Abstract
Production of self-healing concrete involves the immobilization of a bacterium and calcium-based bacterial nutrient on a carrier material before being added to the concrete mixture. The objective of this paper was to test the potential of using gum arabic of Acacia senegal (Hashab) to immobilize Bacillus subtilis on coarse sand for production of self-healing concrete. Dried bacterial spores, gum arabic powder, and calcium lactate were mixed thoroughly in a 1-L flask. The mixture was wetted by adding tap water gradually until spore-coated sand pellets were formed and then left to dry. Three mortar mixtures with different concentrations (2.5%, 5%, and 10%) of spore-coated sand pellets were then prepared and left for 24 h at room temperature. Of these, 12 mortar prisms were cast. Prisms were subjected to three-point load testing under a controlled and careful rate of loading until visible cracks appeared on the surface of the prism. Crack healing was then monitored for 14 days using stereoscopy and a digital image camera under three curing regimes, namely wet, wet–dry cycles, and polyethylene sheets. Results showed that the efficiency of healing increased with an increase in the percentage of spore-coated sand pellets in the mix without causing a significant impact on prisms strength for mixes with 2.5% and 5% of pellets. The results give an evidence to use gum arabic as a novel, abundant, and sustainable material for immobilization of bacteria on sand surface to produce self-healing concrete.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors would like to thank Veterinary Medicine College, University of Bahri, and the Faculty of Pharmacy, University of Karary, for providing the bacteria spores and broth. Also, thanks go to the Material Research Centre (MRC) for conducting the XRD test.
References
Afiq, M., H. Abdullah, N. Ain, and H. Abdullah. 2018. “Development and performance of bacterial self-healing concrete—A review.” Mater. Sci. Eng. 431 (6): 062003. https://doi.org/10.1088/1757-899X/431/6/062003.
Algaifi, H., S. A. Bakar, A. R. M. Sam, M. Ismail, A. R. Z. Abidin, S. Shahir, and W. A. H. Altowayti. 2020. “Insight into the role of microbial calcium carbonate and the factors involved in self-healing concrete.” Constr. Build. Mater. 254 (Sep): 119258. https://doi.org/10.1016/j.conbuildmat.2020.119258.
Algaifi, H. A., S. A. Bakar, R. Alyousef, A. R. M. Sam, M. W. Ibrahim, S. Shahidan, M. Ibrahim, and B. A. Salami. 2021. “Bio-inspired self-healing of concrete cracks using new B. pseudomycoides species.” J. Mater. Res. Technol. 12 (May): 967–981. https://doi.org/10.1016/j.jmrt.2021.03.037.
Al-Tabbaa, A., C. Litina, P. Giannaros, A. Kanellopoulos, and L. Souza. 2019. “First UK field application and performance of microcapsule-based self-healing concrete.” Constr. Build. Mater. 208 (May): 669–685. https://doi.org/10.1016/j.conbuildmat.2019.02.178.
Alves, L., L. Alves, M. Mello, and S. Barros. 2019. “Characterization of bioconcrete and the properties for self-healing.” Proceedings 38 (1): 4. https://doi.org/10.3390/proceedings2019038004.
BSI (British Standard Institution). 1985. Testing aggregates Part 1: Methods of determination of particle size distribution. BS 812. London: BSI.
BSI (British Standard Institution). 1992. Specification of aggregate from natural sources for concrete. BS 882. London: BSI.
BSI (British Standard Institution). 2005. Methods of testing cement. Determination of strength. BS EN 196-1. London: BSI.
De Belie, N., et al. 2018. “A review of self-healing concrete for damage management of structures.” Adv. Mater. Interfaces 5 (17): 1800074. https://doi.org/10.1002/admi.201800074.
Feng, J., B. Chen, W. Sun, and Y. Wang. 2021. “Microbial induced calcium carbonate precipitation study using Bacillus subtilis with application to self-healing concrete preparation and characterization.” Constr. Build. Mater. 280 (Apr): 122460. https://doi.org/10.1016/j.conbuildmat.2021.122460.
Griño, A. A., M. Daly, M. Klarissa, and J. M. C. Ongpeng. 2020. “Bio-influenced self-healing mechanism in concrete and its testing: A review.” Appl. Sci. 10 (15): 5161. https://doi.org/10.3390/app10155161.
Gupta, S., and K. H. Wei. 2016. “Encapsulation technology and techniques in self-healing concrete.” J. Mater. Civ. Eng. Am. Soc. Civ. Eng. 28 (12): 04016165. https://doi.org/10.1061/(ASCE)MT.1943-5533.0001687.
Jadhav, U. U., M. Lahoti, Z. Chen, J. Qiu, B. Cao, and E. H. Yang. 2018. “Viability of bacterial spores and crack healing in bacteria-containing geopolymer.” Constr. Build. Mater. 169 (30): 716–723. https://doi.org/10.1016/j.conbuildmat.2018.03.039.
Jonkers, H. M. 2011. “Bacteria-based self-healing concrete.” Constr. Build. Mater. 56 (1): 1–12.
Jonkers, H. M., A. Thijssen, G. Muyzer, O. Copuroglu, and E. Schlangen. 2010. “Application of bacteria as self-healing agent for the development of sustainable concrete.” Ecol. Eng. 36 (2): 230–235. https://doi.org/10.1016/j.ecoleng.2008.12.036.
Khaliq, W., and M. B. Ehsan. 2016. “Crack healing in concrete using various bio influenced self-healing techniques.” Constr. Build. Mater. 102 (Jan): 349–357. https://doi.org/10.1016/j.conbuildmat.2015.11.006.
Muhammad, N. Z., et al. 2016. “Tests and methods of evaluating self-healing efficiency of concrete: A review.” Constr. Build. Mater. 112 (May): 1123–1132. https://doi.org/10.1016/j.conbuildmat.2016.03.017.
Neville, A. M., and J. J. Brooks. 2010. Concrete technology. 2nd ed. London: Pearson Education.
Satti, S. A. A., and Y. H. Ahmed. 2018. “Use of gum arabic (Acacia seyal) as concrete admixture.” In Proc., Conf. Civil Engineering 2018, 198–202. Khartoum, Sudan: Univ. of Khartoum.
Seifan, M., A. K. Samani, and A. Berenjian. 2016. “Bioconcrete: Next generation of self-healing concrete.” Appl. Microbiol. Biotechnol. 100 (6): 2591–2602. https://doi.org/10.1007/s00253-016-7316-z.
Shaheen, N., R. Arsalan, W. Khaliq, H. Murtaza, and R. Iqbal. 2019. “Synthesis and characterization of bio-immobilized nano/micro inert and reactive additives for feasibility investigation in self-healing concrete.” Constr. Build. Mater. 226 (Nov): 492–506. https://doi.org/10.1016/j.conbuildmat.2019.07.202.
Talaiekhozan, A., and M. Z. Abd Majid. 2014. “A review of self-healing concrete research development.” J. Environ. Treatment Tech. 2 (1): 1–11.
Uchechukwu, A., G. Abdulbasir, and G. Abdulkadir. 2018. “Gum arabic as an admixture for cement concrete production.” Constr. Build. Mater. 176 (Apr): 201–212. https://doi.org/10.1016/j.conbuildmat.2018.04.160.
Vermeer, C. M., E. Rossi, J. Tamis, H. M. Jonkers, and R. Kleerebezem. 2021. “Resources, conservation & recycling from waste to self-healing concrete: A proof-of-concept of a new application for polyhydroxyalkanoate.” Resour. Conserv. Recycl. 164 (Mar): 105206. https://doi.org/10.1016/j.resconrec.2020.105206.
Wang, J. Y., N. De Belie, and W. Verstraete. 2012. “Diatomaceous earth as a protective vehicle for bacteria applied for self-healing concrete.” J. Ind. Microbiol. Biotechnol. 39 (4): 567–577. https://doi.org/10.1007/s10295-011-1037-1.
Wang, J. Y., H. Soens, W. Verstraete, and N. De Belie. 2014. “Self-healing concrete by use of microencapsulated bacterial spores.” Cem. Concr. Res. 56 (Nov): 139–152. https://doi.org/10.1016/j.cemconres.2013.11.009.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 34 • Issue 11 • November 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Oct 9, 2021
Accepted: Mar 16, 2022
Published online: Aug 25, 2022
Published in print: Nov 1, 2022
Discussion open until: Jan 25, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.