Journal of Composites for Construction

A new retrofitting technique based on a material compatible with concrete is currently under development at Cardiff University. It overcomes some of the problems associated with the current techniques based on externally bonded steel plates and FRP (fiber-reinforced polymer) laminates which are due to the mismatch of their tensile strength and stiffness with that of the concrete structure being retrofitted. This paper will describe briefly the technology necessary for preparing high-performance fiber-reinforced concrete mixes (HPFRCC), designated CARDIFRC. They are characterized by high tensile/flexural strength and high energy-absorption capacity (i.e., ductility). The special characteristics of CARDIFRC make them particularly suitable for repair, remedial, and upgrading activities (i.e., retrofitting) of existing concrete structures. The promising results of several studies using CARDIFRC for retrofitting damaged concrete flexural members will be presented. It will be shown that damaged reinforced concrete beams can be successfully strengthened and rehabilitated in a variety of different retrofit configurations using precast CARDIFRC strips adhesively bonded to the prepared surfaces of the damaged beams. To predict the moment resistance and load-deflection response of the beams retrofitted in this manner an analytical model will be introduced, and the results of the computations will be compared with the test results to evaluate the accuracy of the model.

This paper discusses the experimental result on the long-term deflection and cracking behavior of concrete beams prestressed with carbon fiber-reinforced polymer (CFRP) tendons, under sustained long-term service load, including cracked and uncracked sections. Six full-scale beams were cast and tested. The experimental parameters included the level of prestress, the level of sustained service loading, and concrete strengths. The experimental results showed that the performance of concrete beams prestressed with CFRP tendons meets the serviceability criteria in terms of deflection and cracking. The test results also showed that the long-term performance of concrete beams prestressed with CFRP tendons was comparable to those prestressed with steel tendons. Furthermore, the test results showed that with the increase of concrete strength, the serviceability performance also improved with concrete beams prestressed with CFRP tendons.

E-glass/epoxy-based jackets have been demonstrated to be an effective means of providing lateral confinement for the seismic retrofit and strengthening of concrete columns. When fabricated using appropriate procedures and covered with a protective coating these materials show good environmental durability. However, E-glass fibers are susceptible to attack and degradation by moisture and alkalis, causing concern for their use in humid and very moist climates or in applications where the jacketed columns are immersed in water. This paper describes the enhancement of durability through change in the sizing used on the fibers. Results of ring burst tests on three differently sized systems after immersion in a severe environment [water at 60°C (140°F)] are detailed, and it is shown that the use of the appropriate sizing can significantly reduce moisture-related degradation.

This paper presents results of a comprehensive experimental investigation on the behavior of axially loaded short rectangular columns that have been strengthened with carbon fiber-reinforced polymer (CFRP) wrap. Six series, a total of 90 specimens, of uniaxial compression tests were conducted on rectangular and square short columns. The behavior of the specimens in the axial and transverse directions is investigated. The parameters considered in this study are (1) the concrete strength; (2) the aspect ratio of the cross section; and (3) the number of CFRP layers. The findings of this research can be summarized as follows: The CFRP wrapping enhances the compressive strength and the ductility of both square and rectangular columns, but to a lesser degree than that of circular columns. The ultimate strength and the ductility of the CFRP confined concrete increase with increasing number of confining layers. The increase in strength and ductility is more significant for lower strength concrete, representing poor or degraded concrete, than for normal-to-high strength concrete; that is, the maximum gain in strength that can be achieved for 3 ksi concrete wrapped columns is approximately 90%, as compared to only 30% for 6 ksi concrete wrapped columns. The CFRP confining jacket must be sufficiently stiff to develop appropriate confining forces at relatively low axial strain levels. The gain in compressive strength obtained by the CFRP confined concrete depends mainly on the relative stiffness of the CFRP jacket to the axial stiffness of the column.

Most of the research on application of composite materials in civil engineering during the past decade has concentrated on the behavior of structural elements under static loads. In engineering practice, there are many situations in which structures undergo impact or dynamic loading. In particular, the impact response of concrete beams strengthened with composite materials is of interest. This paper presents the results of an experimental investigation conducted to study the impact effects on concrete beams strengthened with fiber-reinforced polymer laminates. Two types of composite laminates, carbon and Kevlar, were bonded to the top and bottom faces of concrete beams with epoxy. Five beams were tested: two strengthened with Kevlar laminates, two strengthened with carbon laminates, and one unretrofitted beam as the control specimen. The impact load was applied by dropping a steel cylinder from a specified height onto the top face of the beam. The test results revealed that composite laminates significantly increased the capacity of the concrete beams to resist impact load. In addition, the laminates reduced the deflection and crack width. Comparing the test results of the beams strengthened with Kevlar and carbon laminates indicated that the gain in strength depends on the type, thickness, weight, and material properties of the composite laminate.

The use of fiber-reinforced polymer (FRP) composites for strengthening and/or rehabilitation of concrete structures is gaining increasing popularity in the civil engineering community. One of the most attractive applications of FRP materials is their use as confining devices for concrete columns, which may result in remarkable increases of strength and ductility as indicated by numerous published experimental results. Despite a large research effort, a proper analytical tool to predict the behavior of FRP-confined concrete has not yet been established. Most of the available models are empirical in nature and have been calibrated against their own sets of experimental data. On the other hand, the experimental results available in the literature encompass a wide range of values of the significant variables. The objective of this work is a systematic assessment of the performance of the existing models on confinement of concrete columns with FRP materials. The study is conducted in the following steps: the experimental data on confinement of concrete cylinders with FRP available in the technical literature are classified according to the values of the significant variables; the existing empirical and analytical models are reviewed, pointing out their distinct features; the whole set of available experimental results is compared with the whole set of analytical models; and strengths and weaknesses of the various models are analyzed. Finally, a new equation is proposed to evaluate the axial strain at peak stress of FRP-confined concrete cylinders.

The lack of a comprehensive, validated, and easily accessible data base for the durability of fiber-reinforced polymer (FRP) composites as related to civil infrastructure applications has been identified as a critical barrier to widespread acceptance of these materials by structural designers and civil engineers. This concern is emphasized since the structures of interest are primarily load bearing and are expected to remain in service over extended periods of time without significant inspection or maintenance. This paper presents a synopsis of a gap analysis study undertaken under the aegis of the Civil Engineering Research Foundation and the Federal Highway Administration to identify and prioritize critical gaps in durability data. The study focuses on the use of FRP in internal reinforcement, external strengthening, seismic retrofit, bridge decks, structural profiles, and panels. Environments of interest are moisture/solution, alkalinity, creep/relaxation, fatigue, fire, thermal effects (including freeze-thaw), and ultraviolet exposure.

Fiber reinforced polymer (FRP) materials are currently produced in different configurations and are widely used for the strengthening and retrofitting of concrete structures and bridges. Recently, considerable research has been directed to characterize the use of FRP bars and strips as near surface mounted reinforcement, primarily for strengthening applications. Nevertheless, in-depth understanding of the bond mechanism is still a challenging issue. This paper presents both experimental and analytical investigations undertaken to evaluate bond characteristics of near surface mounted carbon FRP (CFRP) strips. A total of nine concrete beams, strengthened with near surface mounted CFRP strips were constructed and tested under monotonic static loading. Different embedment lengths were used to evaluate the development length needed for effective use of near surface mounted CFRP strips. A closed-form analytical solution is proposed to predict the interfacial shear stresses. The model is validated by comparing the predicted values with test results as well as nonlinear finite element modeling. A quantitative criterion governing the debonding failure of near surface mounted CFRP strips is established. The influence of various parameters including internal steel reinforcement ratio, concrete compressive strength, and groove width is discussed.

This paper presents the results of a two-phase experimental program investigating the punching shear behavior of fiber reinforced polymer reinforced concrete (FRP RC) flat slabs with and without carbon fiber reinforced polymer (CFRP) shear reinforcement. In the first phase, problems of bond slip and crack localization were identified. Decreasing the flexural bar spacing in the second phase successfully eliminated those problems and resulted in punching shear failure of the slabs. However, CFRP shear reinforcement was found to be inefficient in enhancing significantly the slab capacity due to its brittleness. A model, which accurately predicts the punching shear capacity of FRP RC slabs without shear reinforcement, is proposed and verified. For slabs with FRP shear reinforcement, it is proposed that the concrete shear resistance is reduced, but a strain limit of 0.0045 is recommended as maximum strain for the reinforcement. Comparisons of the slab capacities with ACI 318-95, ACI 440-98, and BS 8110 punching shear code equations, modified to incorporate FRP reinforcement, show either overestimated or conservative results.

The demand for the development of efficient and durable bridge decks is a priority for most of the highway authorities worldwide. This paper summarizes the results of an experimental program designed to study the behavior of an innovative glass fiber reinforced polymer (GFRP) bridge deck recently patented in Canada. The deck consisted of a number of triangular filament wound tubes bonded with epoxy resin. GFRP plates were adhered to the top and bottom of the tubes to create one modular unit. The experimental program, described in this paper, discusses the evolution of two generations of the bridge deck. In the first generation, three prototype specimens were tested to failure, and their performance was analyzed. Based on the behavior observed, a second generation of bridge decks was fabricated and tested. The performance was evaluated based on load capacity, mode of failure, deflection at service load level, and strain behavior. All decks tested exceeded the requirements to support HS30 design truck loads specified by AASHTO with a margin of safety. This paper also presents an analytical model, based on Classical Laminate Theory to predict the load-deflection behavior of the FRP decks up to service load level. In all cases the model predicted the deck behavior very well.