Evaluation of Shear Strength Design Methodologies for Slender Shear-Critical RC Beams
Publication: Journal of Structural Engineering
Volume 139, Issue 4
Abstract
This paper seeks to examine the concrete contribution to shear strength and determine the inclination of the compressive strut within the variable truss model for slender RC shear-critical beams with stirrups. Using the modified compression field theory in place of the conventional statistical regression of experimental data, the expression for the concrete contribution to shear strength was derived, and the inclination of compressive struts was determined. A simplified explicit expression for shear strength was then provided, with which shear strength can be calculated without extensive iterative computations. This method was then verified using the available experimental data of 209 RC rectangular beams with stirrups and compared with the current methods from the American Concrete Institute and the Canadian Standards Association. The theoretical results are shown to be consistent with the experimentally observed behavior of shear-critical RC beams.
Get full access to this article
View all available purchase options and get full access to this article.
References
AASHTO. (2004). LRFD bridge design specifications, 3rd Ed., AASHTO, Washington, DC.
American Concrete Institute (ACI). (2008). “Building code requirements for structural concrete and commentary.” ACI 318R-08, Farmington Hills, MI.
ASCE-American Concrete Institute (ACI) Committee 426. (1973). “Shear strength of reinforced concrete members.” J. Struct. Eng., 99(6), 1091–1187.
ASCE-American Concrete Institute (ACI) Committee 445. (1998). “Recent approaches on shear design of structural concrete.” J. Struct. Eng., 124(12), 1375–1417.
Canadian Standards Association (CSA). (2004). “Design of concrete structures.” CAN CSA A23.3-04, Rexdale, ON, Canada.
Collins, M. P., and Mithell, D. (1991). Prestressed concrete structures, Prentice Hall, Englewood Cliffs, NJ.
De Silva, S., Mutsuyoshi, H., and Witchukreangkrai, E. (2008). “Evaluation of shear crack with in I-shaped prestressed reinforced concrete beams.” J. Adv. Concrete Technol., 6(3), 443–458.
El-Metwally, A. S. (2004). “Shear strength of reinforced and PC beams using shear friction.” Ph.D. thesis, Calgary Univ., Calgary, AB, Canada.
Kassian, W. A. (1990). “Concrete contribution to shear strength in slender beams.” Ph.D. thesis, Univ. of Alberta, Edmonton, AB, Canada.
Kim, K. S. (2004). “Shear behavior of reinforced concrete beams and prestressed concrete beams.” Ph.D. thesis, Univ. of Illinois at Urbana-Champaign, Urbana, IL.
Li, B., and Tran, C. T. N. (2008). “Reinforced concrete beam analysis supplementing concrete contribution in truss models.” Eng. Struct., 30(11), 3285–3294.
Li, B., and Tran, C. T. N. (2012). “Determination of inclination of strut and shear strength using variable angle truss model for shear-critical RC beams.” Struct. Eng. Mech., 41(4), 459–477.
Lu, Y. (2007). “Theoretical and experimental research on shear capacity of high strength concrete beams with high strength stirrups.” Ph.D. thesis, Hunan Univ., Changsha, China.
Vecchio, F. J., and Collins, M. P. (1986). “The modified compression field theory for reinforced concrete elements subjected to shear.” ACI J. Proc., 83(2), 219–231.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jul 25, 2011
Accepted: Jul 20, 2012
Published online: Aug 10, 2012
Published in print: Apr 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.