Behavior of Clayey Soil Reinforced with Polyethylene Terephthalate
Publication: Journal of Materials in Civil Engineering
Volume 31, Issue 10
Abstract
Every year millions of bottles of polyethylene terephthalate (PET) are discarded into the environment, when in fact these materials have a high potential to be recycled and/or beneficially reused. This study aims to evaluate the mechanical behavior of a clayey soil mixed with 10%, 20%, and 30% of fine crushed PET and with 3% and 5% of PET flakes. These new materials can possibly be used in myriad applications in geotechnical engineering. Triaxial tests at 50, 150, and 300 kPa confining stresses were performed to obtain the strength parameters of the soil-PET mixtures. The results show that, overall, the strength improvements of the mixtures were considerable; the friction angle had a substantial enhancement, while the cohesion slightly decreased with the addition of the PET. The soil strength parameters were highly influenced by the percentage of fine crushed PET and PET flakes added to the mixture. Improvements also depended on the confining level to which the samples were submitted. This new geotechnical material can be used in landfills, as well as for slopes stabilization and other geotechnical works, contributing to a better understanding and interpretation of the behavior of soil reinforced with PET material and giving an environmentally friendly end to this residue.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors wish to express their gratitude for the financial support from the Brazilian government, namely National Council for Scientific and Technological Development (CNPq), for the Productivity Research scholarship and Universal Research Project, and the Coordination for the Improvement of Higher Level or Education Personnel (CAPES) for providing the Master scholarship to develop this study.
References
ABIPET (Indústria do PET no Brasil). 1995. Associação Brasileira da Indústria do PET. [In Portuguese.] São Paulo, Brazil: ABIPET.
ABNT (Associação Brasileira de Normas Técnicas). 2004. Solid waste: Classification. [In Portuguese.]. Rio de Janeiro, Brazil: ABNT.
ABNT (Associação Brasileira de Normas Técnicas). 2016. Soil: Compaction test. [In Portuguese.]. Rio de Janeiro, Brazil: ABNT.
ASTM. 2012a. Standard test methods for laboratory compaction characteristics of soil using modified effort (56,000 (2,700)). ASTM D1557-12e1. West Conshohocken, PA: ASTM.
ASTM. 2012b. Standard test methods for laboratory compaction characteristics of soil using standard effort (12,400 ()). ASTM D698-12e2. West Conshohocken, PA: ASTM.
Casagrande, M. D. T., M. R. Coop, and N. C. Consoli. 2006. “Behavior of a fiber-reinforced bentonite at large shear displacements.” J. Geotech. Geoenviron. Eng. 132 (11): 1505–1508. https://doi.org/10.1061/(ASCE)1090-0241(2006)132:11(1505).
Casagrande, M. D. T., M. R. Coop, and N. C. Consoli. 2007. “Closure to ‘Behavior of a fiber-reinforced bentonite at large shear displacements’.” J. Geotech. Geoenviron. Eng. 133 (12): 1635–1636. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:12(1635).
Consoli, N. C., M. D. T. Casagrande, and M. R. Coop. 2005. “Effect of fiber reinforcement on the isotropic compression behavior of a sand.” J. Geotech. Geoenviron. Eng. 131 (11): 1434–1436. https://doi.org/10.1061/(ASCE)1090-0241(2005)131:11(1434).
Consoli, N. C., M. D. T. Casagrande, and M. R. Coop. 2007a. “Performance of a fibre-reinforced sand at large shear strains.” Geotech. 57 (9): 751–756. https://doi.org/10.1680/geot.2007.57.9.751.
Consoli, N. C., M. D. T. Casagrande, K. S. Heineck, and M. R. Coop. 2007b. “Shear strength behavior of fiber-reinforced sand considering triaxial tests under distinct stress paths.” J. Geotech. Geoenviron. Eng. 133 (11): 1466–1469. https://doi.org/10.1061/(ASCE)1090-0241(2007)133:11(1466).
Consoli, N. C., M. D. T. Casagrande, P. D. M. Prietto, and A. Thome. 2003. “Plate load test on fiber-reinforced soil.” J. Geotech. Geoenviron. Eng. 129 (10): 951–955. https://doi.org/10.1061/(ASCE)1090-0241(2003)129:10(951.
Consoli, N. C., M. D. T. Casagrande, A. Thome, F. D. Rosa, and M. Fahey. 2009. “Effect of relative density on plate tests on fibre-reinforced sand.” Geotech. 59 (5): 471–476. https://doi.org/10.1680/geot.2007.00063.
Consoli, N. C., S. Marques, N. C. Sampa, M. S. Bortolotto, A. T. Siacara, H. P. Nierwinski, F. Pereira, and L. Festugato. 2017. “A general relationship to estimate strength of fibre-reinforced cemented fine-grained soils.” Geosynthetics Int. 24 (4): 435–441. https://doi.org/10.1680/jgein.17.00006.
Gray, D. H., and T. Al-Refeai. 1986. “Behavior of fabric-versus fiber-reinforced sand.” J. Geotech. Eng. 112 (8): 804–820. https://doi.org/10.1061/(ASCE)0733-9410(1986)112:8(804).
Gray, D. H., and H. Ohashi. 1983. “Mechanics of fiber reinforcement in sand.” J. Geotech. Eng. 109 (3): 335–353. https://doi.org/10.1061/(ASCE)0733-9410(1983)109:3(335).
Head, K. H. 1986. Vol. 3 of Manual of soil laboratory testing: Effective stress test. 2nd ed., 227. West Sussex, UK: Wiley.
Ling, H. I., D. Leshchinsky, and Y. Mohri. 2007. “Behavior of a large-scale modular-block reinforced soil retaining wall subject to Kobe earthquake shaking.” In Proc., 4th Int. Conf. on Earthquake Geotechnical Engineering. Thessaloniki, Greece: Aristotle Univ. of Thessaloniki.
Lopes, L. S. E., P. V. Oliveira, M. D. T. Casagrande, and L. M. G. Motta. 2012. “Availability of resilient modulus and permanent deformation laboratory tests of stabilized soil with coal ashes for pavements base.” Key Eng. Mater. 517: 570–576. https://doi.org/10.4028/www.scientific.net/KEM.517.570.
Maher, M. H., and Y. C. Ho. 1994. “Mechanical properties of kaolinite/fiber soil composite.” J. Geotech. Eng. 120 (8): 1381–1393. https://doi.org/10.1061/(ASCE)0733-9410(1994)120:8(1381).
Marinho, F. A. M. 1986. “Características de deformabilidade do solo residual do Campo Experimental II da PUC/RJ obtidas a partir de ensaios triaxiais axissimétricos.” [In Portuguese] Master dissertation, Departamento de Engenharia Civil e Ambiental, Pontifical Catholic Univ. of Rio de Janeiro.
Mcgown, A., K. Z. Andrawes, N. Hytiris, and F. B. Mercer. 1988. “Soil strengthening using randomly distributed mesh elements.” In Vol. 3 of Proc., Int. Conf. on Soil Mechanics and Foundation Engineering, 1735–1738. São Francisco, CA. Washington, DC: Transportation Research Board.
Melo, J. W. 2004. “Produção e caracterização de pó de PET—Poli (tereftalato de etileno), obtido a partir de garrafas pós-consumo.” [In Portuguese.] Master dissertation, Rede Temática em Engenharia de Materiais. Universidade Federal de Ouro Preto—CETEC.
NAPCOR (National Association for PET Container Resources). n.d. Accessed January 20, 2016. http://www.napcor.com/.
Ramirez, G. G. D., and M. D. T. Casagrande. 2014. “Experimental study of granular rubber waste tire reinforced soil for geotechnical applications.” Key Eng. Mater. 600: 585–596. https://doi.org/10.4028/www.scientific.net/KEM.600.585.
Romão, W., M. A. S. Spinacé, and M. A. De Paoli. 2009. “Poli(tereftalato de etileno), PET: Uma revisão sobre os processos de síntese, mecanismo de degradação e sua reciclagem.” [In Portuguese.] Polímeros: Ciência e Tecnologia 19 (2): 121–132. https://doi.org/10.1590/S0104-14282009000200009.
Santoni, R. L., J. S. Tingle, and S. L. Webster. 2001. “Engineering properties of sand-fiber mixtures for road construction.” J. Geotech. Geoenviron. Eng. 127 (3): 258–268. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:3(258).
Senez, P. C., and M. D. T. Casagrande. 2017. “Evaluation of load-settlement behavior of a polyethylene terephthalate (PET) fibers reinforced sand under plate load tests.” In Proc., 19th ICSMGE—Int. Conf. on Soil Mechanics and Geotechnical Engineering. London: International Society for Soil Mechanics and Geotechnical Engineering.
Silveira, M. V., A. V. Calheiros, and M. D. T. Casagrande. 2018. “Applicability of the expanded polystyrene as a soil improvement tool.” J. Mater. Civ. Eng. 30 (6): 06018006. https://doi.org/10.1061/(ASCE)MT.1943-5533.0002276.
Skempton, A. W. 1954. “The pore-pressure coefficients A and B.” Geotech. 4 (4): 143–147. https://doi.org/10.1680/geot.1954.4.4.143.
Sotomayor, J. M. G., and M. D. T. Casagrande. 2018. “The performance of a sand reinforced with coconut fibers through plate load tests on a true scale physical model.” Soils Rocks 41 (3): 361–368. https://doi.org/10.28927/SR.413361.
Velloso, R. Q., M. D. T. Casagrande, E. A. Vargas Junior, and N. C. Consoli. 2012. “Simulation of the mechanical behavior of fiber reinforced sand using the discrete element method.” Soils Rocks 35 (2): 201–206.
Vizcarra, G. O. C., M. D. T. Casagrande, and L. M. G. Motta. 2013. “Applicability of municipal solid waste incineration ash on base layers of pavements.” J. Mater. Civ. Eng. 26 (6): 06014005. https://doi.org/10.1061/(ASCE)MT.1943-5533.0000903.
Zornberg, J. G., A. R. Cabral, and C. Viratjandr. 2004. “Behaviour of tire shred-sand mixtures.” Can. Geotech. J. 41 (2): 227–241. https://doi.org/10.1139/t03-086.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: May 31, 2017
Accepted: Apr 11, 2019
Published online: Jul 24, 2019
Published in print: Oct 1, 2019
Discussion open until: Dec 24, 2019
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.