Hydrothermal Performance of In-Tunnel Ground Freezing Subjected to Drilling Inaccuracy and Seepage Flow
Publication: ASCE-ASME Journal of Risk and Uncertainty in Engineering Systems, Part A: Civil Engineering
Volume 8, Issue 1
Abstract
In the last few decades, artificial ground freezing (AGF) has been used as a temporary soil stabilization and waterproofing technique in geotechnical engineering, especially in tunneling construction. In construction, drilling inaccuracy of freeze pipes occurs, slowing the formation of a connected frozen wall and in turn undermining the process of AGF. This study used a hydrothermal coupling finite-element model to investigate the heat transfer and formation of a frozen wall during the progress of AGF. The simulation results indicate that the drilling inaccuracy causes temperature fluctuation at the temperature monitoring point and prolongs the formation time of the frozen wall. The maximum drilling inaccuracy allowed in practice is recommended to be 0.2 m based on the model (established using the shield tunneling of Nanjing Subway Line 10). The low-temperature zone develops unevenly and finally forms a complete frozen wall with an elliptical ring in the presence of the seepage flow. Thus, the location of the temperature monitoring points needs to be reconsidered, rather than being distributed evenly around the perimeter of the tunnel in practical engineering, and more monitoring points should be placed to monitor the formation of the frozen wall.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research is supported by the NRF-NSFC 3rd Joint Research Grant (Earth Science) (Grant No. 41861144022) and the National Natural Science Foundation of China (Grant No. 52079099).
References
Alzoubi, M. A., A. Madiseh, F. P. Hassani, and A. P. Sasmito. 2019. “Heat transfer analysis in artificial ground freezing under high seepage: Validation and heatlines visualization.” Int. J. Therm. Sci. 139 (May): 232–245. https://doi.org/10.1016/j.ijthermalsci.2019.02.005.
Bear, J. 2012. Hydraulics of groundwater. New York: Courier Dover Publications.
Bear, J., and Y. Bachmat. 2012. Vol. 4 of Introduction to modeling of transport phenomena in porous media. New York: Springer.
Comini, G., S. Del Guidice, R. W. Lewis, and O. C. Zienkiewicz. 1974. “Finite element solution of non-linear heat conduction problems with special reference to phase change.” Int. J. Numer. Methods Eng. 8 (3): 613–624. https://doi.org/10.1002/nme.1620080314.
Grasso, P., and L. Soldo. 2017. “Risk analysis-driven design in tunnelling: The state-of-the-art, learnt from past experiences, and horizon for future development.” Innovative Infrastruct. Solutions 2 (1): 49. https://doi.org/10.1007/s41062-017-0087-2.
Hu, J., Y. Liu, H. Wei, K. Yao, and W. Wang. 2017. “Finite-element analysis of heat transfer of horizontal ground-freezing method in shield-driven tunneling.” Int. J. Geomech. 17 (10): 04017080. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000978.
Hu, R., and Q. Liu. 2016. “Simulation of heat transfer during artificial ground freezing combined with groundwater flow.” In Proc., 2016 COMSOL Conf. Washington, DC: American Geophysical Union.
Huang, S. B., Y. Guo, Y. Liu, L. Ke, G. Liu, and C. Chen. 2018. “Study on the influence of water flow on temperature around freeze pipes and its distribution optimization during artificial ground freezing.” Appl. Therm. Eng. 135 (May): 435–445. https://doi.org/10.1016/j.applthermaleng.2018.02.090.
Ingebritsen, S. E., and W. E. Sanford. 1999. Groundwater in geologic processes. Cambridge, UK: Cambridge University Press.
Kim, Y. S., J.-M. Kang, J. Lee, S.-S. Hong, and K.-J. Kim. 2012. “Finite element modeling and analysis for artificial ground freezing in egress shafts.” KSCE J. Civ. Eng. 16 (6): 925–932. https://doi.org/10.1007/s12205-012-1252-y.
Li, K.-Q., D.-Q. Li, and Y. Liu. 2020. “Meso-scale investigations on the effective thermal conductivity of multi-phase materials using the finite element method.” Int. J. Heat Mass Transfer 151 (Apr): 119383. https://doi.org/10.1016/j.ijheatmasstransfer.2020.119383.
Liu, Y., J. Hu, H. Xiao, and E. J. Chen. 2017. “Effects of material and drilling uncertainties on artificial ground freezing of cement-admixed soils.” Can. Geotech. J. 54 (12): 1659–1671. https://doi.org/10.1139/cgj-2016-0707.
Liu, Y., K. Q. Li, D. Q. Li, X. S. Tang, and S. X. Gu. 2021. “Coupled thermal-hydraulic modeling of artificial ground freezing with uncertainties in pipe inclination and themal conductivity.” Acta Geotech. 1–18. https://doi.org/10.1007/s11440-021-01221.
Liu, Y., K. Q. Li, P. T. Li, and J. Hu. 2019. “Artificial ground freezing technique in tunnel construction considering uncertain drilling inaccuracy of freeze pipes.” In Proc., 29th European Safety and Reliability Conf. Singapore: Research Publishing.
Marwan, A., M.-M. Zhou, M. Z. Abdelrehim, and G. Meschke. 2016. “Optimization of artificial ground freezing in tunneling in the presence of seepage flow.” Comput. Geotech. 75 (May): 112–125. https://doi.org/10.1016/j.compgeo.2016.01.004.
Mohseni, M., M. Payan, and R. J. Chenari. 2018. “Soil–structure interaction analysis in natural heterogeneous deposits using random field theory.” Innovative Infrastruct. Solutions 3 (1): 62. https://doi.org/10.1007/s41062-018-0168-x.
Nagel, J. B., and B. Sudret. 2015. “Hamiltonian monte carlo and borrowing strength in hierarchical inverse problems.” ASCE-ASME J. Risk Uncertainty Eng. Syst., Part A: Civ. Eng. 2 (3): B4015008. https://doi.org/10.1061/AJRUA6.0000847.
Ou, C. Y., C. C. Kao, and C. I. Chen. 2009. “Performance and analysis of artificial ground freezing in the shield tunneling.” J. GeoEngeering 4 (1): 29–40.
Papakonstantinou, S., G. Anagnostou, and E. Pimentel. 2013. “Evaluation of ground freezing data from the Naples subway.” Proc. Inst. Civ. Eng. Geotech. Eng. 166 (3): 280–298. https://doi.org/10.1680/geng.10.00099.
Pimentel, E., S. Papakonstantinou, and G. Anagnostou. 2012a. “Numerical interpretation of temperature distributions from three ground freezing applications in urban tunneling.” Tunnelling Underground Space Technol. 28 (2012): 57–69. https://doi.org/10.1016/j.tust.2011.09.005.
Pimentel, E., A. Sres, and G. Anagnostou. 2012b. “Large-scale laboratory tests on artificial ground freezing under seepage-flow conditions.” Géotechnique 62 (3): 227–241. https://doi.org/10.1680/geot.9.P.120.
Rockafellar, R. T., and J. O. Royset. 2015. “Engineering decisions under risk averseness.” ASCE-ASME J. Risk Uncertainty Eng. Syst. Part A Civ. Eng. 1 (2): 04015003. https://doi.org/10.1061/AJRUA6.0000816.
Rouabhi, A., E. Jahangir, and H. Tounsi. 2018. “Modeling heat and mass transfer during ground freezing taking into account the salinity of the saturating fluid.” Int. J. Heat Mass Transfer 120 (May): 523–533. https://doi.org/10.1016/j.ijheatmasstransfer.2017.12.065.
Sudisman, R. A., M. Osada, and T. Yamabe. 2019. “Experimental investigation on effects of water flow to freezing sand around vertically buried freeze pipe.” J. Cold Reg. Eng. 33 (3): 04019004. https://doi.org/10.1061/(ASCE)CR.1943-5495.0000187.
Vitel, M., A. Rouabhi, M. Tijani, and F. Guérin. 2015. “Modeling heat transfer between a freeze pipe and the surrounding ground during artificial ground freezing activities.” Comput. Geotech. 63 (Jan): 99–111. https://doi.org/10.1016/j.compgeo.2014.08.004.
Vitel, M., A. Rouabhi, M. Tijani, and F. Guérin. 2016. “Modeling heat and mass transfer during ground freezing subjected to high seepage velocities.” Comput. Geotech. 73 (2016): 1–15. https://doi.org/10.1016/j.compgeo.2015.11.014.
Zhou, M. M., and G. Meschke. 2013. “A three-phase thermo-hydro-mechanical finite element model for freezing soils.” Int. J. Numer. Anal. Methods Geomech. 37 (18): 3173–3193. https://doi.org/10.1002/nag.2184.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Nov 6, 2020
Accepted: Aug 26, 2021
Published online: Oct 19, 2021
Published in print: Mar 1, 2022
Discussion open until: Mar 19, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Bo Wang, Jun Hu, Xiaoqi Lin, Hui Zeng, Three-Dimensional Numerical Modeling of Artificially Freezing Ground in Metro Station Construction, Applied Sciences, 10.3390/app13010671, 13, 1, (671), (2023).