Degraded Gerber Saddles in RC Bridges
Publication: Journal of Performance of Constructed Facilities
Volume 37, Issue 2
Abstract
Sudden failure of reinforced concrete (RC) or prestressed concrete (PC) Gerber saddles of bridges and viaducts has occurred all around in the word in the last few years due to corrosion of steel bars. The danger of sudden and brittle failure is often due to general and pitting corrosion of steel bars, concrete crushing, and loss of bond in steel bars. In this paper, the flexural response of reinforced concrete Gerber supports under their self-weight with or without service loads was investigated through determination of the load-deflection response of beams, with the focus on the consequences of pitting corrosion and loss of bond in steel bars. A simplified strut-and-tie model was developed to predict the flexural response of Gerber supports in terms of load-deflection curves, deduced analytically in a closed form. The model includes the effects of corrosion of steel bars, loss of bond, and concrete crushing due to the biaxial state of stresses. Several experimental laboratory studies regarding the flexural behavior of RC beams with Gerber supports were collected to validate the proposed model. In addition, numerical analyses were performed through a nonlinear finite-element code for comparison with the experimental and analytical results.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
No data, models, or code were generated or used during the study.
References
AASHTO. 2014. LRFD bridge design specifications. 7th ed. Washington, DC: AASHTO.
Ahmad, S., A. Elahi, J. Hafeez, M. Fawad, and Z. Ahsan. 2013. “Evaluation of the shear strength of dapped ended beam.” Life. Sci. J. 10 (3): 1038–1044.
Aswin, M., B. Mohammed, M. Liew, and Z. Syed. 2015. “Shear failure of RC dapped-end beams.” Adv. Mater. Sci. Eng. 2015: 309135. https://doi.org/10.1155/2015/309135.
Campione, G. 2009. “Flexural response of FRC corbels.” Cem. Concr. Compos. 31 (3): 204–210. https://doi.org/10.1016/j.cemconcomp.2009.01.006.
Campione, G., F. Cannella, and L. Cavaleri. 2017. “Shear and flexural strength prediction of corroded RC beams.” Constr. Build. Mater. 149 (Sep): 395–405. https://doi.org/10.1016/j.conbuildmat.2017.05.125.
CEN (European Committee for Standardization). 2004. Design of concrete structures—Part 1–1: General rules and rules for buildings. Eurocode 2, EN 1992-1-1. Brussels, Belgium: CEN.
Clarck, L. 2010. IAN53 Half-joint assessment advice ULS assessment of half-joints. London: Highways Agency.
Coronelli, D., and P. Gambarova. 2004. “Structural assessment of corroded reinforced concrete beams: Modeling guidelines.” J. Struct. Eng. 130 (8): 1214–1224. https://doi.org/10.1061/(ASCE)0733-9445(2004)130:8(1214).
Desnerck, P., J. M. Lees, and C. T. Morley. 2015. “Bond behaviour of reinforcing bars in cracked concrete.” Constr. Build. Mater. 94 (Sep): 126–136. https://doi.org/10.1016/j.conbuildmat.2015.06.043.
Di Pisco, M., M. Colombo, P. Martinelli, and D. Coronelli. 2020. “The tecnical causes of the collapse of Annone overpass on SS. 36.” In Proc., Giornate AICAP Napoli. Rome: AICAP.
Harnisch, J., and M. Raupach. 2015. “The residual cross section factor as a key parameter for the static evaluation of corroding reinforced concrete structures.” Mater. Corros. 66 (9): 829–838. https://doi.org/10.1002/maco.201408066.
Highways Agency. 1995. BA 51/95, the assessment of concrete structures affected by steel corrosion. London: Highways Agency.
Jeon, C. H., J. B. Lee, S. Lon, and C. S. Shim. 2019. “Equivalent material model of corroded prestressing steel strand.” J. Mater. Res. Technol. 8 (2): 2450–2460. https://doi.org/10.1016/j.jmrt.2019.02.010.
Jirawattansomkul, T., N. Kongwang, and S. L. Wanchai. 2021. “Failure analysis of dapped-end cracking in posttensioned bridge girder.” J. Bridge Eng. 26 (11): 04021082. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001786.
Lin, H., Y. Zhao, J. Q. Yanf, J. Feng, and H. Y. Ozbolt. 2019. “Effects of the corrosion of main bar and stirrups on the bond behavior of reinforcing steel bar.” Constr. Build. Mater. 225 (Nov): 13–28. https://doi.org/10.1016/j.conbuildmat.2019.07.156.
Lu, W.-Y., T.-C. Chen, and I.-J. Lin. 2015. “Shear strength of reinforced concrete dapped-end beams with shear span-to-depth ratios larger than unity.” J. Mar. Sci. Technol. 23 (4): 5. https://doi.org/10.6119/JMST-015-0511-1.
Ministero delle Infrastrutture e dei Trasporti. 2018. Nuove norme tecniche per le costruzioni. Rome: Ministero delle Infrastrutture e dei Trasporti.
Mitchell, D., and M. Collins. 2013. Revision of strut-and-tie provisions in the AASHTO LRFD bridge design specifications. Quebec: MDC Research.
Rodriguez, J., L. Ortega, and A. Garcia. 1994. “Corrosion of reinforcing bars and service life of R/C structure: Corrosion and bond deterioration.” In Proc., Int. Conf. on Concrete Across Borders, 315–326. Brussels, Belgium: Union of International Associations.
Shakir, Q. M. 2018. “Reinforced concrete dapped end beams—State of the art.” Int. J. Appl. Sci. 1 (2): p44. https://doi.org/10.30560/ijas.v1n2p44.
Val, D., M. Stewart, and R. Melchers. 1998. “Effect of reinforcement corrosion on reliability of highway bridges.” Eng. Struct. 20 (11): 1010–1019. https://doi.org/10.1016/S0141-0296(97)00197-1.
Vecchi, F., L. Franceschini, F. Tondolo, B. Belletti, J. S. Montero, and P. Minetola. 2021. “Corrosion morphology of prestressing steel strands in naturally corroded PC beams.” Constr. Build. Mater. 296 (Aug): 123720. https://doi.org/10.1016/j.conbuildmat.2021.123720.
Vecchio, F. J., and P. S. Wong. 2002. Vector2 & formworks user’s manual. Toronto: Univ. of Toronto.
Wang, L., X. Zhang, J. Zhang, J. Yi, and Y. Liu. 2017. “Simplified model for corrosion-induced bond degradation between steel strand and concrete.” J. Mater. Civ. Eng. 29 (4): 04016257. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001784.
Zhou, L., Z. Liu, and Z. He. 2018. “Elastic-to-plastic strut-and-tie model for deep beams.” J. Bridge Eng. 23 (4): 04018007. https://doi.org/10.1061/(ASCE)BE.1943-5592.0001206.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Nov 8, 2021
Accepted: Sep 30, 2022
Published online: Dec 27, 2022
Published in print: Apr 1, 2023
Discussion open until: May 27, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.