Seismic Resilience Enhancement of Irregular Space Structure Using Friction-Damped Self-Centering Tension Braces
Publication: Journal of Structural Engineering
Volume 150, Issue 3
Abstract
A variety of self-centering devices and structural systems have been proposed and investigated in recent years to eliminate or reduce postearthquake repair, but so far their applications are still very limited. This paper reports the seismic resilience enhancement of an irregular space structure by using friction-damped self-centering tension braces (FSTBs). First, the configuration, performance, and numerical model of FSTBs are introduced, and then a seismic design procedure for enhancing the seismic capacity of a torsional irregular structure is proposed. Taking the terminal building at the Harare Airport, a lifeline project in Zimbabwe, for example, unidirectional and three-dimensional nonlinear dynamic analyses were conducted on the building designed with and without FSTBs. The result shows that FSTBs can significantly reduce both story drifts and residual story drifts of the bottom reinforced concrete frame and displacements of the steel roof. To this end, the field assembly of FSTBs is briefly reported. The presented study provides references to the use of self-centering devices in seismic resilience upgrades of important engineering projects.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
The numerical results are available from the corresponding author upon reasonable request.
Acknowledgments
This work was supported by the Natural Science Foundation of China (No. 52125802) and the Scientific Research Foundation of the Graduate School of Southeast University (No. YBPY2125).
References
Araki, Y., N. Maekawa, K. C. Shrestha, M. Yamakawa, Y. Koetaka, T. Omori, and R. Kainuma. 2014. “Feasibility of tension braces using Cu–Al–Mn superelastic alloy bars.” Struct. Control Health Monit. 21 (10): 1304–1315. https://doi.org/10.1002/stc.1644.
Blebo, F. C., and D. A. Roke. 2015. “Seismic-resistant self-centering rocking core system.” Eng. Struct. 101 (Mar): 193–204. https://doi.org/10.1016/j.engstruct.2015.07.016.
Chen, P., L. Xu, and X. Xie. 2023. “Enhanced design and experimental investigation of disc spring-based self-centering buckling-restrained braces with a compounded combination mode.” Earthquake Eng. Struct. Dyn. 52 (10): 3053–3073. https://doi.org/10.1002/eqe.3912.
Chi, P., T. Guo, Y. Peng, D. Cao, and J. Dong. 2018. “Development of a self-centering tension-only brace for seismic protection of frame structures.” Steel Compos. Struct. 26 (5): 573–582. https://doi.org/10.12989/scs.2018.26.5.573.
Chou, C., and P. Chung. 2014. “Development of cross-anchored dual-core self-centering braces for seismic resistance.” J. Constr. Steel Res. 101 (Oct): 19–32. https://doi.org/10.1016/j.jcsr.2014.04.035.
Chou, C., W. Tsai, and P. Chung. 2016. “Development and validation tests of a dual-core self-centering sandwiched buckling-restrained brace (SC-SBRB) for seismic resistance.” Eng. Struct. 121 (Aug): 30–41. https://doi.org/10.1016/j.engstruct.2016.04.015.
Dezfuli, M. A., K. M. Dolatshahi, M. Mofid, and S. S. Eshkevari. 2017. “Coreless self-centering braces as retrofitting devices in steel structures.” J. Constr. Steel Res. 133 (Jun): 485–498. https://doi.org/10.1016/j.jcsr.2017.02.017.
Eatherton, M. R., and A. Maurya. 2020. “Experimental investigation of a self-centering beam moment frame.” Eng. J. Am. Inst. Steel Constr. 57 (4): 221–241.
Elettore, E., F. Freddi, M. Latour, and G. Rizzano. 2021. “Design and analysis of a seismic resilient steel moment resisting frame equipped with damage-free self-centering column bases.” J. Constr. Steel Res. 179 (Apr): 106543. https://doi.org/10.1016/j.jcsr.2021.106543.
Fang, C., W. Wang, Y. Chen, J. Ricles, R. Sause, X. Yang, and Q. Zhong. 2018. “Application of an Innovative SMA Ring spring system for self-centering steel frames subject to seismic conditions.” J. Struct. Eng. 144 (8): 04018114. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002127.
Guo, T., Z. Cao, Z. Xu, and S. Lu. 2016. “Cyclic load tests on self-centering concrete pier with external dissipators and enhanced durability.” J. Struct. Eng. 142 (1): 04015088. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001357.
Guo, T., J. Wang, Y. Song, W. Xuan, and Y. Chen. 2020. “Self-centering cable brace with friction devices for enhancing seismic performance of RC frame structures.” Eng. Struct. 207 (Mar): 110187. https://doi.org/10.1016/j.engstruct.2020.110187.
Guo, T., J. Xu, W. Xu, and Z. Di. 2014. “Seismic upgrade of existing buildings with fluid viscous dampers: Design methodologies and case study.” J. Perform. Constr. Facil. 29 (6): 04014175. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000671.
Guo, T., Z. Xu, L. Song, L. Wang, and Z. Zhang. 2017. “Seismic resilience upgrade of RC frame building using self-centering concrete walls with distributed friction devices.” J. Struct. Eng. 143 (12): 04017160. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001901.
Huang, L., Z. Zhou, P. M. Clayton, B. Zeng, and J. Qiu. 2020. “Experimental investigation of friction-damped self-centering prestressed concrete beam-column connections with hidden corbels.” J. Struct. Eng. 146 (3): 04019228. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002536.
Jiang, H., L. Xu, X. Xie, and P. Chen. 2023. “Seismic behavior of double activation self-centering brace and braced structures.” J. Struct. Eng. 149 (7): 04023082. https://doi.org/10.1061/JSENDH.STENG-11819.
Kitayama, S., and M. C. Constantinou. 2016a. “Design and analysis of buildings with fluidic self-centering systems.” J. Struct. Eng. 142 (11): 04016105. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001583.
Kitayama, S., and M. C. Constantinou. 2016b. “Seismic response analysis of single-degree-of-freedom yielding structures with fluidic self-centering systems.” Eng. Struct. 125 (Oct): 266–279. https://doi.org/10.1016/j.engstruct.2016.06.057.
Li, X., F. Zhang, K. Tian, Z. Wang, L. Jiang, and J. Dong. 2021. “Shaking table test for externally-hung self-centering rocking wall structure.” Bull. Earthquake Eng. 19 (Jan): 863–887. https://doi.org/10.1007/s10518-020-01010-y.
Lu, X., Q. Jiang, Z. Miao, and P. Pan. 2015. Elasto-plastic analysis of buildings against earthquake. [In Chinese.] Beijing: China Construction Industry Press.
McCormick, J., H. Aburano, M. Ikenaga, and M. Nakashima. 2008. “Permissible residual deformation levels for building structures considering both safety and human elements.” In Proc., 14th World Conf. on Earthquake Engineering. Beijing: Institute of Engineering Mechanics, China Earthquake Administration.
MHURD-PRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010a. Code for design of concrete structures. [In Chinese.] GB 50010-2010. Beijing: MHURD-PRC.
MHURD-PRC (Ministry of Housing and Urban-Rural Development of the People’s Republic of China). 2010b. Code for seismic design of buildings. [In Chinese.] GB 50011-2010. Beijing: MHURD-PRC.
Mousavi, S. A., and S. M. Zahrai. 2017. “Slack free connections to improve seismic behavior of tension-only braces: An experimental and analytical study.” Eng. Struct. 136 (Apr): 54–67. https://doi.org/10.1016/j.engstruct.2017.01.009.
Naeem, A., and J. Kim. 2017. “Seismic performance evaluation of a spring viscous damper cable system.” Eng. Struct. 176 (Dec): 455–467. https://doi.org/10.1016/j.engstruct.2018.09.055.
Qiu, C., and S. Zhu. 2017. “Performance-based seismic design of self-centering steel frames with SMA-based braces.” Eng. Struct. 130 (Jan): 67–82. https://doi.org/10.1016/j.engstruct.2016.09.051.
Shi, F., Z. Lin, Q. Li, O. E. Ozbulut, Z. He, and Y. Zhou. 2023. “Design, manufacturing, and testing of a hybrid self-centering brace for seismic resilience of buildings.” Earthquake Eng. Struct. Dyn. 52 (5): 1381–1402. https://doi.org/10.1002/eqe.3821.
Shi, F., Y. Zhou, O. E. Ozbulut, and F. Ren. 2022. “Hysteretic response and failure behavior of an SMA cable-based self-centering brace.” Struct. Control Health Monit. 29 (1): e2847. https://doi.org/10.1002/stc.2847.
Song, Y., T. Guo, J. Wang, W. Xuan, and Y. Chen. 2020. “Seismic fragility evaluation of SCCB-enhanced RC frame structures.” J. Perform. Constr. Facil. 34 (4): 04020051. https://doi.org/10.1061/(ASCE)CF.1943-5509.0001450.
Wang, H., X. Nie, and P. Pan. 2017. “Development of a self-centering buckling restrained brace using cross-anchored pre-stressed steel strands.” J. Constr. Steel Res. 138 (Nov): 621–632. https://doi.org/10.1016/j.jcsr.2017.07.017.
Wang, J., T. Guo, L. Song, and Y. Song. 2022. “Performance-based seismic design of RC moment resisting frames with friction-damped self-centering tension braces.” J. Earthquake Eng. 26 (4): 1723–1742. https://doi.org/10.1080/13632469.2020.1785357.
Xu, G., T. Guo, and A. Li. 2023. “Self-centering rotational joints for seismic resilient steel moment resisting frame.” J. Struct. Eng. 149 (2): 04022245. https://doi.org/10.1061/JSENDH.STENG-11475.
Xu, L., X. Fan, and Z. Li. 2017. “Experimental behavior and analysis of self-centering steel brace with pre-pressed disc springs.” J. Constr. Steel Res. 139 (Dec): 363–373. https://doi.org/10.1016/j.jcsr.2017.09.021.
Xu, L., X. Xie, and Z. Li. 2018. “Development and experimental study of a self-centering variable damping energy dissipation brace.” Eng. Struct. 160 (Apr): 270–280. https://doi.org/10.1016/j.engstruct.2018.01.051.
Zhang, G., L. Xu, and Z. Li. 2023. “Development and experimental verification of self-centering haunched plug-in modular connections.” J. Struct. Eng. 149 (5): 04023047. https://doi.org/10.1061/JSENDH.STENG-12029.
Zhu, R., T. Guo, and M. Frank. 2020. “Development and test of a self-centering fluidic viscous damper.” Adv. Struct. Eng. 23 (13): 2835–2849. https://doi.org/10.1177/1369433220920464.
Zhu, R., T. Guo, T. Solomon, and Y. Xu. 2022. “Shake table tests and numerical analysis of steel frames with self-centering viscous-hysteretic devices under the mainshock-aftershock sequences.” J. Struct. Eng. 148 (4): 04022024. https://doi.org/10.1061/(ASCE)ST.1943-541X.0003318.
Information & Authors
Information
Published In
Copyright
© 2024 American Society of Civil Engineers.
History
Received: Jul 23, 2023
Accepted: Oct 17, 2023
Published online: Jan 8, 2024
Published in print: Mar 1, 2024
Discussion open until: Jun 8, 2024
ASCE Technical Topics:
- Aerospace engineering
- Bracing
- Building design
- Construction engineering
- Construction methods
- Design (by type)
- Earthquake engineering
- Engineering fundamentals
- Geotechnical engineering
- Infrastructure
- Infrastructure resilience
- Seismic design
- Seismic effects
- Seismic tests
- Space colonies
- Space structures
- Structural engineering
- Structural members
- Structural systems
- Tension members
- Tests (by type)
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.