johnston, M., Mueller, R. P., and Khoshnevis, B. (2018). The disruptive technology that is additive construction: System development lessons learned for terrestrial and planetary applications. 5127.
Gao, L., Hu, G., Xu, N., Fu, J., Xiang, C., and Yang, C. (2015). Experimental study on unconfined compressive strength of basalt fiber reinforced clay soil. Advances in Materials Science and Engineering, 2015.
Grugel, R. N. (2012). Integrity of sulfur concrete subjected to simulated lunar temperature cycles. Advances in Space Research, 50(9), 1294–1299.
Grugel, R. N., and Toutanji, H. (2008). Sulfur “concrete” for lunar applications–Sublimation concerns. Advances in Space Research, 41(1), 103–112.
Hejazi, S. M., Sheikhzadeh, M., Abtahi, S. M., and Zadhoush, A. (2012). A simple review of soil reinforcement by using natural and synthetic fibers. Construction and Building Materials, 30, 100–116.
Hnaihen, K. H. (2020). The appearance of bricks in ancient mesopotamia. Athens Journal of History, 6(1), 73–96.
Isachenkov, M., Chugunov, S., Akhatov, I., and Shishkovsky, I. (2021). Regolith-based additive manufacturing for sustainable development of lunar infrastructure–An overview. Acta Astronautica.
Jaumann, R., Hiesinger, H., Anand, M., Crawford, I., Wagner, R., Sohl, F., Jolliff, B., Scholten, F., Knapmeyer, M., and Hoffmann, H. (2012). Geology, geochemistry, and geophysics of the Moon: Status of current understanding. Planetary and Space Science, 74(1), 15–41.
Joshi, R., Achari, G., Horsfield, D., and Nagaraj, T. (1994). Effect of heat treatment on strength of clays. Journal of Geotechnical Engineering, 120(6), 1080–1088.
Karl, D., Duminy, T., Lima, P., Kamutzki, F., Gili, A., Zocca, A., Günster, J., and Gurlo, A. (2020). Clay in situ resource utilization with Mars global simulant slurries for additive manufacturing and traditional shaping of unfired green bodies. Acta Astronautica, 174, 241–253.
Kazemian, A., Yuan, X., Cochran, E., and Khoshnevis, B. (2017). Cementitious materials for construction-scale 3D printing: Laboratory testing of fresh printing mixture. Construction and Building Materials, 145, 639–647.
Khitab, A., Anwar, W., Mehmood, I., Kazmi, S. M. S., and Munir, M. J. (2016). Lunar concrete: Prospects and challenges. Astronomy Reports, 60(2), 306–312.
Khoshnevis, B., Yuan, X., Zahiri, B., Zhang, J., and Xia, B. (2016). Construction by contour crafting using sulfur concrete with planetary applications. Rapid Prototyping Journal, 22(5), 848–856.
Kumar, A., Walia, B. S., and Mohan, J. (2006). Compressive strength of fiber reinforced highly compressible clay. Construction and Building Materials, 20(10), 1063–1068.
Li, H., Zhao, W., Wu, X., Tang, H., Li, Q., Tan, J., and Wang, G. (2020). 3D Printing and Solvent Dissolution Recycling of Polylactide–Lunar Regolith Composites by Material Extrusion Approach. Polymers, 12(8), 1724.
Montes, C., Broussard, K., Gongre, M., Simicevic, N., Mejia, J., Tham, J., Allouche, E., and Davis, G. (2015). Evaluation of lunar regolith geopolymer binder as a radioactive shielding material for space exploration applications. Advances in Space Research, 56(6), 1212–1221.
Mueller, R., Fikes, J. C., Case, M. P., Khoshnevis, B., Fiske, M. R., Edmunson, J., Kelso, R., Romo, R., and Andersen, C. (2017). Additive construction with mobile emplacement (ACME). 25–29.
Mueller, R. P., Howe, S., Kochmann, D., Ali, H., Andersen, C., Burgoyne, H., Chambers, W., Clinton, R., De Kestellier, X., and Ebelt, K. (2016). Automated additive construction (AAC) for Earth and space using in-situ resources. Proceedings of the fifteenth biennial ASCE aerospace division international conference on engineering, science, construction, and operations in challenging environments (earth & space 2016).
Mueller, R., Townsend, I., Tamasy, G., Evers, C., Sibille, L., Edmunson, J., Fiske, M., Fikes, J., and Case, M. (2018). Additive construction with mobile emplacement (ACME)/automated construction of expeditionary structures (ACES) materials delivery system (MDS). In Earth and Space 2018: Engineering for Extreme Environments (pp. 193–206). American Society of Civil Engineers Reston, VA.
Oh, K., Chen, T., Kou, R., Yi, H., and Qiao, Y. (2020). Ultralow-binder-content thermoplastic composites based on lunar soil simulant. Advances in Space Research, 66(9), 2245–2250.
Rahul, A., Santhanam, M., Meena, H., and Ghani, Z. (2019). 3D printable concrete: Mixture design and test methods. Cement and Concrete Composites, 97, 13–23.
Reches, Y. (2019). Concrete on Mars: Options, challenges, and solutions for binder-based construction on the Red Planet. Cement and Concrete Composites, 104, 103349.
Roman, M. C., Kim, T., Prater, T. J., and Mueller, R. P. (2017). NASA centennial challenge: 3D-Printed Habitat. 5279.
Sanders, G., and Duke, M. (2005). In-Situ resource utilization (ISRU) capability roadmap. NASA/JSC, 19.
Sokołowska, J. J., Woyciechowski, P., and Kalinowski, M. (2021). Rheological Properties of Lunar Mortars. Applied Sciences, 11(15), 6961.
Tang, C.-S., Cui, Y.-J., Tang, A.-M., and Shi, B. (2010). Experiment evidence on the temperature dependence of desiccation cracking behavior of clayey soils. Engineering Geology, 114(3–4), 261–266.
Taylor, L., Schmitt, H., Carrier, W., and Nakagawa, M. (2005). The lunar dust problem: From liability to asset. 1st Space Explor. Conf., AIAA.
Toutanji, H. A., Evans, S., and Grugel, R. N. (2012). Performance of lunar sulfur concrete in lunar environments. Construction and Building Materials, 29, 444–448.
Valente, M., Sibai, A., and Sambucci, M. (2019). Extrusion-based additive manufacturing of concrete products: Revolutionizing and remodeling the construction industry. Journal of Composites Science, 3(3), 88.
Wangler, T., Lloret, E., Reiter, L., Hack, N., Gramazio, F., Kohler, M., Bernhard, M., Dillenburger, B., Buchli, J., Roussel, N., and Flatt, R. (2016). Digital Concrete: Opportunities and Challenges. RILEM Technical Letters, 1, 67–75.
Werkheiser, M. J., Fiske, M., Edmunson, J., and Khoshnevis, B. (2015). On the development of additive construction technologies for application to development of lunar/martian surface structures using in-situ materials. 4451.
Williams, D. R. (2004). Mars fact sheet. Http://Nssdc.Gsfc.Nasa.Gov/Planetary/Factsheet/Marsfact.Html.
Xiao, G., Ye, Z., Xu, G., Zeng, J., and Zhang, L. (2021). Temperature Effect on Crack Evolution of Red Clay in Guilin. Water, 13(21), 3025.
Information & Authors
Information
Published In
Earth and Space 2022
Pages: 817 - 831
History
Published online: Jan 5, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.