Effect of Hydration Products on the Interfacial Bonding Properties between Asphalt Binder and Steel Slag Coarse Aggregate
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 2
Abstract
Steel slag needs aging treatment before being used for the coarse aggregate of asphalt mixtures because it has volumetric instability due to the hydration of calcium oxide. This paper investigates the effect of hydration products on the bonding properties between asphalt binder and steel slag coarse aggregates subjected to natural aging treatment. A scanning electron microscope, a fluorescence microscope, and X-ray diffraction testing were used to study the surface morphology, microstructure, and mineral phase of the hydration product layer generated on the aggregate surface of steel slag. A modified water boiling test was conducted to evaluate the water stripping resistance of asphalt film with different boiling times. Pull-off testing on real steel slag aggregates was performed to investigate the effect of the hydration product layer and surface treatment on the bonding strength and interface failure mode. Test results indicated that the hydration products exhibited a loose and porous structure and formed an interlayer to prevent the asphalt film from directly adhering to the aggregate surface of steel slag. The hydration product layer could improve the initial stripping resistance but impair the long-term stripping resistance with increased boiling time. The interlayer of hydration products tended to be the weakest link between asphalt film and steel slag aggregate when subjected to pull-off strength damage. The bonding strength showed a negative linear relation with the stripping rate of asphalt film. After steel slag surface treatment with water-based capillary inorganic waterproofer, the pull-off failure of hydration product layer was avoided and thus improved the bonding strength between asphalt film and steel slag aggregate. The bonding strength and failure mode between asphalt-slag adhesion could be well examined by using pull-off tests. Better insights into asphalt–slag adhesion are useful to design durable asphalt mixtures containing steel slag aggregate.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
This research was supported by Shanxi Road & Bridge Construction Group Research project (No. D03-201912-01), the Department of Transportation of Shanxi Province research project (No. 2021-1-7), the Fundamental Research Funds for the Central Universities (No. WUT: 2019III152CG) and the National Key R&D Program of China (No. 2019YFC1904900). The support from Shangluo Freeway Co., Ltd., Henan Province, China, is also acknowledged.
References
Bevacqua, M. T., T. Isernia, F. G. Praticò, and S. Zumbo. 2021. “A method for bottom-up cracks healing via selective and deep microwave heating.” Autom. Constr. 121 (Jan): 103426. https://doi.org/10.1016/j.autcon.2020.103426.
Chen, Z., Z. Gong, Y. Jiao, Y. Wang, K. Shi, and J. Wu. 2020. “Moisture stability improvement of asphalt mixture considering the surface characteristics of steel slag coarse aggregate.” Constr. Build. Mater. 251 (2): 118987. https://doi.org/10.1016/j.conbuildmat.2020.118987.
Chen, Z., Y. Jiao, S. Wu, and F. Tu. 2018. “Moisture-induced damage resistance of asphalt mixture entirely composed of gneiss and steel slag.” Constr. Build. Mater. 177 (Jul): 332–341. https://doi.org/10.1016/j.conbuildmat.2018.05.097.
Chen, Z., S. Wu, Y. Xiao, W. Zeng, M. Yi, and J. Wan. 2016. “Effect of hydration and silicone resin on basic oxygen furnace slag and its asphalt mixture.” J. Cleaner Prod. 112 (Jan): 392–400. https://doi.org/10.1016/j.jclepro.2015.09.041.
Chen, Z., J. Xie, Y. Xiao, J. Chen, and S. Wu. 2014. “Characteristics of bonding behavior between basic oxygen furnace slag and asphalt binder.” Constr. Build. Mater. 64 (Aug): 60–66. https://doi.org/10.1016/j.conbuildmat.2014.04.074.
Coomarasamy, A., and T. L. Walzak. 1995. “Effects of moisture on surface chemistry of steel slags and steel slag-asphalt paving mixes.” Transp. Res. Rec. 1492 (Dec): 85–95.
Dhoble, Y. N., and S. Ahmed. 2018. “Review on the innovative uses of steel slag for waste minimization.” J. Mater. Cycles Waste Manage. 20 (3): 1373–1382. https://doi.org/10.1007/s10163-018-0711-z.
Drissen, P., A. Ehrenberg, M. Kühn, and M. Dirk. 2009. “Recent development in slag treatment and dust recycling.” Steel Res. Int. 80 (10): 737–745. https://doi.org/10.2374/sri09sp055.
Eloneva, S., A. Said, C. J. Fogelholm, and R. Zevenhoven. 2010. “Feasibility study of a method utilizing carbon dioxide and steelmaking slags to produce precipitated calcium carbonate (PCC).” In Proc., 2nd Int. Conf. on Applied Energy (ICAE 2010), 169–178. Singapore: National Univ. of Singapore.
Esther, L.-A., L.-G. Pedro, I.-V. Irune, and F. Gerardo. 2020. “Comprehensive analysis of the environmental impact of electric arc furnace steel slag on asphalt mixtures.” J. Cleaner Prod. 275 (Jul): 123121. https://doi.org/10.1016/j.jclepro.2020.123121.
Fan, Z., B. Hong, J. Lin, C. Chen, D. Wang, and M. Oeser. 2021. “Understanding the wetting and water-induced dewetting behaviors of bitumen on rough aggregate surfaces.” Langmuir 37 (11): 3420–3427. https://doi.org/10.1021/acs.langmuir.0c03667.
Ferreira, T., and W. Rasband. 2012. “ImageJ User Guide IJ 1.46r.” Accessed October 2, 2012. http://imagej.nih.gov/ij/docs/guide.
Guo, J., Y. Bao, and M. Wang. 2018. “Steel slag in China: Treatment, recycling, and management.” Waste Manage. 78 (Aug): 318–330. https://doi.org/10.1016/j.wasman.2018.04.045.
Hasita, S., R. Rachan, A. Suddeepong, S. Horpibulsuk, A. Arulrajah, A. Mohammadinia, and R. Nazir. 2020. “Performance improvement of asphalt concretes using steel slag as a replacement material.” J. Mater. Civ. Eng. 32 (8): 04020227. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003306.
Jiang, L., C. L. Dong, and S. Y. Wang. 2020. “Reducing volume expansion of steel slag by using a surface hydrophobic waterproof structure.” J. Mater. Civ. Eng. 32 (10): 04020303. https://doi.org/10.1061/(ASCE)MT.1943-5533.0003320.
Kumar, H., and S. Varma. 2020. “A review on utilization of steel slag in hot mix asphalt.” Int. J. Pavement Res. Technol. 14 (Aug): 232–242. https://doi.org/10.1007/s42947-020-0025-0.
Kumar, P., D. S. Kumar, K. Marutiram, and S. Prasad. 2017. “Pilot-scale steam aging of steel slags.” Waste Manage. Res. 35 (6): 602. https://doi.org/10.1177/0734242X17694247.
Li, Y. J., and Y. L. Gong. 2011. “Study on influence of water based capillary inorganic water proofer on concrete performance.” Appl. Mech. Mater. 99–100 (Sep): 1000–1004. https://doi.org/10.4028/www.scientific.net/AMM.99-100.1000.
Ma, L., D. Xu, S. Wang, and X. Gu. 2019. “Expansion inhibition of steel slag in asphalt mixture by a surface water isolation structure.” Road Mater. Pavement Des. 21 (Apr): 2215–2229. https://doi.org/10.1080/14680629.2019.1601588.
MOT (Ministry of Transport of the People’s Republic of China). 2004. Technical specifications for construction of highway asphalt pavements. [In Chinese.] JTG F40-2004. Beijing: MOT.
MOT (Ministry of Transport of the People’s Republic of China). 2011. Standard test methods of bitumen and bituminous mixtures for highway engineering. [In Chinese.] JTG E20-2011. Beijing: MOT.
Nishinohara, I., N. Kase, H. Maruoka, S. Hirai, and H. Eba. 2013. “Powder X-ray diffraction analysis of lime-phase solid solution in converter slag.” Tetsu-to-Hagané/J. Iron Steel Inst. Jpn. 99 (9): 553–558. https://doi.org/10.2355/tetsutohagane.99.552.
Qazizadeh, M. J., H. Farhad, A. Kavussi, and A. Sadeghi. 2018. “Evaluating the fatigue behavior of asphalt mixtures containing electric arc furnace and basic oxygen furnace slags using surface free energy estimation.” J. Cleaner Prod. 188 (Apr): 355–361. https://doi.org/10.1016/j.jclepro.2018.04.035.
Rondón-Quintana, H. A., J. C. Ruge-Cárdenas, and M. M. D. Farias. 2019. “Behavior of hot-mix asphalt containing blast furnace slag as aggregate: Evaluation by mass and volume substitution.” J. Mater. Civ. Eng. 31 (2): 04018364. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002574.
Shen, A., C. Zhai, Y. Guo, and X. Yang. 2018. “Mechanism of adhesion property between steel slag aggregate and rubber asphalt.” J. Adhes. Sci. Technol. 32 (24): 2727–2740. https://doi.org/10.1080/01694243.2018.1507505.
Shen, D.-H., C.-M. Wu, and J.-C. Du. 2009. “Laboratory investigation of basic oxygen furnace slag for substitution of aggregate in porous asphalt mixture.” Constr. Build. Mater. 23 (1): 453–461. https://doi.org/10.1016/j.conbuildmat.2007.11.001.
Václavík, V., M. Ondová, T. Dvorský, A. Eštoková, M. Fabiánová, and L. Gola. 2020. “Sustainability potential evaluation of concrete with steel slag aggregates by the LCA method.” Sustainability 12 (23): 9873. https://doi.org/10.3390/su12239873.
Vaverka, J., and K. Sakurai. 2014. “Quantitative determination of free lime amount in steelmaking slag by X-ray diffraction.” ISIJ Int. 54 (6): 1334–1337. https://doi.org/10.2355/isijinternational.54.1334.
Wang, Q., and P. Y. Yan. 2010. “Hydration properties of basic oxygen furnace steel slag.” Constr. Build. Mater. 24 (7): 1134–1140. https://doi.org/10.1016/j.conbuildmat.2009.12.028.
Xie, J., J. Chen, S. Wu, J. Lin, and W. Wei. 2013. “Performance characteristics of asphalt mixture with basic oxygen furnace slag.” Constr. Build. Mater. 38 (Jan): 796–803. https://doi.org/10.1016/j.conbuildmat.2012.09.056.
Xie, J., Z. Chen, L. Pang, and S. Wu. 2014. “Implementation of modified pull-off test by UTM to investigate bonding characteristics of bitumen and basic oxygen furnace slag (BOF).” Constr. Build. Mater. 57 (Feb): 61–68. https://doi.org/10.1016/j.conbuildmat.2014.01.083.
Zhang, J., A. K. Apeagyei, J. Grenfell, and G. D. Airey. 2016. “Experimental study of moisture sensitivity of aggregate-bitumen bonding strength using a new pull-off test.” In Vol. 11 of Proc., 8th RILEM Int. Symp. on Testing and Characterization of Sustainable and Innovative Bituminous Materials, 719–733. Dordrecht, Netherlands: Springer. https://doi.org/10.1007/978-94-017-7342-3_58.
Zhou, X., G. Zhao, S. Tighe, M. Chen, S. Wu, S. Adhikari, and Y. Gao. 2020. “Quantitative comparison of surface and interface adhesive properties of fine aggregate asphalt mixtures composed of basalt, steel slag, and andesite.” Constr. Build. Mater. 246 (Feb): 118507. https://doi.org/10.1016/j.conbuildmat.2020.118507.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Dec 1, 2021
Accepted: May 24, 2022
Published online: Nov 30, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 30, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Peng Yin, Baofeng Pan, Zihan Li, Bozong Jiao, Yue Liu, Multiscale Analysis of the Function Mechanism of Aging Action on the Adhesion Properties between Asphalt and Aggregate, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-18206, 36, 9, (2024).
- Hassan Ziari, Mahdi Zalnezhad, Mohammad Ali Ziari, Performance Evaluation of Colored Slurry Seal Mixture with Steel Slag as a Substituent of Natural Aggregates, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17172, 36, 7, (2024).