Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions
Publication: Journal of Materials in Civil Engineering
Volume 35, Issue 2
Abstract
The corrosion of steel fibers is a direct cause of the deterioration of steel fiber-reinforced concrete in chloride environments. This study mainly investigated the corrosion behavior of steel fibers exposed to NaCl solutions with , 10, 11, 12, and 13. The corrosion rate of the steel fibers was calculated according to the change of the diameter and ultimate tensile load. The electrochemical parameters of the steel fibers corrosion were continuously monitored. The morphology of the steel fibers affected by chloride attack was observed by scanning electron microscope (SEM). The results reveal that the corrosion rate of the steel fibers decreased as the pH of the NaCl solution increased from 7 to 13, and it was very small at . According to the open circuit potential, corrosion potential, corrosion current density, and electrochemical impedance spectroscopy, the steel fibers exhibited a high corrosion tendency and corrosion rate when exposed to NaCl solutions with . However, they exhibited low corrosion tendency in the chloride solution with . The surface roughness of the steel fibers exhibited only a slight increase after exposure to the NaCl solution with for 180 days.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data generated or used during this study appear in the published article.
Acknowledgments
The authors gratefully acknowledge the financial support of National Natural Science Foundation of China (52078468 and 52108207) and Natural Science Foundation of Henan (222300420080).
References
Abbas, S., and M. L. Nehdi. 2018. “Mechanical behavior of RC and SFRC precast tunnel lining segments under chloride ions exposure.” J. Mater. Civ. Eng. 30 (4): 04018047. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002217.
Angst, U., A. Ronnquist, B. Elsener, C. K. Larsen, and O. Vennesland. 2011. “Probabilistic considerations on the effect of specimen size on the critical chloride content in reinforced concrete.” Corros. Sci. 53 (1): 177–187. https://doi.org/10.1016/j.corsci.2010.09.017.
Balouch, S. U., J. P. Forth, and J. L. Granju. 2010. “Surface corrosion of steel fibre reinforced concrete.” Cem. Concr. Res. 40 (3): 410–414. https://doi.org/10.1016/j.cemconres.2009.10.001.
Berrocal, C. G., I. Fernandez, K. Lundgren, and I. Lofgren. 2017. “Corrosion-induced cracking and bond behaviour of corroded reinforcement bars in SFRC.” Composties, Part B 113 (Mar): 123–137. https://doi.org/10.1016/j.compositesb.2017.01.020.
Berrocal, C. G., K. Lundgren, and I. Lofgren. 2016. “Corrosion of steel bars embedded in fibre reinforced concrete under chloride attack: State of the art.” Cem. Concr. Res. 80 (Feb): 69–85. https://doi.org/10.1016/j.cemconres.2015.10.006.
Boulekbache, B., M. Hamrat, M. Chemrouk, and S. Amziane. 2016. “Flexural behaviour of steel fibre-reinforced concrete under cyclic loading.” Constr. Build. Mater. 126 (Nov): 253–262. https://doi.org/10.1016/j.conbuildmat.2016.09.035.
Chang, H., Z. Jin, T. Zhao, B. Wang, Z. Li, and J. Liu. 2020. “Capillary suction induced water absorption and chloride transport in non-saturated concrete: The influence of humidity, mineral admixtures and sulfate ions.” Constr. Build. Mater. 236 (Mar): 117581. https://doi.org/10.1016/j.conbuildmat.2019.117581.
Chen, G., M. Hadi, D. Gao, and L. Zhao. 2015. “Experimental study on the properties of corroded steel fibres.” Constr. Build. Mater. 79 (Mar): 165–172. https://doi.org/10.1016/j.conbuildmat.2014.12.082.
Dauberschmidt, C. 2006. “Untersuchungen zu den korrosions mechanismen von stahlfasern in chloridhaltigem betontechnischen hochschule aachen.” Ph.D. thesis, Technischen Hochschule Aachen.
Dauberschmidt, C., and M. Raupach. 2005. “Passivity and depassivation of steel fibres and cold-drawn steel wires in artificial pore solution and concrete containing chlorides.” In Proc., EUROCORR 2005. Brussels, Belgium: European Federation of Corrosion.
Granju, J. L., and S. Balouch. 2005. “Corrosion of steel fibre reinforced concrete from the cracks.” Cem. Concr. Res. 35 (3): 572–577. https://doi.org/10.1016/j.cemconres.2004.06.032.
Hou, D., T. Li, and P. Wang. 2018a. “Molecular dynamics study on the structure and dynamics of NaCl solution transport in the nanometer channel of CASH gel.” ACS Sustainable Chem. Eng. 6 (7): 9498–9509. https://doi.org/10.1021/acssuschemeng.8b02126.
Hou, D., W. Zhang, M. Sun, P. Wang, M. Wang, J. Zhang, and Z. Li. 2020. “Modified Lucas-Washburn function of capillary transport in the calcium silicate hydrate gel pore: A coarse-grained molecular dynamics study.” Cem. Concr. Res. 136 (Oct): 106166. https://doi.org/10.1016/j.cemconres.2020.106166.
Hou, L., B. Zhou, S. Guo, N. Zhuang, and D. Chen. 2018b. “Bond-slip behavior between pre-corroded rebar and steel fiber reinforced concrete.” Constr. Build. Mater. 182 (Sep): 637–645. https://doi.org/10.1016/j.conbuildmat.2018.06.116.
Jansson, A., M. Flansbjer, I. Lofgren, K. Lundgren, and K. Gylltoft. 2012. “Experimental investigation of surface crack initiation, propagation and tension stiffening in self-compacting steel–fibre-reinforced concrete.” Mater. Struct. 45 (8): 1127–1143. https://doi.org/10.1617/s11527-012-9821-6.
Jin, Z., H. Chang, F. Du, T. Zhao, Y. Jiang, and Y. Chen. 2020. “Influence of SAP on the chloride penetration and corrosion behavior of steel bar in concrete.” Corros. Sci. 171 (Jul): 108714. https://doi.org/10.1016/j.corsci.2020.108714.
Lee, S. F., E. Jimenez-Relinque, I. Martinez, and M. Castellote. 2022. “Photoelectrochemical global approach to the behaviour of nanostructured anatase under different irradiation conditions.” Catal. Today. 397–399 (Aug): 286–295. https://doi.org/10.1016/j.cattod.2021.09.006.
Liu, G., Y. Zhang, M. Wu, and R. Huang. 2017. “Study of depassivation of carbon steel in simulated concrete pore solution using different equivalent circuits.” Constr. Build. Mater. 157 (Dec): 357–362. https://doi.org/10.1016/j.conbuildmat.2017.09.104.
Liu, J., B. Zhang, W. H. Qi, Y. G. Deng, and R. D. K. Misra. 2020. “Corrosion response of zinc phosphate conversion coating on steel fibers for concrete applications.” J. Mater. Res. Technol. 9 (3): 5912–5921. https://doi.org/10.1016/j.jmrt.2020.03.117.
Lv, L., J. Wang, R. Xiao, M. Fang, and Y. Tan. 2021. “Influence of steel fiber corrosion on tensile properties and cracking mechanism of ultra-high performance concrete in an electrochemical corrosion environment.” Constr. Build. Mater. 278 (Apr): 122338. https://doi.org/10.1016/j.conbuildmat.2021.122338.
Mangat, P. S., and K. Gurusamy. 1988. “Corrosion resistance of steel fibres in concrete under marine exposure.” Cem. Concr. Res. 18 (1): 44–54. https://doi.org/10.1016/0008-8846(88)90120-2.
Marcos-Meson, V., G. Fischer, A. Solgaard, C. Edvardsen, and A. Michel. 2020. “Mechanical performance and corrosion damage of steel fibre reinforced concrete: A multiscale modelling approach.” Constr. Build. Mater. 234 (Feb): 117847. https://doi.org/10.1016/j.conbuildmat.2019.117847.
Mehta, P. K., and P. J. M. Monteiro. 2014. Concrete: Microstructure, properties, materials. 4th ed. New York: McGraw-Hill.
Michel, A., A. O. S. Solgaard, B. J. Pease, M. R. Geiker, H. Stang, and J. F. Olesen. 2013. “Experimental investigation of the relation between damage at the concrete-steel interface and initiation of reinforcement corrosion in plain and fibre reinforced concrete.” Corros. Sci. 77 (Dec): 308–321. https://doi.org/10.1016/j.corsci.2013.08.019.
Montes, P., T. W. Bremner, and D. H. Lister. 2004. “Influence of calcium nitrite inhibitor and crack width on corrosion of steel in high performance concrete subjected to a simulated marine environment.” Cem. Concr. Compos. 26 (3): 243–253. https://doi.org/10.1016/S0958-9465(03)00043-X.
Ngo, T. T., N. T. Tran, D. J. Kim, and T. C. Pham. 2021. “Effects of corrosion level and inhibitor on pullout behavior of deformed steel fiber embedded in high performance concrete.” Constr. Build. Mater. 280 (Apr): 122449. https://doi.org/10.1016/j.conbuildmat.2021.122449.
Paul, S. C., and G. G. P. A. van Zijl. 2014. “Crack formation and chloride induced corrosion in reinforced strain hardening cement-based composite (R/SHCC).” J. Adv. Concr. Technol. 12 (9): 340–351. https://doi.org/10.3151/jact.12.340.
Raupach, M., C. Dauberschmidt, and T. Eichler. 2004. “Corrosion behaviour of steel fibres in concrete containing chlorides.” In Proc., EUROCORR 2004-European Corrosion Conf. Brussels, Belgium: European Federation of Corrosion.
Saremi, M., and E. Mahallati. 2002. “A study on chloride-induced depassivation of mild steel in simulated concrete pore solution.” Cem. Concr. Res. 32 (12): 1915–1921. https://doi.org/10.1016/S0008-8846(02)00895-5.
Shi, X., N. Xie, K. Fortune, and J. Gong. 2012. “Durability of steel reinforced concrete in chloride environments: An overview.” Constr. Build. Mater. 30 (May): 125–138. https://doi.org/10.1016/j.conbuildmat.2011.12.038.
Song, Q., R. Yu, Z. Shui, S. Rao, X. Wang, M. Sun, and C. Jiang. 2018. “Steel fibre content and interconnection induced electrochemical corrosion of ultra-high performance fibre reinforced concrete (UHPFRC).” Cem. Concr. Compos. 94 (Nov): 191–200. https://doi.org/10.1016/j.cemconcomp.2018.09.010.
Tang, K. 2017. “Stray current induced corrosion of steel fibre reinforced concrete.” Cem. Concr. Res. 100 (Oct): 445–456. https://doi.org/10.1016/j.cemconres.2017.08.004.
Tang, K. 2019. “Stray alternating current (AC) induced corrosion of steel fibre reinforced concrete.” Corros. Sci. 152 (May): 153–171. https://doi.org/10.1016/j.corsci.2019.02.006.
Tran, N. T., S. Pyo, and D. J. Kim. 2015. “Corrosion resistance of strain-hardening steel-fiber-reinforced cementitious composites.” Cem. Concr. Compos. 63 (Oct): 17–29. https://doi.org/10.1016/j.cemconcomp.2015.07.006.
Yang, L., Z. Zhang, D. Gao, J. Tang, H. Chang, and G. Liu. 2022. “Mechanical property evolution and chloride transport of steel fiber-reinforced concrete exposed to simulated marine environments.” Mater. Struct. 55 (4): 1–17. https://doi.org/10.1617/s11527-021-01806-7.
Yoo, D. Y., W. Shin, and B. Chun. 2020. “Corrosion effect on tensile behavior of ultra-high-performance concrete reinforced with straight steel fibers.” Cem. Concr. Compos. 109 (May): 103566. https://doi.org/10.1016/j.cemconcomp.2020.103566.
Zheng, H., C. S. Poon, and W. Li. 2020. “Mechanistic study on initial passivation and surface chemistry of steel bars in nano-silica cement pastes.” Cem. Concr. Compos. 112 (Sep): 103661. https://doi.org/10.1016/j.cemconcomp.2020.103661.
Information & Authors
Information
Published In
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 16, 2022
Accepted: May 23, 2022
Published online: Nov 30, 2022
Published in print: Feb 1, 2023
Discussion open until: Apr 30, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Lin Yang, Yangyang Tai, Danying Gao, Zhenqing Zhang, Xiaoting Fu, Ying Li, Guowen Sun, The Effect of Chloride Content on Corrosion of Steel Fibers in Chloride-Contaminated Simulated Concrete Pore Solutions, Journal of Materials in Civil Engineering, 10.1061/JMCEE7.MTENG-17462, 36, 8, (2024).
- Yuguo Zhang, Congtao Sun, Peng Zhang, Ming Sun, Yuanjie Geng, Maomi Zhao, Liang Fan, Nazhen Liu, Jizhou Duan, Chloride binding of monosulfate hydrate (AFm) and its effect on steel corrosion in simulated concrete pore solution, Journal of Building Engineering, 10.1016/j.jobe.2023.105945, 67, (105945), (2023).