Behavior of Concrete Beams Strengthened in Shear with Carbon-Fiber Sheets
Publication: Journal of Composites for Construction
Volume 8, Issue 3
Abstract
This paper presents the results of a test program for shear strengthening characteristics of continuous unidirectional flexible carbon-fiber polymer sheets bonded to reinforced concrete (RC) beams. A total of eight concrete beams were tested. Various sheet configurations and layouts were studied to determine their effects on ultimate shear strength of the beams. From the tests, it was found that the externally adhesive bonded flexible carbon-fiber sheets are effective in strengthening RC beams in shear. Further, it was observed that the strength increases with the number of sheet layers and the depth of sheets across the beam section. Among the various schemes of wrapping studied, vertical U-wrap of sheet provided the most effective strengthening for concrete beam. Beam strengthened using this scheme showed 119% increase in shear capacity as compared to the control beam without any strengthening. Two prediction models available in literature for computing the shear contribution of carbon-fiber tow sheets to the shear capacity of fiber reinforced polymers bonded beams were compared with the experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
References
Al-Sulaimani, G. J., Sharif, A., Basunbul, I. A., Baluch, M. H., and Ghaleb, B. N.(1994). “Shear repair for reinforced concrete by fiberglass plate bonding.” ACI Struct. J., 91(3), 458–464.
American Concrete Institute (ACI) Committee 440. (1996). “State-of-the-art report on fiber-reinforced plastics (FRP) reinforcement for concrete structures.” ACI 440R-96, Farmington Hills, Mich.
Chaallal, O., Nollet, M. J., and Perraton, D.(1998). “Shear strengthening of RC beams by externally bonded side CFRP strips.” J. Compos. Constr., 2(2), 111–113.
Chajes, M. J., Januska, T. F., Mertz, D. R., Thomson, T. A., Jr., and Finch, W. W., Jr.(1995). “Shear strengthening of reinforced concrete beams using externally applied composite fabrics.” ACI Struct. J., 92(3), 295–303.
International Federation for Structural Concrete (fib) (2001). “Externally bonded FRP reinforcement for RC structures.” Tech. Rep. Bull., 14, 59–66.
Japan Society of Civil Engineers. (2001). “Recommendations for upgrading of concrete structures with use of continuous fiber sheet.” Concr. Eng. Ser., 41, 35–45.
Khalifa, A., Gold, W. J., Nanni, A., and Abdel Aziz, M. I.(1998). “Contribution of externally bonded FRP to shear capacity of RC flexural members.” J. Compos. Constr., 2(4), 195–202.
Meier, U.(1995). “Strengthening of structures using carbon fiber/epoxy composites.” Constr. Build. Mater., 9(6), 341–351.
Miyauchi, K., Inoue, S., Nishibayashi, S., and Tanaka, Y.(1997). “Shear behavior of reinforced concrete beam strengthened with CFRP sheet.” Trans. Jpn. Concr. Inst., 19, 97–104.
Norris, T., Saadatmanesh, H., and Ehsani, M. R.(1997). “Shear and flexural strengthening of R/C beams with carbon fiber sheets.” J. Struct. Eng., 123(7), 903–911.
Sato, Y., Tanaka, T., Ueda, T., and Ono, S.(1996). “Shear behavior of RC beams reinforced with carbon fiber sheets.” Trans. Jpn. Concr. Inst., 18, 137–142.
Triantafillou, T. C., and Antonopoulos, C. P.(2000). “Design of concrete flexural members strengthened in shear with FRP.” J. Compos. Constr., 4(4), 198–205.
Uji, K.(1992). “Improving shear capacity of existing reinforced concrete members by applying carbon fiber sheets.” Trans. Jpn. Concr. Inst., 14, 253–266.
Information & Authors
Information
Published In
Copyright
Copyright © 2004 American Society of Civil Engineers.
History
Received: Oct 4, 2001
Accepted: Jun 3, 2003
Published online: May 14, 2004
Published in print: Jun 2004
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.