Development of Predictive Models for Low-Temperature Indirect Tensile Strength of Asphalt Mixtures
Publication: Journal of Materials in Civil Engineering
Volume 28, Issue 11
Abstract
Thermal cracking is the predominant flexible pavement distress in northern climates, causing transverse cracks perpendicular to the direction of traffic. The indirect tensile (IDT) strength test is currently the most widely used method to characterize thermal cracking susceptibility and is required in mechanistic empirical pavement design. When laboratory IDT strength testing data are not available, it is predicted by pavement design software using mixture volumetrics and Superpave performance grade (PG) of the binder. The primary purpose of this study was to examine the IDT strength characteristics of asphalt mixtures commonly used by the Michigan Department of Transportation (MDOT) and to develop improved prediction methods for IDT strength. Laboratory testing of 62 unique MDOT mixtures (a total of 201 samples with replicates) showed that the pavement design software predicted the IDT strength very poorly. Three models were developed to improve the accuracy of IDT strength prediction. First, the current software’s predictive equation for IDT strength was locally calibrated. Then, an improved statistical model was developed to predict low-temperature IDT strength, based on the information typically available in job mix formulas. Finally, an artificial neural network (ANN)–based model was developed to further improve the accuracy of the low-temperature strength predictions using information from job mix formulas. All three models showed increased prediction performance when compared with the software’s IDT strength prediction.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to thank the Michigan Department of Transportation for their financial support of this study. In addition, the efforts of and the comments made by the MDOT research advisory panel members (Michael Eacker, Curtis Bleech, Justin Schenkel, Nathan Maack, Pat Schafer, John Barak, David Hoeh, Jim Siler, Greg Bills, Tom Hynes, John Belcher, and Andre Clover) and the MSU research team (Neeraj Buch, Karim Chatti, Syed Haider, and Gilbert Baladi) are sincerely appreciated.
References
AASHTO. (2011a). “Preparation of cylindrical performance test specimens using the superpave gyratory compactor (SGC).”, Washington, DC.
AASHTO. (2011b). “Standard method of test for determining bulk specific gravity of compacted hot mix asphalt using saturated surface‑dry specimens.” AASHTO T166-11, Washington, DC.
AASHTO. (2011c). “Standard method of test for determining the creep compliance and strength of hot-mix asphalt (HMA) using the indirect tensile test device.” AASHTO T322-07, Washington, DC.
Adeli, H. (2001). “Neural networks in civil engineering: 1989–2000.” Comput. -Aided Civ. Infrastruct. Eng., 16(2), 126–142.
ARA (Advanced Research Associates). (2004). “Design guide: Design of new and rehabilitated pavement structures.”, National Cooperative Highway Research Program, National Research Council, Washington, DC.
Buttlar, W., and Roque, R. (1992). “The development of a measurement and analysis system to accurately determine asphalt concrete properties using the indirect tensile mode.” J. Assoc. Asphalt Paving Technol., 61, 304–332.
Buttlar, W., and Roque, R. (1994). “Development and evaluation of the strategic highway research program measurement and analysis system for indirect tensile testing at low temperatures.” Transp. Res. Rec., 1454, 163–171.
Ceylan, H., Kasthurirangan, G., and Lytton, R. (2010). “Neural networks modeling of stress growth in asphalt overlays due to load and thermal effects during reflection cracking.” J. Mater. Civ. Eng., 221–229.
Choi, J., Adams, T. M., and Bahia, H. U. (2004). “Pavement roughness modeling using back-propagation neural networks.” Comput. -Aided Civ. Infrastruct. Eng., 19(4), 295–303.
Christensen, D., and Bonaquist, R. (2004). “Evaluation of indirect tensile test (IDT) procedures for low-temperature performance of hot mix asphalt.”, Transportation Research Board, National Research Council, Washington, DC.
Demuth, H., and Beale, M. (2004). “Neural network toolbox for use with Matlab.” Mathworks, Natick, MA.
Fairbairn, E., and Ulm, J. (2002). “A tribute to Fernando LLB Carneiro (1913–2001) engineer and scientist who invented the Brazilian test.” Mater. Struct., 35(3), 195–196.
Gandhi, T., Xiao, F., and Amirkhanian, S. N. (2009). “Estimating indirect tensile strength of mixtures containing anti-striping agents using an artificial neural network approach.” Int. J. Pavement Res. Technol., 2(1), 475–483.
Gucunski, N., and Krstic, V. (1996). “Backcalculation of pavement profiles from spectral-analysis-of-surface-waves test by neural networks using individual receiver spacing approach.” Transp. Res. Rec., 1526, 6–13.
Hill, B., Behnia, B., Hakimzadeh, S., Buttlar, W. G., and Reis, H. (2012). “Evaluation of low-temperature cracking performance of warm-mix asphalt mixtures.” Transp. Res. Rec., 2294, 81–88.
Huang, B., Shu, X., and Vukosavljevic, D. (2011). “Laboratory investigation of cracking resistance of hot-mix asphalt field mixtures containing screened reclaimed asphalt pavement.” J. Mater. Civ. Eng., 1535–1543.
Huang, C., Najjar, Y. M., and Romanoschi, S. A. (2007). “Predicting asphalt concrete fatigue life using artificial neural network approach.” Transportation Research Board 86th Annual Meeting Compendium of Papers CD-ROM, Transportation Research Board, Washington, DC.
Kim, Y. R., and Wen, H. (2002). “Fracture work from indirect tension testing.” J. Assoc. Asphalt Paving Technol., 71, 779–793.
Li, X., Marasteanu, M., Kvasnak, A., Bausano, J., Williams, R., and Worel, B. (2010). “Factors study in low-temperature fracture resistance of asphalt concrete.” J. Mater. Civ. Eng., 145–152.
Marasteanu, M., Li, X., Clyne, T., Voller, V., Timm, D., and Newcomb, D. (2004). “Low temperature cracking of asphalt concrete pavements.”, Dept. of Civil Engineering, Univ. of Minnesota, Minneapolis.
SPSS Statistics 22 [Computer software]. IBM, Armonk, NY.
Tarefder, R., White, L., and Zaman, M. (2005). “Neural network model for asphalt concrete permeability.” J. Mater. Civ. Eng., 19–27.
Tutumluer, E., and Seyhan, U. (1998). “Neural network modeling of anisotropic aggregate behavior from repeated load triaxial tests.” Transp. Res. Rec., 1615, 86–93.
Wen, H. (2013). “Use of fracture work density obtained from indirect tensile testing for the mix design and development of a fatigue model.” Int. J. Pavement Eng., 14(6), 561–568.
Zborowski, A., and Kaloush, K. E. (2011). “A fracture energy approach to model the thermal cracking performance of asphalt rubber mixtures.” Road Mater. Pavement Des., 12(2), 377–395.
Information & Authors
Information
Published In
Journal of Materials in Civil Engineering
Volume 28 • Issue 11 • November 2016
Copyright
© 2016 American Society of Civil Engineers.
History
Received: Feb 10, 2015
Accepted: Mar 30, 2016
Published online: Jun 17, 2016
Published in print: Nov 1, 2016
Discussion open until: Nov 17, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.