Comparative Study of Models on Confinement of Concrete Cylinders with Fiber-Reinforced Polymer Composites
Publication: Journal of Composites for Construction
Volume 7, Issue 3
Abstract
The use of fiber-reinforced polymer (FRP) composites for strengthening and/or rehabilitation of concrete structures is gaining increasing popularity in the civil engineering community. One of the most attractive applications of FRP materials is their use as confining devices for concrete columns, which may result in remarkable increases of strength and ductility as indicated by numerous published experimental results. Despite a large research effort, a proper analytical tool to predict the behavior of FRP-confined concrete has not yet been established. Most of the available models are empirical in nature and have been calibrated against their own sets of experimental data. On the other hand, the experimental results available in the literature encompass a wide range of values of the significant variables. The objective of this work is a systematic assessment of the performance of the existing models on confinement of concrete columns with FRP materials. The study is conducted in the following steps: the experimental data on confinement of concrete cylinders with FRP available in the technical literature are classified according to the values of the significant variables; the existing empirical and analytical models are reviewed, pointing out their distinct features; the whole set of available experimental results is compared with the whole set of analytical models; and strengths and weaknesses of the various models are analyzed. Finally, a new equation is proposed to evaluate the axial strain at peak stress of FRP-confined concrete cylinders.
Get full access to this article
View all available purchase options and get full access to this article.
References
Ahmad, S. M., Khaloo, A. R., and Irshaid, A.(1991). “Behavior of concrete spirally confined by fiberglass filaments.” Mag. Concrete Res., 43(156), 143–148.
Ahmad, S. M., and Shah, S. P.(1982). “Stress-strain curves of concrete confined by spiral reinforcement.” J. Am. Concr. Inst., 79(6), 484–490.
Bažant, Z. P., and Tsubaki, T.(1980). “Total strain theory and path-dependence of concrete.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 106(6), 1151–1173.
Considère, A. (1906). Experimental researches on reinforced concrete, L. S. Moisseiff, translator, McGraw, New York.
Cusson, D., and Paultre, P.(1995). “Stress-strain model for confined high-strength concrete.” J. Struct. Eng., 121(3), 468–477.
De Lorenzis, L., Micelli, F., and La Tegola, A. (2002). “Influence of specimen size and resin type on the behavior of FRP-confined concrete cylinders.” Proc., ACIC-2002, Southampton, 2002.
De Lorenzis, L., and Tepfers, R. (2001). “A comparative study of models on confinement of concrete cylinders with FRP composites.” Publication No. 01:04, Dept. of Building Materials, Chalmers Univ. of Technology, Gothenburg, Sweden.
Elwi, A. A., and Murray, D. W.(1979). “A 3D hypoelastic concrete constitutive relationship.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 105(4), 623–641.
Fam, A. Z., and Rizkalla, S. H. (2000). “Concrete-filled FRP tubes for flexural and axial compression members.” Proc., ACMBS-3, Ottawa, Canada, 315–322.
Fam, A. Z., and Rizkalla, S. H.(2001). “Behavior of axially loaded concrete-filled circular fiber-reinforced polymer tubes.” ACI Struct. J., 98(3), 280–289.
Fardis, M. N., and Khalili, H.(1981). “Concrete encased in fiberglass-reinforced-plastic.” J. Am. Concr. Inst. Proc., 78(6), 440–446.
Fardis, M. N., and Khalili, H.(1982). “FRP-encased concrete as a structural material.” Mag. Concrete Res., 34(121), 191–202.
Harmon, T. G., and Slattery, K. T. (1992). “Advanced composite confinement of concrete.” 1st Int. Conf. on Advanced Composite Materials in Bridges and Structures, Sherbrooke, Qué, Canada, 299–306.
Imran, I., and Pantazopoulou, S. J.(1996). “Experimental study of plain concrete under triaxial stress.” ACI Mater. J., 93(6), 589–601.
Kono, S., Inazumi, M., and Kaku, T. (1998). “Evaluation of confining effects of CFRP sheets on reinforced concrete members.” Proc., ICCI’98, Tucson, Ariz., 343–355.
Kurt, C. E.(1978). “Concrete filled structural plastic columns.” J. Struct. Div., ASCE, 104(1), 55–63.
Lan, S., and Guo, Z.(1997). “Experimental investigation of multiaxial compressive strength of concrete under different stress paths.” ACI Mater. J., 94(5), 427–434.
La Tegola, A., and Manni, O. (1999). “Experimental investigation on concrete confined by fiber reinforced polymer and comparison with theoretical model.” Proc., FRPRCS-4, Baltimore.
Mander, J. B., Priestley, M. J. N., and Park, R.(1988). “Theoretical stress-strain model for confined concrete.” J. Struct. Eng., 114(8), 1804–1826.
Matthys, S. (2001). “Structural behavior and design of concrete members strengthened with externally bonded FRP reinforcement.” Doctoral thesis, Dept. of Structural Engineering, Univ. of Ghent, Belgium.
Matthys, S., Taerwe, L., and Audenaert, K. (1999). “Tests on axially loaded concrete columns confined by fiber reinforced polymer sheet wrapping.” Proc., FRPRCS-4, Baltimore, 217–228.
Micelli, F., Myers, J. J., and Murthy, S. (2001). “Effect of environmental cycles on concrete cylinders confined with FRP.” Proc., CCC2001 Int. Conf. on Composites in Construction, Porto, Portugal.
Mirmiran, A., and Shahawy, M.(1996). “A new concrete-filled hollow FRP composite column.” Composites, Part B, 27B(3-4), 263–268.
Mirmiran, A., and Shahawy, M.(1997). “Behavior of concrete columns confined by fiber composites.” J. Struct. Eng., 123(5), 583–590.
Miyauchi, K., Nishibayashi, S., and Inoue, S. (1997). “Estimation of strengthening effects with carbon fiber sheet for concrete column.” Proc., FRPRCS-3, Sapporo, Japan, Vol. 1, 217–224.
Nanni, A., and Bradford, N. M.(1995). “FRP jacketed concrete under uniaxial compression.” Constr. Build. Mater., 9(2), 115–124.
Newman, K., and Newman, J. B. (1972). “Failure theories and design criteria for plain concrete.” Proc., Int. Engineering Materials Conf. on Structure, Solid Mechanics and Engineering Design, Southampton, 1969, Wiley Interscience, New York, Part 2, 963–995.
Pantazopoulou, S. J., and Mills, R. H.(1995). “Microstructural aspects of the mechanical response of plain concrete.” ACI Mater. J., 92(6), 605–616.
Picher, F., Rochette, P., and Labossiére, P. (1996). “Confinement of concrete cylinders with CFRP.” Proc., ICCI’96, Tucson, Ariz., 829–841.
Popovics, S.(1973). “A numerical approach to the complete stress-strain curves for concrete.” Cem. Concr. Res., 3(5), 583–599.
Richard, R. M., and Abbott, B. J.(1975). “Versatile elastic-plastic stress-strain formula.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 101(4), 511–515.
Richart, F. E., Brandtzaeg, A., and Brown, R. L. (1928). “A study of the failure of concrete under combined compressive stresses.” Engineering Experiment Station Bulletin No. 185, Univ. of Illinois, Urbana, Ill.
Rochette, P., and Labossiére, P.(2000). “Axial testing of rectangular column models confined with composites.” J. Compos. Constr., 4(3), 129–136.
Rousakis, T. (2001). “Experimental investigation of concrete cylinders confined by carbon FRP sheets, under monotonic and cyclic axial compressive load.” Research Rep., Chalmers Univ. of Technology, Göteborg, Sweden.
Saadatmanesh, H., Ehsani, M. R., and Li, M. W.(1994). “Strength and ductility of concrete columns externally reinforced with fiber composite straps.” ACI Struct. J., 91(4), 434–447.
Saafi, M., Toutanji, H. A., and Li, Z.(1999). “Behavior of concrete columns confined with fiber reinforced polymer tubes.” ACI Mater. J., 96(4), 500–509.
Samaan, M., Mirmiram, A., and Shahawy, M.(1998). “Model of concrete confined by fiber composites.” J. Struct. Eng., 124(9), 1025–1031.
Shahawy, M., Mirmiran, A., and Beitelmann, T.(2000). “Tests and mod-eling of carbon-wrapped concrete columns.” Composites, Part B, 31(6-7), 471–480.
Spoelstra, M. R., and Monti, G.(1999). “FRP-confined concrete model.” J. Compos. Constr., 3(3), 143–150.
Tepfers, R. (2001). “Compatibility related problems for FRP and FRP reinforced concrete.” Int. Workshop Composites in Construction: A Reality, Capri, Italy.
Thériault, M., Claude, S., and Neale, K. W. (2001). “Effect of size and slenderness ratio on the behaviour of FRP-wrapped columns.” Proc., FRPRCS-5, Vol. 2, Cambridge, U.K., 765–772.
Toutanji, H.(1999). “Stress-strain characteristics of concrete columns externally confined with advanced fiber composite sheets.” ACI Mater. J., 96(3), 397–404.
Watanabe, K., Nakamura, H., Honda, Y., Toyoshima, M., Iso, M., Fujimaki, T., Kaneto, M., and Shirai, N. (1997). “Confinement effect of FRP sheet on strength and ductility of concrete cylinders under uniaxial compression.” Proc., FRPRCS-3, Sapporo, Japan, Vol. 1, 233–240.
Xiao, Y., and Wu, H.(2000). “Compressive behavior of concrete confined by carbon fiber composite jackets.” J. Mater. Civ. Eng., 12(2), 139–146.
Yang, X., Nanni, A., and Chen, G. (2001). “Effect of corner radius on the performance of externally bonded FRP reinforcement.” Proc., FRPRCS-5, Cambridge, U.K.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Aug 9, 2001
Accepted: Mar 19, 2002
Published online: Jul 15, 2003
Published in print: Aug 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.