In-Plane Shear Cyclic Performance of Spline Cross-Laminated Timber-Concrete Composite Diaphragms
Publication: Journal of Structural Engineering
Volume 147, Issue 10
Abstract
Over the past decade, cross-laminated timber (CLT) panels have gained popularity worldwide. To achieve larger spans and to increase the resistance to diaphragm seismic and wind forces to be transferred through CLT floor or roof systems, CLT-concrete composite (CCC) floors have been developed as an alternative. While significant testing has been performed under gravity loading, limited experimental data exist on the in-plane performance of CCC systems. This study presents results from an experimental program designed to characterize the in-plane shear behavior of CCC diaphragm connections using different CLT to concrete screw connector orientations in a test setup that simulates the expected seismic load path in diaphragms for platform-type construction. Tested variables include concrete slab thickness, composite screw angle, and single spline connection systems consisting of nails or screws. Experimental results and observed damage progression from cyclic testing are presented and discussed. Results indicate that CCC systems achieved increased stiffness and strength values when compared to bare-CLT systems, but slab thickness did not influence the strength and stiffness of the system for the load paths simulated. Additionally, CCC floor systems with 45° composite screw connectors displayed increased strength but overall similar stiffness values when compared to the CCC systems with 90° composite screws. The results provide useful engineering parameters, such as elastic stiffness, peak load, displacement capacity, and ductility ratios that can be used in the development of codified design parameters or in performance-based designs.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This work was financially supported by the USDA Agricultural Research Service in cooperation with the Tallwood Design Institute under Grant No. 58-0204-6-002. Additional thanks to Simpson Strong-Tie, D. R. Johnson, and Boise Cascade for providing materials for constructing test specimens, as well as Woodworks, and Katerra, for providing reviews of the testing program of the connection systems tested.
References
Akbas, T., R. Sause, J. M. Ricles, R. Ganey, J. Berman, S. Loftus, J. D. Dolan, S. Pei, J. W. van de Lindt, and H. E. Blomgren. 2017. “Analytical and experimental lateral-load response of self-centering posttensioned CLT walls.” J. Struct. Eng. 143 (6): 04017019. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001733.
APA (American Plywood Association). 2010. Structural plywood. PS 1-09. Tacoma, WA: Engineered Wood Association.
APA (American Plywood Association). 2019. DRJ cross-laminated timber. APA PR-L320. Tacoma, WA: Engineered Wood Association.
ASCE. 2017. Seismic evaluation and retrofit of existing buildings. ASCE/SEI 41-17. Reston, VA: ASCE.
Ashtari, S., T. Haukaas, and F. Lam. 2014. “In-plane stiffness of cross-laminated timber floors.” In Proc., World Conf. on Timber Engineering. Red Hook, NY: Curran Associates.
ASTM. 2002. Standard test methods for cyclic (reversed) load test for shear resistance of walls for buildings. ASTM E2126-11. West Conshohocken, PA: ASTM.
ASTM. 2014. Standard specification for evaluation of structural composite lumber products. ASTM D5456-14b. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for compressive strength of cylindrical concrete specimens. ASTM C39/C39M-18. West Conshohocken, PA: ASTM.
AWC (American Wood Council). 2014. General dowel equations for calculating lateral connection values. Leesburg, VA: AWC.
AWC (American Wood Council). 2018. National design specification (NDS) for wood construction. Leesburg, VA: American Forest and Paper Association.
Barbosa, A. R., et al. 2019. Design and testing of shake-table specimen of cross-laminated timber and cross laminated timber-concrete composite diaphragms. Corvallis, OR: Oregon State Univ.
Barbosa, A. R., L. G. Rodrigues, A. Sinha, C. Higgins, R. B. Zimmerman, S. Breneman, S. Pei, J. W. van de Lindt, J. Berman, and E. McDonnell. 2021. “Shake-table experimental testing and performance of topped and untopped cross-laminated timber diaphragms.” J. Struct. Eng. 147 (4): 04021011. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002914.
Blomgren, H., S. Pei, Z. Jin, J. Powers, J. Dolan, J. van de Lindt, A. Barbosa, and D. Huang. 2019. “Full-scale shake table testing of cross-laminated timber rocking shear walls with replaceable components.” J. Struct. Eng. 145 (10): 04019115. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002388.
Boccadoro, L., and A. Frangi. 2014. “Experimental analysis of the structural behavior of timber–concrete composite slabs made of beech-laminated veneer lumber.” J. Perform. Constr. Facil. 28 (6): A4014006. https://doi.org/10.1061/(ASCE)CF.1943-5509.0000552.
Branco, J. M., M. Kekeliak, and P. B. Lourenco. 2015. “In-plane stiffness of timber floors strengthened with CLT.” Eur. J. Wood Wood Prod. 73 (3): 313–323. https://doi.org/10.1007/s00107-015-0892-2.
Breneman, S., E. McDonnell, and R. B. Zimmerman. 2016. “An approach to CLT diaphragm modeling for seismic design with application to a US high-rise project.” In Proc., World Conf. on Timber Engineering. Vienna, Austria: TU Verlag.
Ceccotti, A., and M. Follesa. 2006. “Seismic behaviour of multi-storey XLam buildings.” In Proc., COST Action E29 Workshop Earthquake Engineering on Timber Structures. Coimbra, Portugal: Community Research and Development Information Service.
Ceccotti, A., M. Follesa, M. P. Lauriola, and C. Sandhaas. 2006a. “Sofie project–test results on the lateral resistance of cross-laminated wooden panels.” In Proc., 1st European Conf. on Earthquake Engineering and Seismicity. Red Hook, NY: Curran Associates.
Ceccotti, A., M. Fragiacomo, and S. Giordano. 2006b. “Long-term and collapse tests on a timber–concrete composite beam with glued-in connection.” Mater. Struct. 40 (1): 15–25. https://doi.org/10.1617/s11527-006-9094-z.
Ceccotti, A., C. Sandhaas, M. Okabe, M. Yasumura, C. Minowa, and N. Kawai. 2013. “SOFIE project—3D shaking table test on a seven-storey full-scale cross-laminated timber building.” Earthquake Eng. Struct. Dyn. 42 (13): 2003–2021. https://doi.org/10.1002/eqe.2309.
Chen, Z., and M. Popovski. 2020a. “Material-based models for post-tensioned shear wall system with energy dissipators.” Eng. Struct. 213 (Jun): 110543. https://doi.org/10.1016/j.engstruct.2020.110543.
Chen, Z., and M. Popovski. 2020b. “Mechanics-based analytical models for balloon-type cross-laminated timber (CLT) shear walls under lateral loads.” Eng. Struct. 208 (Apr): 109916. https://doi.org/10.1016/j.engstruct.2019.109916.
Chen, Z., M. Popovski, and A. Iqbal. 2020. “Structural performance of post-tensioned CLT shear walls with energy dissipators.” J. Struct. Eng. 146 (4): 04020035. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002569.
Clouston, P., L. A. Bathon, and A. Schreyer. 2005. “Shear and bending performance of a novel wood–concrete composite system.” J. Struct. Eng. 131 (9): 1404–1412. https://doi.org/10.1061/(ASCE)0733-9445(2005)131:9(1404).
Clouston, P., S. Civjan, and L. Bathon. 2004. “Experimental behavior of a continuous metal connector for a wood-concrete composite system.” For. Prod. J. 54 (6): 76–84.
Dagenais, C., L. Ranger, and S. Cuerrier-Auclair. 2016. “Understanding fire performance of wood-concrete composite floor systems.” In Proc., World Conf. on Timber Engineering. Trentino, Italy: Trees and Timber Institute.
Deam, B. L., M. Fragiacomo, and A. H. Buchanan. 2007. “Connections for composite concrete slab and LVL flooring systems.” Mater. Struct. 41 (3): 495–507. https://doi.org/10.1617/s11527-007-9261-x.
Dias, A., et al. 2018. Design of timber-concrete composite structures. Germany: European Cooperation in Science and Technology.
Dias, A., J. Skinner, K. Crews, and T. Tannert. 2015. “Timber-concrete-composites increasing the use of timber in construction.” Eur. J. Wood Wood Prod. 74 (3): 443–451. https://doi.org/10.1007/s00107-015-0975-0.
Dujic, B., K. Strus, R. Zarnic, and A. Ceccotti. 2010. “Prediction of dynamic response of a 7-storey massive XLam wooden building tested on a shaking table.” In Proc., 11th WCTE World Conf. on Timber Engineering, edited by A. Ceccotti. Trentino, Italy: Trees and Timber Institute.
Frangi, A., and M. Knobloch. 2010. “Fire design of timber-concrete composite slabs with screwed connections.” J. Struct. Eng. 136 (2): 219–228. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000101.
Gagnon, S., M. Mohammad, W. M. Toro, and M. Popovski. 2014. “Evaluation of in-plane shear strength of CLT.” In Proc., World Conf. on Timber Engineering. Red Hook, NY: Curran Associates.
Gagnon, S., and M. Popovski. 2011. “Structural design of cross-laminated timber elements.” In CLT handbook: Cross-laminated timber, edited by S. Gagnon and C. Pirvu. Pointe-Claire, QC, Canada: FPInnovations.
Ganey, R., J. Berman, T. Akbas, S. Loftus, J. Daniel Dolan, R. Sause, J. Ricles, S. Pei, J. V. D. Lindt, and H. E. Blomgren. 2017. “Experimental investigation of self-centering cross-laminated timber walls.” J. Struct. Eng. 143 (10): 04017135. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001877.
Gelfi, P., E. Giuriani, and A. Marini. 2002. “Stud shear connection design for composite concrete slab and wood beams.” J. Struct. Eng. 128 (12): 1544–1550. https://doi.org/10.1061/(ASCE)0733-9445(2002)128:12(1544).
Granello, G., A. Palermo, S. Pampanin, S. Pei, and J. van de Lindt. 2020. “Pres-lam buildings: State-of-the-art.” J. Struct. Eng. 146 (6): 04020085. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002603.
Higgins, C., A. R. Barbosa, and C. Blank. 2017. Structural tests of composite concrete-cross-laminated timber floors. Corvallis, OR: Oregon State Univ.
ICC/ES (International Code Council Evaluation Service). 2020. Cross-laminated timber panels for use as components in walls, floors and roofs. Country Club Hills, IL: ICC/ES.
Iqbal, A., S. Pampanin, A. Palermo, and A. H. Buchanan. 2015. “Performance and design of LVL walls coupled with UFP dissipaters.” J. Earthquake Eng. 19 (3): 383–409. https://doi.org/10.1080/13632469.2014.987406.
Jiang, Y., and R. Crocetti. 2019. “CLT-concrete composite floors with notched shear connectors.” Constr. Build. Mater. 195 (Jan): 127–139. https://doi.org/10.1016/j.conbuildmat.2018.11.066.
Krawinkler, H., F. Parisi, L. Ibarra, A. Ayoub, and R. Medina. 2000. Development of a testing protocol for wood frame structures.” Richmond, CA: Consortium of Universities for Research in Earthquake Engineering.
Lukaszewska, E., M. Fragiacomo, and H. Johnsson. 2008. “Laboratory tests and numerical analyses of prefabricated timber—Concrete composite floors.” J. Struct. Eng. 136 (1): 46–55. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000080.
Mai, K. Q., A. Park, and K. Lee. 2018a. “Experimental and numerical performance of shear connections in CLT-concrete composite floor.” Mater. Struct. 51 (84): 1–12. https://doi.org/10.1617/s11527-018-1202-3.
Mai, K. Q., A. Park, K. T. Nguyen, and K. Lee. 2018b. “Full-scale static and dynamic experiments of hybrid CLT–concrete composite floor.” Constr. Build. Mater. 170 (May): 55–65. https://doi.org/10.1016/j.conbuildmat.2018.03.042.
Manaridis, A. 2010. Evaluation of timber-concrete composite floors. Lund, Sweden: Lund Institute of Technology.
Miotto, J. L., and A. A. Dias. 2011. “Evaluation of perforated steel plates as connection in glulam-concrete composite structures.” Constr. Build. Mater. 28 (1): 216–223. https://doi.org/10.1016/j.conbuildmat.2011.08.045.
Moroder, D. 2016. “Floor diaphragms in multi-storey timber buildings.” Ph.D. thesis, Dept. of Civil Engineering, Univ. of Canterbury.
Moroder, D., S. Pampanin, A. Palermo, T. Smith, F. Sarti, and A. Buchanan. 2017. “Diaphragm connections in structures with rocking timber walls.” Struct. Eng. Int. 27 (2): 165–174. https://doi.org/10.2749/101686617X14881932435574.
Mugabo, I., A. R. Barbosa, and M. Riggio. 2019. “Dynamic characterization and vibration analysis of a four-story mass timber building.” Front. Built Environ. 5 (Jul): 86. https://doi.org/10.3389/fbuil.2019.00086.
Mugabo, I., A. R. Barbosa, A. Sinha, C. Higgins, M. Riggio, S. Pei, J. W. van de Lindt, and J. W. Berman. 2021. “System identification of UCSD-NHERI shake-table test of two-story structure with cross-laminated timber rocking walls.” J. Struct. Eng. 147 (4): 04021018. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002938.
Muszynski, L., E. Hansen, S. Fernando, G. Schwarzmann, and J. Rainer. 2017. “Insights into the global cross-laminated timber industry.” BioProducts Bus. 2 (8): 77–92. https://doi.org/10.22382/bpb-2017-008.
O’Neill, J. W., D. Carradine, P. J. Moss, M. Fragiacomo, R. Dhakal, and A. H. Buchanan. 2011. “Design of timber-concrete composite floors for fire resistance.” J. Struct. Fire Eng. 2 (3): 231–242. https://doi.org/10.1260/2040-2317.2.3.231.
Palermo, A., S. Pampanin, and A. Buchanan. 2006a. “Experimental investigations on LVL seismic-resistant wall and frame subassemblies.” In Proc., 1st European Conf. on Earthquake Engineering and Seismology. Red Hook, NY: Curran Associates.
Palermo, A., S. Pampanin, A. Buchanan, and M. Newcombe. 2005. “Seismic design of multi-storey buildings using laminated veneer lumber (LVL).” In Proc., 2005 New Zealand Society for Earthquake Engineering Conf. Wellington, New Zealand: New Zealand Society for Earthquake Engineering.
Palermo, A., S. Pampanin, M. Fragiacomo, A. H. Buchanan, and B. L. Deam. 2006b. “Innovative seismic solutions for multi-storey LVL timber buildings overview of the research program.” In Proc., 9th World Conf. on Timber Engineering WTCE 2006. Portland, OR: Oregon State Univ. Conference Services.
Pei, S., D. Rammer, M. Popovski, T. Williamson, P. Line, and J. W. van de Lindt. 2016. “An overview of CLT research and implementation in North America.” In Proc., World Conf. on Timber Engineering. Vienna, Austria: Vienna Univ. of Technology.
Pei, S., J. W. van de Lindt, A. R. Barbosa, J. Berman, E. McDonnell, J. D. Dolan, H. Blomgren, E. Zimmerman, D. Huang, and S. Wichman. 2019. “Experimental seismic response of a resilient 2-story mass-timber building with post-tensioned rocking walls.” J. Struct. Eng. 145 (11): 04019120. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002382.
Popovski, M., J. Schneider, and M. Schweinsteiger. 2010. “Lateral load resistance of cross laminated wood panels.” In Proc., 11th World Conf. on Timber Engineering, 20–21. Trentino, Italy: Trees and Timber Institute.
Rammer, D. R. 2010. “Fastenings.” In Chap. 8 in Wood handbook: Wood as an engineering material, 1–28. Madison, WI: US Dept. of Agriculture, Forest Service, Forest Products Laboratory.
Ramsey, F. L., and D. W. Schafer. 2013. The statistical sleuth: A course in methods of data analysis. Boston: Brooks/Cole, Cengage Learning.
Schmidt, E. L., M. Riggio, A. R. Barbosa, and I. Mugabo. 2019. “Environmental response of a CLT floor panel: Lessons for moisture management and monitoring of mass timber buildings.” Build. Environ. 148 (Jan): 609–622. https://doi.org/10.1016/j.buildenv.2018.11.038.
Shahnewaz, I., T. Tannert, M. Shahria Alam, and M. Popovski. 2017. “In-plane stiffness of cross-laminated timber panels with openings.” Struct. Eng. Int. 27 (2): 217–223. https://doi.org/10.2749/101686617X14881932436131.
Shephard, A. B., E. C. Fischer, A. R. Barbosa, and A. Sinha. 2021. “Fundamental behavior of timber concrete-composite floors in fire.” J. Struct. Eng. 147 (2): 04020340. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002890.
Smith, T., F. Ludwig, S. Pampanin, M. Fragiacomo, A. Buchanan, B. Deam, and A. Palermo. 2007. “Seismic response of hybrid-LVL coupled walls under quasi-static and pseudo-dynamic testing.” In Proc., 2007 New Zealand Society for Earthquake Engineering Conf. Wellington, New Zealand: New Zealand Society for Earthquake Engineering.
Sustersic, I., M. Fragiacomo, and B. Dujic. 2016. “Seismic analysis of cross laminated multi-story timber buildings using code-prescribed methods: Influence of panel size, connection ductility, and schematization.” J. Struct. Eng. 142 (4): E4015012. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001344.
Symons, D., R. Persaud, and H. Stanislaus. 2010. “Slip modulus of inclined screws in timber–concrete floors.” Proc. Inst. Civ. Eng. Struct. Build. 163 (4): 245–255. https://doi.org/10.1680/stbu.2010.163.4.245.
Tannert, T., M. Follesa, M. Fragiacomo, P. Gonzalez, H. Isoda, D. Moroder, H. Xiong, and J. van de Lindt. 2018. “Seismic design of cross-laminated timber buildings.” Wood Fiber Sci. 50: 3–26. https://doi.org/10.22382/wfs-2018-037.
Taylor, B., A. R. Barbosa, and A. Sinha. 2020. “Cyclic performance of in-plane shear cross-laminated timber panel-to-panel surface spline connections.” Eng. Struct. 218 (Sep): 110726. https://doi.org/10.1016/j.engstruct.2020.110726.
UES (Uniform Evaluation Service). 2010. Evaluation report 192. Ontario, CA: International Association of Plumbing and Mechanical Officials.
van de Lindt, J. W., J. Furley, M. O. Amini, S. Pei, G. Tamagnone, A. R. Barbosa, D. Rammer, P. Line, M. Fragiacomo, and M. Popovski. 2019. “Experimental seismic behavior of a two-story CLT platform building.” Eng. Struct. 183 (15): 408–422. https://doi.org/10.1016/j.engstruct.2018.12.079.
van de Lindt, J. W., S. Pei, S. E. Pryor, H. Shimizu, and H. Isoda. 2010. “Experimental seismic response of a full-scale six-story light-frame wood building.” J. Struct. Eng. 136 (10): 1262–1272. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000222.
Yeoh, D., M. Fragiacomo, M. D. Franceschi, and A. H. Buchanan. 2011. “Experimental tests of notched and plate connectors for LVL-concrete composite beams.” J. Struct. Eng. 137 (2): 261–269. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000288.
Zimmerman, R., and E. McDonnell. 2018. “Framework—Innovation in re-centering mass timber wall buildings.” In Proc., 11th US National Conf. on Earthquake Engineering. Oakland, CA: Earthquake Engineering Research Institute.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Sep 5, 2020
Accepted: May 4, 2021
Published online: Jul 27, 2021
Published in print: Oct 1, 2021
Discussion open until: Dec 27, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Ian Morrell, Arijit Sinha, Christopher Higgins, Bulent Tunc, Andre R. Barbosa, Two-Way Bending Behavior of Cross-Laminated Timber–Concrete Composite Floors with Alternative Shear Connectors, Journal of Structural Engineering, 10.1061/JSENDH.STENG-13290, 150, 8, (2024).
- Ian Morrell, Christopher Higgins, Arijit Sinha, Andre R. Barbosa, Mohit Srivastava, Performance Evaluation of Self-Tapping Screws for Use in Mass Timber-Concrete Composite Floor Connections through Withdrawal from Mass Timber and Concrete Media, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-15865, 36, 2, (2024).
- Ian Morrell, Christopher Higgins, Arijit Sinha, Andre R. Barbosa, Experimental Assessment of Alternative Shear Connections in Cross-Laminated Timber-Concrete Floor Systems, Journal of Structural Engineering, 10.1061/JSENDH.STENG-11443, 149, 5, (2023).
- John Lawson, Scott Breneman, Marco Lo Ricco, Wood Diaphragm Deflections. II: Implementing a Unified Approach for Current CLT and WSP Practice, Journal of Architectural Engineering, 10.1061/JAEIED.AEENG-1574, 29, 3, (2023).
- John Lawson, Scott Breneman, Marco Lo Ricco, Wood Diaphragm Deflections. I: Generalizing Standard Equations Using Mechanics-Based Derivations for Panel Construction, Journal of Architectural Engineering, 10.1061/JAEIED.AEENG-1573, 29, 3, (2023).
- Simon Sanchez Zuluaga, Stylianos Kallioras, Anastasios Tsiavos, Optimization of Synergetic Seismic and Energy Retrofitting Based on Timber Beams and Bio-Based Infill Panels: Application to an Existing Masonry Building in Switzerland, Buildings, 10.3390/buildings12081126, 12, 8, (1126), (2022).
- Mingqian Wang, Qingfeng Xu, Kent A. Harries, Lingzhu Chen, Zhenpeng Wang, Xi Chen, Experimental study on mechanical performance of shear connections in CLT-concrete composite floor, Engineering Structures, 10.1016/j.engstruct.2022.114842, 269, (114842), (2022).