Factors Influencing the Rheology of Fresh Cement Asphalt Emulsion Paste
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 11
Abstract
Cement asphalt emulsion paste (CA paste) is known to be a low-yield stress suspension suitable for many applications in which high flowability is desired. The factors that lead to the low yield stress of CA paste are still unknown, however. The effect of the components in CA paste on the rheology of fresh CA paste is studied to reveal the primary factors that lead to the low yield stress. The effect of emulsifier and superplasticizer on cement paste, the effect of asphalt emulsion, and viscosity modifying agents on CA paste are studied. Results indicate that emulsifier can reduce the yield stress and apparent viscosity of cement paste, but the effect of emulsifier is small compared to the effect of the superplasticizer. The low yield stress of CA pastes is primarily because of the combined effect of superplasticizer and asphalt emulsion. Both CA paste without superplasticizer and cement paste have high yield stress. Viscosity modifying agents can significantly increase yield stress of CA paste without changing minimum apparent viscosity, which is an efficient way to change the rheological behavior of CA paste with low yield stress.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The first author acknowledges the support of fundamental research fund from Dalian University of Technology (DUT15RC(3)083).
References
Barnes, H. A. (1989). “Shear-thickening ‘dilatancy’ in suspensions of nonaggregating solid particles dispersed in Newtonian liquids.” J. Rheol., 33(2), 329–366.
Bouvet, A., Ghorbel, E., and Bennacer, R. (2010). “The mini-conical slump flow test: Analysis and numerical study.” Cem. Concr. Res., 40(10), 1517–1523.
Chinese Railway Specification. (2008). “Technical specification of CA mortar for CRTSII nonballast slab track.” Beijing.
Chong, J. S., Christiansen, E. B., and Baer, A. D. (1971). “Rheology of concentrated suspensions.” J. Appl. Polym. Sci., 15(8), 2007–2021.
Cremonesi, M., Ferrara, L., Frangi, A., and Perego, U. (2010). “Simulation of the flow of fresh cement suspensions by a Lagrangian finite element approach.” J. Non-Newton. Fluid., 165(23–24), 1555–1563.
Ferrara, L., Cremonesi, M., Tregger, N., Frangi, A., and Shah, S. P. (2012). “On the identification of rheological prperties of cement suspensions: Rheometry, computational fluid dynamics modeling and field test measurements.” Cem. Concr. Res., 42(8), 1134–1146.
Hu, S., Wang, T., Wang, F., and Liu, Z. (2009). “Adsorption behaviour between cement and asphalt emulsion in CA mortar.” Adv. Cem. Res., 21(1), 11–14.
James, A. (2006). “Overview of asphalt emulsions.”, Transportation Research Circular.
Liu, D. M. (2000). “Particle packing and rheological property of highly-concentrated ceramic suspensions: determination and viscosity prediction.” J. Mater. Sci., 35(21), 5503–5507.
Nehdi, M., and Rahman, M. A. (2004). “Estimating rheological properties of cement pastes using various rheological models for different test geometry, gap and surface friction.” Cem. Concr. Res., 34(11), 1993–2007.
Ouyang, J., and Tan, Y. (2015a). “Rheology of fresh cement asphalt emulsion pastes.” Constr. Build. Mater., 80, 236–243.
Ouyang, J., Tan, Y., Li, Y., and Zhao, J. (2015b). “Demulsification process of asphalt emulsion in fresh cement-asphalt emulsion paste.” Mater. Struct., 48(12), 3875–3883.
Peng, J., Deng, D., Yuan, Q., Liu, Z., and Fang, L. (2014). “Study of the rheological behavior of fresh cement emulsified asphalt paste.” Constr. Build. Mater., 66, 348–355.
Phan, T. H., Chaouche, M., and Moranville, M. (2006). “Influence of organic admixtures on the rheological behaviour of cement pastes.” Cem. Concr. Res., 36(10), 1807–1813.
Pouliot, N., Jacques, M., and Pigeon, M. (2003). “Hydration mechanisms, microstructure, and mechanical properties of mortars prepared with mixed binder cement slurry-asphalt emulsion.” J. Mater. Civ. Eng., 54–59.
Roussel, N. (2006). “A theoretical frame to study stability of fresh concrete.” Mater. Struct., 39(1), 75–83.
Saak, A. W., Jennings, H. M., and Shah, S. P. (2001). “New methodology for designing self-compacting concrete.” ACI. Mater. J., 98(6), 429–439.
Tan, Y., Ouyang, J., and Li, Y. (2014). “Factors influencing rheological properties of fresh cement asphalt emulsion paste.” Constr. Build. Mater., 68, 611–617.
Tan, Y., Ouyang, J., Lv, J., and Li, Y. (2013). “Effect of emulsifier on cement hydration in cement asphalt mortar.” Constr. Build. Mater., 47, 159–164.
Tregger, N., Ferrara, L., and Shah, S. P. (2008). “Identifying cement rheological properties from the mini-slump flow test.” ACI. Mater. J., 105(6), 556–558.
Tregger, N., Gregori, A., Ferrara, L., and Shah, S. (2012). “Correlating dynamic segregation of self-consolidating concrete to the slump-flow test.” Constr. Build. Mater., 28(1), 499–505.
Wang, F., Liu, Y., and Hu, S. (2013). “Effect of early cement hydration on the chemical stability of asphalt emulsion.” Constr. Build. Mater., 42, 146–151.
Yang, J., Yan, P., Kong, X., and Li, X. (2010). “Study on the hardening mechanism of cement asphalt binder.” Sci. China, 53(5), 1406–1412.
Zhang, Y., Kong, X., Hou, S., Liu, Y., and Han, S. (2012). “Study on the rheological properties of fresh cement asphalt paste.” Constr. Build. Mater., 27(1), 534–544.
Information & Authors
Information
Published In
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Sep 28, 2015
Accepted: Mar 28, 2016
Published online: Jun 17, 2016
Published in print: Nov 1, 2016
Discussion open until: Nov 17, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.