NMR Study on the Pore Structure Development of Cement Paste with Bleeding during Hydration
Publication: Journal of Materials in Civil Engineering
Volume 32, Issue 12
Abstract
Previous studies focused on the determination and simulation of the bleeding extent of fresh cement paste and provided objective conclusions. However, few studies exist on the influence of bleeding on the final structure of cement paste. This study focused on the microstructure development during the hydration of cement paste with various bleeding caused by the water-cement ratio, the slag replacement, and the superplasticizer. To obtain information on the porosity profile and pore size distribution, the sample was measured using a low-field nuclear magnetic resonance (NMR) with Hahn spin sequence and Carr-Purcell-Meiboom-Gill (CPMG) sequence from top to bottom. The results showed that increasing bleeding thickness leads to a heterogeneous structure from top to bottom in terms of porosity profile and pore size distribution. Moreover, hydration can reduce the difference in the pore structure, especially when the bleeding depth is small. It was also found that the influence of bleeding depth on the pore size distribution of gels pores during hydration is minor compared with that of the capillary pores. Furthermore, detailed discussions on the connections between the bleeding and the final structure are presented in this paper.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all of the data, models, or code that support the findings of this study are available from the corresponding author on reasonable request [i.e., MATLAB code and all NMR data].
Acknowledgments
The authors want to acknowledge the financial support provided by the China National Key R&D Program during the 13th Five-year Plan Period (Grant No. 2016YFC0701004), the National Natural Science Foundation of China (Grant No. 51678441), the Science and Technology Commission of Shanghai Municipality (Grant Nos. 19DZ1202702 and 19DZ1201404), and the Key Science and Technology Foundation of Gansu Province (Grant No. 19YF3GA004). Gratitude is expressed for the support from the Shanghai Post-doctoral Excellence Program (2019–2020) and Visiting Scientist project in Darcy Center of TU/e (2019–2020), the “High-level Foreign Experts” project at Tongji University, and the China Scholarship Council. We would also like to thank Niumag Electric Corporation (Shanghai, China) for its assistance in performing these measurements.
References
Bligh, M. W., M. N. d’Eurydice, R. R. Lloyd, C. H. Arns, and T. D. Waite. 2016. “Investigation of early hydration dynamics and microstructural development in ordinary Portland cement using NMR relaxometry and isothermal calorimetry.” Cem. Concr. Res. 83 (May): 131–139. https://doi.org/10.1016/j.cemconres.2016.01.007.
Han, J. G., and K. J. Wang. 2016. “Influence of bleeding on properties and microstructure of fresh and hydrated Portland cement paste.” Constr. Build. Mater. 115 (Jul): 240–246. https://doi.org/10.1016/j.conbuildmat.2016.04.059.
Huang, H., and G. Ye. 2017. “Examining the ‘time-zero’ of autogenous shrinkage in high/ultra-high performance cement pastes.” Cem. Concr. Res. 97 (Jul): 107–114. https://doi.org/10.1016/j.cemconres.2017.03.010.
Ji, Y. L., L. Pel, and Z. P. Sun. 2019. “The microstructure development during bleeding of cement paste: An NMR study.” Cem. Concr. Res. 125 (Nov): 105866. https://doi.org/10.1016/j.cemconres.2019.105866.
Ji, Y. L., Z. P. Sun, X. X. Jiang, Y. Liu, L. L. Shui, and C. Chen. 2017. “Fractal characterization on pore structure and analysis of fluidity and bleeding of fresh cement paste based on low-field NMR.” Constr. Build. Mater. 140 (Jun): 445–453. https://doi.org/10.1016/j.conbuildmat.2017.02.151.
Ji, Y. L., Z. P. Sun, J. B. Yang, L. Pel, A. J. Raja, and H. S. Ge. 2020. “NMR study on bleeding properties of the fresh cement pastes mixed with polycarboxylate (PCE) superplasticizers.” Constr. Build. Mater. 240 (Apr): 117938. https://doi.org/10.1016/j.conbuildmat.2019.117938.
Ji, Y. L., Z. P. Sun, X. Yang, C. J. Li, and X. B. Tang. 2015. “Assessment and mechanism study of bleeding process in cement paste by low-field NMR.” Constr. Build. Mater. 100 (Dec): 255–261. https://doi.org/10.1016/j.conbuildmat.2015.09.062.
Josserand, L., O. Coussey, and F. Larrard. 2006. “Bleeding of concrete as an ageing consolidation process.” Cem. Conc. Res. 36 (9): 1603–1608. https://doi.org/10.1016/j.cemconres.2004.10.006.
Lei, L., and J. Plank. 2012. “A concept for a polycarboxylate superplasticizer possessing enhanced clay tolerance.” Cem. Concr. Res. 42 (10): 1299–1306. https://doi.org/10.1016/j.cemconres.2012.07.001.
Loh, C. K., T. S. Tan, T. S. Yong, and T. H. Wee. 1998. “An experimental study on bleeding and channelling of cement paste and mortar.” Adv. Cem. Res. 10 (1): 1–16. https://doi.org/10.1680/adcr.1998.10.1.1.
Massoussi, N., E. Keita, and N. Roussel. 2017. “The heterogeneous nature of bleeding in cement pastes.” Cem. Concr. Res. 95 (May): 108–116. https://doi.org/10.1016/j.cemconres.2017.02.012.
Morris, P. H., and P. F. Dux. 2010. “Analytical solutions for bleeding of concrete due to consolidation.” Cem. Concr. Res. 40 (10): 1531–1540. https://doi.org/10.1016/j.cemconres.2010.06.007.
Muller, A. C. A., K. L. Scrivener, A. M. Gajewicz, and P. J. McDonald. 2012. “Densification of C-S-H measured by NMR relaxometry.” J. Phys. Chem. C 117 (1): 403–412. https://doi.org/10.1021/jp3102964.
Peng, Y., and S. Jacobsen. 2013. “Influence of water/cement ratio, admixtures and filler on sedimentation and bleeding of cement paste.” Cem. Concr. Res. 54 (Dec): 133–142. https://doi.org/10.1016/j.cemconres.2013.09.003.
Slichter, C. P. 1989. Principles of magnetic resonance. Berlin: Springer.
Song, Y. Q., L. Venkataramanan, M. D. Hürlimann, M. Flaum, P. Frulla, and C. Straley. 2002. “ correlation spectra obtained using a fast two-dimensional Laplace inversion.” J. Magn. Reson. 154 (2): 261–268. https://doi.org/10.1006/jmre.2001.2474.
Tan, T. S., T. H. Wee, S. A. Tan, C. T. Tam, and S. L. Lee. 1987. “A consolidation model for bleeding of cement paste.” Adv. Cem. Res. 1 (1): 18–26. https://doi.org/10.1680/adcr.1987.1.1.18.
Tazawa, E., and S. Miyazawa. 1995. “Influence of cement and admixture on autogenous shrinkage of cement paste.” Cem. Concr. Res. 25 (2): 281–287. https://doi.org/10.1016/0008-8846(95)00010-0.
Ukpata, J. O., P. A. M. Basheer, and L. Black. 2019. “Slag hydration and chloride binding in slag cements exposed to a combined chloride-sulphate solution.” Constr. Build. Mater. 195 (Jan): 238–248. https://doi.org/10.1016/j.conbuildmat.2018.11.055.
Venkataramanan, L., Y. Q. Song, and M. D. Hürlimann. 2002. “Solving Fredholm integrals of the first kind with tensor product structure in 2 and 2.5 dimensions.” IEEE Trans. Signal Process. 50 (5): 1017–1026. https://doi.org/10.1109/78.995059.
Vlaardingerbroek, M. T., and J. A. Boer. 1996. “Magnetic resonance imaging.” In theory and practice. Berlin: Springer.
Wainwright, P. J., and H. A. Aider. 1995. “The influence of cement source and slag additions on the bleeding of concrete.” Cem. Concr. Res. 25 (7): 1445–1456. https://doi.org/10.1016/0008-8846(95)00139-4.
Yim, H. J., J. H. Kim, S. H. Han, and H. G. Kwak. 2015. “Influence of Portland cement and ground-granulated blast-furnace slag on bleeding of fresh mix.” Constr. Build. Mater. 80 (Apr): 132–140. https://doi.org/10.1016/j.conbuildmat.2014.12.051.
Yuan, R. Z. 1996. Science of cementitious materials. [In Chinese.] Wuhan, China: Press of Wuhan Univ. of Technology.
Information & Authors
Information
Published In
Copyright
© 2020 American Society of Civil Engineers.
History
Received: Jan 13, 2020
Accepted: Jun 2, 2020
Published online: Sep 21, 2020
Published in print: Dec 1, 2020
Discussion open until: Feb 21, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.