Cyclic Behavior of Four-Limbed Circular CFST Latticed Beam-Columns
Publication: Journal of Structural Engineering
Volume 150, Issue 3
Abstract
Experimental tests to investigate the behavior of four-limbed circular concrete-filled steel tube (CFST) latticed beam-columns under constant axial compression and cyclic lateral force were carried out. Attention was paid to the effect of diameter-to-thickness ratio of limb tube (51.5 and 24.9), axial compression level (from 0.05 to 0.5) and type of limb [circular CFST and steel circular hollow section (CHS)] on the overall behavior, failure modes and force versus deformation relationship of the specimens. Additionally, the cyclic deterioration of stiffness, ductility and accumulated energy dissipation of the specimens were assessed for seismic design. According to this experimental study, it is found that, due to the interaction between limb tube and its concrete core, the seismic resistance of composite specimens is better than that of steel counterparts. Moreover, the seismic resistance of composite specimens generally reduces with the increase of and . A finite element (FE) model is further established to replicate the behavior of the specimens, and the simulated cyclic behavior of four-limbed circular CFST latticed beam-columns subjected to constant axial compression and cyclic lateral force agree well with experimental results. Parametric study on the lateral force versus displacement hysteretic curve of four-limbed circular CFST latticed beam-columns was performed using the verified FE model. Finally, an accurate restoring force model (RFM) to predict the lateral force versus displacement relationship of four-limbed circular CFST latticed beam-columns is developed, and the predictions are in good agreement with the numerical and experimental results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models or code that supports the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The studies in this paper are financially supported by the National Natural Science Foundation of China (Projects 51678105). The financial support is gratefully acknowledged.
References
ABAQUS. 2014. ABAQUS standard user’s manual, version 6.14. Providence, RI: Dassault Systèmes Corporation.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete and commentary. ACI 318-19. Farmington Hills, MI: ACI.
ANSI. 2016. Specification for structural steel buildings. ANSI/AISC 360-16. Chicago: ANSI.
ATC (Applied Technology Council). 1992. Guidelines for cyclic seismic testing of components of steel structures. ATC-24. Redwood City, CA: ATC.
Birtel, V., and P. Mark. 2006. “Parameterised finite element modelling of RC beam shear failure.” In Proc., 19th Annual Int. ABAQUS Users’ Conf., 95–108. Providence, RI: ABAQUS.
CEN (European Committee for Standardization). 2004. Eurocode 4: Design of composite steel and concrete structures-Part 1-1: General rules and rules for buildings. EN 1994-1-1. Brussels, Belgium: CEN.
Chen, B., Y. Zou, C. Tang, X. Yang, and M. He. 2014. “Contrast research on square and circular CFST laced columns pseudo-static test.” Supplement, Chin. Civ. Eng. J. 47 (S2): 108–112. https://doi.org/10.15951/j.tmgcxb.2014.s2.017.
Chinese Standard. 2010. Technical specification for concrete-filled steel tubular structures. DBJ/T13-51. Fujian, China: Housing and Urban Construction Department of Fujian Province.
Chinese Standard. 2014. Technical code for concrete filled steel tubular structures. GB 50936. Beijing: China Architecture & Building Press.
Chinese Standard. 2015. Specification for seismic test of buildings. JGJ/T 101. Beijing: China Architecture & Building Press.
Chinese Standard. 2017. Standard for design of steel structures. GB 50017. Beijing: China Architecture & Building Press.
Deng, X. 2012. “Study on the seismic performance of concrete filled steel tubular lattice column.” Master’s dissertation, School of Civil Engineering, Central South Univ.
Fukumoto, T., and K. Morita. 2023. “Restoring force characteristic model for bending moment–rotation angle relationship of concrete-filled square steel tube beam-columns.” Jpn. Archit. Rev. 6 (1): e12351. https://doi.org/10.1002/2475-8876.12351.
Goto, Y., G. P. Kumar, and N. Kawanishi. 2010. “Nonlinear finite-element analysis for hysteretic behavior of thin-walled circular steel columns with in-filled concrete.” J. Struct. Eng. 136 (11): 1413–1422. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000240.
Han, L. H., W. Li, and R. Bjorhovde. 2014. “Developments and advanced applications of concrete-filled steel tubular (CFST) structures: Members.” J. Constr. Steel Res. 100 (Sep): 211–228. https://doi.org/10.1016/j.jcsr.2014.04.016.
Han, L. H., F. Y. Liao, Z. Tao, and Z. Hong. 2009. “Performance of concrete filled steel tube reinforced concrete columns subjected to cyclic bending.” J. Constr. Steel Res. 65 (8–9): 1607–1616. https://doi.org/10.1016/j.jcsr.2009.03.013.
Han, L. H., Y. F. Yang, H. Yang, and W. Li. 2020. “Life-cycle based analytical theory of concrete-filled steel tubular structures and its applications.” Chin. Sci. Bull. 65 (28–29): 3173–3184. https://doi.org/10.1360/TB-2020-0618.
Han, L. H., G. H. Yao, and Z. Tao. 2007. “Performance of concrete-filled thin-walled steel tubes under pure torsion.” Thin-Walled Struct. 45 (1): 24–36. https://doi.org/10.1016/j.tws.2007.01.008.
Huang, Y. 2015. “Seismic behavior of concrete filled steel tubular built-up columns.” Ph.D. dissertation, Dept. of Civil, Environmental and Mechanical Engineering, Univ. of Trento.
Huang, Z., L. Z. Jiang, Y. F. Chen, Y. Lu, and W. B. Zhou. 2018. “Experimental study on the seismic performance of concrete filled steel tubular laced columns.” Steel Compos. Struct. 26 (6): 719–731. https://doi.org/10.12989/scs.2018.26.6.719.
Ji, X., H. Kang, X. Chen, and J. Qian. 2014. “Seismic behavior and strength capacity of steel tube-reinforced concrete composite columns.” Earthquake Eng. Struct. Dyn. 43 (4): 487–505. https://doi.org/10.1002/eqe.2354.
Jia, L. J., and H. Kuwamura. 2014. “Prediction of cyclic behaviors of mild steel at large plastic strain using coupon test results.” J. Struct. Eng. 140 (2): 04013056. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000848.
Kawano, A., C. Matsui, and Y. Sakino. 1996. “An experimental study on the elasto-plastic behavior and deformability of concrete-filled tubular truss beam-columns under cyclic loading.” J. Struct. Constr. Eng. 61 (482): 141–150. https://doi.org/10.3130/aijs.61.141_2.
Kawano, A., and K. Sakino. 2003. “Seismic resistance of CFT trusses.” Eng. Struct. 25 (5): 607–619. https://doi.org/10.1016/S0141-0296(02)00170-0.
Lai, Z., A. H. Varma, and L. G. Griffis. 2016. “Analysis and design of noncompact and slender CFT beam-columns.” J. Struct. Eng. 142 (1): 04015097. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001349.
Lin, S., Y. G. Zhao, Z. H. Lu, and X. F. Yan. 2021. “Unified theoretical model for axially loaded concrete-filled steel tube stub columns with different cross-sectional shapes.” J. Struct. Eng. 147 (10): 04021159. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003150.
Liu, M., F. Wu, E. Abi, L. Wu, and G. Su. 2022. “Strength degradation characteristics of the steel-concrete interface under cyclic shear.” Tehnički Vjesnik 29 (4): 1372–1381. https://doi.org/10.17559/TV-20210705101118.
Luo, Y. 2013. “Studies on the seismic performance of four-tube concrete filled steel tubular laced columns.” Master’s dissertation, School of Civil Engineering, Central South Univ.
Ma, D. Y., L. H. Han, W. Li, and X. L. Zhao. 2018. “Seismic performance of concrete-encased CFST piers: Analysis.” J. Bridge Eng. 23 (1): 04017119. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001157.
Matsui, C., and A. Kawano. 1988. “Strength and behavior of concrete-filled tubular truss.” In Proc., Int. Specialty Conf. on Concrete Filled Steel Tubular Structures, 113–119. Harbin, China: China Science and Technology Exchange Center.
Shi, Y., M. Wang, and Y. Wang. 2011. “Experimental and constitutive model study of structural steel under cyclic loading.” J. Constr. Steel Res. 67 (8): 1185–1197. https://doi.org/10.1016/j.jcsr.2011.02.011.
Varma, A. H., J. M. Ricles, R. Sause, and L. W. Lu. 2004. “Seismic behavior and design of high-strength square concrete-filled steel tube beam columns.” J. Struct. Eng. 130 (2): 169–179. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:2(169).
Yang, Y. F., C. Hou, and M. Liu. 2018a. “Experimental study and numerical analysis of CFSST columns subjected to lateral cyclic loading.” J. Struct. Eng. 144 (12): 04018219. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002225.
Yang, Y. F., M. Liu, and X. M. Bie. 2022. “A research on the bearing capacity of four-legged CFST latticed members under axial compression.” Prog. Steel Build. Struct. 24 (5): 18–26. https://doi.org/10.13969/j.cnki.cn31-1893.2022.05.003.
Yang, Y. F., M. Liu, and F. Fu. 2018b. “Experimental and numerical investigation on the performance of three-legged CFST latticed columns under lateral cyclic loadings.” Thin-Walled Struct. 132 (Nov): 176–194. https://doi.org/10.1016/j.tws.2018.08.016.
Yang, Y. F., M. Liu, C. Hou, and X. M. Bie. 2019. “Behaviour of four-legged square CFST latticed members under lateral cyclic loading.” J. Constr. Steel Res. 156 (May): 54–74. https://doi.org/10.1016/j.jcsr.2019.01.018.
Yuan, H., Q. Wu, Y. Huang, and Z. She. 2020. “Experimental and theoretical studies on the seismic performance of CFST battened built-up column piers.” Eng. Struct. 206 (Mar): 110099. https://doi.org/10.1016/j.engstruct.2019.110099.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Aug 4, 2023
Accepted: Nov 1, 2023
Published online: Jan 8, 2024
Published in print: Mar 1, 2024
Discussion open until: Jun 8, 2024
ASCE Technical Topics:
- Beam columns
- Columns
- Composite materials
- Concrete
- Continuum mechanics
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Finite element method
- Forces (type)
- Lateral forces
- Materials engineering
- Methodology (by type)
- Numerical methods
- Solid mechanics
- Steel columns
- Structural behavior
- Structural engineering
- Structural members
- Structural systems
- Tubes (structure)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.