Chapter 10
Bridge Scour Evaluation
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Abed, L. M. (1991). “Local scour around bridge piers in pressure flow.” PhD dissertation, Colorado State University, Fort Collins, Colo.
Abed, L. M. Richardson, E. V., and Richardson, J. R. (1991). “Bridges and structures.” Transportation Research Record 1290, Vol. 2, Third Bridge Engineering Conference, Transportation Research Board, Washington, D.C.
Ahmad, M. (1953). “Experiments on design and behavior of spur dikes.” Proceedings IAHR, ASCE Joint Meeting, University of Minnesote.
American Association of State Highway and Transportation Officials (AASHTO) (1992). Hydraulic analysis for the location and design of bridges, Vol. VII, Highway Drainage Guidelines, American Association of State Highway and Transportation Officials, Washington, D.C.
Arneson, L. A. (1997). “The effects of pressure flow on local scour in bridge openings,” PhD dissertation, Colorado State Univ., Fort Collins, Colo.
Arneson, L.A., and Abt, S.R. (1998). “Vertical contraction scour at bridges with water flowing under pressure conditions.” Stream Stability and Scour at Highway Bridges, Compendium of Stream Stability and Scour Papers, Richardson E.V. and Lagasse P.F., eds., ASCE, Reston, Va., 189–204.
Ayres Associates, (1994). “Development of hydraulic computer models to analyze tidal and coastal stream hydraulic conditions at highway structures.” Final Report, Phase I, South Carolina Department of Transportation, Columbia, S.C.
Ayres Associates. (2003). “SAMwin-Hydraulic Design Package for Channels.” Users Guide to Windows Based Program, Ayres Associates, Ft. Collins, Co.
Box, G. E. P., and Tidwell, P. W. (1961). “Transformation of the independent variables.” Technometrics, 4(4), 531–550.
Briaud, J. L., Ting, F. C., Chen, H. C., Gudavalli, R., Perugu, S., and Wei, G. (1999). “SRICOS: Prediction of scour rate in cohesive soils at bridge piers.” ASCE Journal of Geotechnical and Geoenvironmental Engineering, 125(4), 237–246.
Brigham Young University (1997). “SMS surface water modeling system.” Reference manual; version 5.0, Engineering Computer Graphics Laboratory, (1980). Provo, Utah.
Brown, S. A. (1985). “Stream bank stabilization measures for highway engineers.” FHWA/RD-84.100, Federal Highway Administration, Washington, D.C.
Brown, S. A., McQuivey, R. S., and Keefer, T. N. (1980). “Stream channel degradation and aggradation: Analysis of impacts to highway crossings.” Rep. FHWA/RD-80/159, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C., 202.
Bruun, P. (1990). “Chapter 9. Tidal inlets on salluvial shores.” Port engineering, 4th Ed., Vol. 2, Gulf Publishing, Houston, Tex.
Burkau, R. L. (1993). “UNET—One dimensional unsteady flow through a full network of open channels.” Report CPD-66. U.S. Army Corps of Engineers, Hydrologic Engineering Center, Davis, Calif.
Butler, H. L., and Lillycrop. J. (1993). “Indian River inlet: Is there a solution?” Hydraulic Engineering, Proc. of the 1993 National Conference, Vol. 2, ASCE, New York, 1218–1224.
Chang, F., Davis, S.R., and Veeramanchaneni, R. (1994). “Tidal flow through contracted bridge openings.” Miscellaneous Report, Names Bridge Section, Maryland Department of Transportation, Baltimore, Md.
Chang, F. F. M. (1973). A statistical summary of the cause and cost of bridge failures, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C.
Einstein, H. A. (1950). “The bed load function for sediment transportation in open channel flows.” Tech. Bull. 1026, U.S. Department of Agriculture Washington, D.C.
Froehlich, D. C, (1988). “Analysis of onsite measurements of scour at piers.” Hydraulic Engineering, Proc. of the 1988 Nat Conf. ASCE, Reston, Va., 534–539.
Froehlich, D. C. (1989). “Local scour at bridge abutments.” Proc., Nat. Hydr. Conf., ASCE, New York, 13–18.
Froehlich, D. C. (1995). “Contracted Scour at Bridges: Clear-water conditions with Armoring.” Hydraulic Engineering, ASCE, Reston, Va., 1995.
Froehlich, D. C., “Finite element surface-water modeling system: Two-dimensional flow in a horizontal plane.” FESWMS-2DH, Version 2, User’s Manual, Federal Highway Administration, Turner-Fairbank Highway Research Center, McLean, Va.
Greble, D. F. (1999)., “Clear water abutment scour at the I-70 bridge near Rocheport, Missouri.” Master’s study, Department of Civil and Environmental Engineering, University of Missouri at Kansas City.
Jackson, L. E., Thompson, P. D., Richardson, E. R. (1991). “Hatchie River and Schoharie Creek bridge failures.” Hydraulic Engineering Proc., 1991 National Conf. Nashville, TN, ASCE, New York.
Jain, S. C., and Fisher, E. E. (1979). “Scour around circular bridge piers at high Froude numbers.” Rep. FHWA-RD-79-104, NTIS, Springfield, Va.
Johnson, P.A., Torrico, E. F. (1994). “Scour around wide piers in shallow water.” Transportation Research Board Record 1471, Washington, D.C.
Jones, J. S. (1983). “Comparison of prediction equations for bridge pier and abutment scour.” Transportation Research Record 950, TRB, National Research Council, Washington, D.C., 202–209.
Jones, J. S. (1989). “Laboratory studies of the effects of footings and pile groups on bridge pier scour.” U.S. Interagency Sedimentation Committee Bridge Scour Symposium, Turner-Fairbank Highway Research Center, Federal Highway Administration, U.S. Department of Transportation, Mclean, Va.
Jones, J. S., Bertoldi, D. A., and Umbrell, E. R. (1995). “Preliminary studies of pressure flow scour.” Hydraulic Engineering, ASCE., V1, 916–921.
Jones, J. S., Bertoldi, D. A., and Umbrell, E. R. (1996). “Interim procedures for pressure flow scour.” North American Water and Environment Congress, (CD-ROM), ASCE, Reston, Va.
Jones, J. S., and Sheppard, D. M. (2000). “Local scour at complex pier geometries.” Proc., Joint Conference on Water Resources Engineering and Water Resources Planning and Management, ASCE, Reston, Va.
Keefer, T. N., McQuivey, R. S., and Simons, D. B. (1980). “Stream channel degradation and aggradation: Causes and consequences to highways.” FHWA Rep. FHWA/RD-80/038, Federal Highway Administration. Washington, D.C.
Lagasse, P. F., Byars, M. S., Zevenbergen, L. W., and Clopper, P. (2001a). “Bridge scour and stream instability countermeasures,” HEC 23. Publ. No. FHWA NHI 01-003, Federal Highway Administration, Washington, D.C.
Lagasse, P. F., Schall, J. D., Johnson, F., Richardson, E. V., and Chang, F. (2001b). “Stream stability at highway structure,” 3rd Ed., HEC 20. Publ. No. FHWA NHI 01-002., Federal Highway Administration, Washington D.C.
Landers, M. N., and Mueller, D. S. (1998). “Channel scour at bridges in the United States.” FHWA Rep. FHWA-RA-95-184, Federal Highway Administration, Washington D.C.
Landers, M. N., Mueller, D. S., and Marten, G. R. (1996). Bridge-scour data management system user’s manual.” U. S. Geological Survey Open File Report 95-754, Reston, Va.
Laursen, E. M. (1958). “Scour at bridge crossings.” Bulletin No. 8, Iowa Highway Research Board, Ames, Iowa.
Laursen, E. M. (1962). “Scour at bridge crossings.” ASCE, Transaction, 127, 166–179.
Laursen, E. M. “An analysis of relief bridge scour.” Journal of the Hydraulics Division, ASCE, 92, HY3, 93–118.
Laursen, E. M. (1980). “Predicting scour at bridge piers and abutments,” General Report No. 3, Arizona Department of Transportation, Phoenix, Ariz.
Laursen, E. M. (1998). “Discussion of B. W. Melville, 1997 paper ‘Pier and abutment scour: Integrated approach.” Journal of the Hydraulics Division, ASCE, 124 (HY7), 769–771.
Laursen, E. M., and Toch, A. (1956). “Scour around bridge piers and abutments.” Bulletin No. 4, Iowa Highway Research Board, Ames, Iowa.
Lee, J. K., and Froehlich D. C. (1989). “Two dimensional finite element modeling of bridge crossings.” Report FHWA-RD-88-149. Federal Highway Administration, Washington. D.C.
Lim, S. Y. (1993). “Clear water scour in long contractions.” Proceedings, Institution of Civil Engineers, Maritime and Energy, 101, 93–98.
Lim, S. Y. (1997). “Equilibrium clear-water scour around an abutment.” Journal of the Hydraulics Divisions, ASCE, 123 (3). 237–243.
Liu, M. K., Chang, F. M., and Skinner, M. M. (1961). “Effect of bridge construction on scour and backwater.” Dept. of Civil Engineering, Colorado State University. Rep. CER60-HKL22, Ft. Collins, Colo.
McIntosh, J. L. (1989) “Use of scour prediction formulae.” FHWA Report FHWA-RD-90-035, Federal Highway Administration, Washington, D.C.
Melville, B. W. (1984). “Live-bed acour at bridge piers.” ASCE Journal. of Hydraulic Engineering, Hydraulic Division, Vol. 110, No. 9, 1234–1247.
Melville, B. W. (1992). “Local scour at bridge abutments.” Journal. of Hydraulic Engineering, Hydraulic Division, ASCE, 118(4), 615–631.
Melville, B. W., (1997). “Pier and abutment scour: Integrated approach,” Journal of the Hydraulic Division, ASCE, 123(2), 125–136.
Melville, B. W., and Dongol, D. M. (1992). “Bridge pier scour with debris accumulation.” Journal of the Hydraulic Division, ASCE, 118(9), 1306–1310.
Melville, B. W., and Sutherland, A. J. (1988). “Design method for local scour at bridge piers.” Journal of the Hydraulic Division, ASCE, 114(10), 1210–1226.
Molinas, A. (1993). “Bri-stars model for alluvial river simulation.” Hydraulic Engineering, ASCE, 2, 1726–1731.
Mueller, D. S. (1996). “Local scour at bridge piers in nonuniform sediment under dynamic conditions.” Ph.D, dissertation, Colorado State University, Ft. Collins, Colo.
Mueller, D. S., and Jones, J. S. (1999). “Evaluation of recent field and laboratory research on scour at bridges in coarse bed materials.” Stream Stability and Scour at Highway Bridges, Compendium of Stream Stability and Scour Papers, Richardson E.V. and Lagasse P.F., eds., ASCE, Reston, Va., 298–310.
Neill, C. R., ed. (1973). Guide to bridge hydraulics, Roads and Transportation Association of Canada, University of Toronto Press, Toronto.
Raudkivi, A. J. (1986). “Functional trends of scour at bridge piers.” Journal of the Hydraulic Division, ASCE, 112(1), 1–13.
Rhodes, J., and Trent, R. (1993). “Economics of floods, scour, and bridge failures.” Hydraulic Engineering, ASCE, 1 (1974), 928–933.
Richardson, E. V., and Abed, L. (1993). “The top width of pier scour holes in free and pressure flow.” Hydraulic Engineering, ASCE, V1, 911–915.
Richardson, E. V., and Davis, S. R. (1995). “Evaluating scour at bridges,” 3rd ed., HEC 18, Publ. FHWA-IP-90-017, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C.
Richardson, E. V., and Lagasse, P. F., eds. (1999). Stream stability and scour at highway bridges, compendium of papers, ASCE Water Resources Engineering Conferences, 1991 to 1998, ASCE, Reston, Va.
Richardson, E. V., Lagasse, P. F., Schall, J.D., Ruff, J. F., Brisbane, T. E., and Frick, D. M. (1987). “Hydraulic, erosion and channel stability analysis of the Schoharie Creek Bridge failure, New York,” Resources Consultants, Inc. and Colorado State University, Fort Collins, Colo.
Richardson, E. V., and Richardson, J. R. (1998). Discussion of B. W. Melville, 1997 paper ‘Pier and Abutment Scour: Integrated Approach,’ Journal of the Hydraulics Division, ASCE, 124 (HY7) 771–772.
Richardson, E. V., Richardson, J. R., and Edge, B. E. (1993). “Scour at highway structures in tidal waters.” Hydraulic Engineering, ASCE, 2, 1206 –1212.
Richardson, E. V., and Simons, D. B. (1974). “Spurs and guide banks.” Open File Report, Colorado State University Engineering Research Center, Fort Collins, Colo.
Richardson, E. V., and Simons, D. B. (1984). “Use of spurs and guidebanks for highway crossings.” Proc. Second Bridge Eng. Conf., Tran. Research Board Report 950, Washington, D.C.
Richardson, E. V., Simons, D. B., and Julien, P. (1990). “Highways in the river environment.” FHWA-HI-90-016, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C. Revision of Richardson, E. V., D. B. Simons, S. Karaki, K. Mahmood and M. A Stevens, 1975 “Highways in the river environment.” Hydraulic and environmental design considerations training and design manual.
Richardson, E. V., Simons, D. B., and Lagasse, P. F. (2001). “River engineering for highway encroachments—Highways in the river environment.” Hydraulic Design Series 6 (HDS 6) Publ, No FHWA NHI 01-004, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C.
Richardson, E. V., Stevens, M. A., and Simons, D. B. (1975). “The design of spurs for river IAHR, training.” Proc., XVIth IAHR Congress, Sao Paulo, Brazil.
Richardson, J. R., and Richardson, E. V. (1992). “Discussion of B. W. Melville, 1992 paper ‘Local Scour at Bridge Abutments.’” Journal of the Hydraulics Division, ASCE, 119 (HY9), 1069– 1071.
Richardson, J. R., and Richardson, E. V. (1993). “The fallacy of local abutment scour equations.” Hydraulic Engineering, ASCE, 1, 749–755.
Richardson, J. R., Richardson, E. V., and Edge, L. (1995). “Bridge scour in the coastal region.” Proc. of the Fourth International Bridge Engineering Conference, TRB, National Research Council, Washington, D.C.
Richardson, J. R. and Trivino, R. (1999) “Estimating clear water abutment scour,” Report, Department of Civil and Environmental Engineering, University of Missouri–Kansas City.
Salim, M., and Jones, J. S. (1995). “Effects of exposed pile foundations on local pier scour.” Water Resources Engineering Proc. of the 1995 Nat. Water Resources Conf., ASCE, Reston, Va. v2, 1814–1818.
Salim, M., and Jones, J. S. (1996). “Scour around esposed pile foundations.” ASCE Compendium, Stream Stability and Scour at Highway Bridges, Richardson and Lagasse p. b., ASCE, eds., Reston, Va., 349–364.
Schumm, S. A. (1977). The fluvial system, Wiley, New York.
Shearman, J. O. (1987). “Bridge waterways analysis model for mainframe and microcomputers.” WSPRO/HY-7, Federal Highway Administration, U.S. Department of Transportation, Washington, D.C.
Sheppard, D. M. (1993). “Bridge scour in tidal waters.” Transportation Research Record 1420, Washington, D.C., 1–6.
Sheppard, D. M. (2001). “A methodology for predicting local scour depths near bridges piers with complex geometries.” unpublished design procedure, University of Florida, Gainesville, Fla.
Smith, W. L. (1999) “Local structure-induced sediment scour at pile groups.” M.S. thesis University of Florida, Gainesville, Fla.
Sturm, T. W. (1998). “Abutment scour in compound channels.” Stream Stability and Scour at Highway Bridges, Compendium of Stream Stability and Scour Papers, Richardson E.V. and Lagasse P.F., eds., ASCE, Reston, Va.
Sturm, T. W. (1999). “Abutment scour studies for compound channels.” FHWA Report FHWA-RD-99-156, Federal Highway Administration,U.S. Department. of Transportation, McLean, Va.
Sturm, T. W., and Janjua, N. S. (1994) “Clear-water scour around abutments in floodplains.” Journal of Hydraulic Engineering, 120(8), 956–972.
U.S. Army Corps of Engineers (USACE). (1981). “The Streambank Erosion Control Evaluation and Demonstration Act of 1974.” Final Report to Congress, Executive Summary and Conclusions, Washington, D.C.
U.S. Army Corps of Engineers (USACE). (1983). “Streambank protection guidelines for landowners and local governments.” Keown M. P., Waterways Experiment Station, Vicksburg, Miss. p. 1983.
U.S. Army Corps of Engineers (USACE). (1983). “HEC-6 scour and deposition in rivers and reservoirs, computer program.” User’s Manual. Hydrologic Engineering Center, Davis, Calif.
U.S. Army Corps of Engineers (USACE). (1996). “UNET— One-dimensional unsteady flow through a full network of open channels,” User’s Manual, CPD-66, Version 3.1, Hydrologic Engineering Center, Davis, Calif.
U.S. Army Corps of Engineers (USACE). (1997). “User’s guide to RMA2 WES Version 4.3,” Donnell Barbara, ed., Waterways Experiment Station, Vicksburg, Miss.
U.S. Army Corps of Engineers (USACE). (2001). “HEC-RAS river analysis,” Hydrologic Engineering Center, Davis, Calif.
Van de Kreeke, J. (1967). “Water-level fluctuations and flow in tidal inlets.” Journal of the Hydraulics Division, ASCE, 93 (HY4), 97–106.
Vanoni, V. A., ed. (1975). “Sedimentation engineering.” ASCE Manual 54, New York.
Vincent, M. S., Ross, M. A., and Ross, B. E. (1993). “Tidal inlet bridge scour assessment model.” Transport Research Record 1420, Washington, D.C., 7–13.
Zevenbergen, L. W., Hunt, J. H., Byars, M. S., Edge, B. L., Richardson, E. V., and Lagasse, P. F. (1997a). “Tidal hydraulic modeling for bridges; Users manual.” Pooled Fund Study SPR-3(22), Ayres Associates, Ft. Collins, Colo.
Zevenbergen, L. W., Richardson, E. V., Edge, B. L., Lagasse, J. S., and Fisher, J. S. (1997b). “Development of hydraulic computer models to analyze tidal and coastal stream hydraulic conditions at highway structures.” Final Report, Phase II. South Carolina Department of Transportation, Columbia, S.C.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 505 - 542
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.