Improvement of Hole Erosion Test and Results on Reference Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 139, Issue 2
Abstract
Understanding the factors that control the transport of soil particles detached by water is essential in predicting the contingency of internal and surface erosion of embankments during storms and floods. It is particularly useful to be able to evaluate the sensitivity of the available soils to erosion at an early stage of a project and the risk assessment of an existing earthwork. The presented study is based on laboratory tests with a hole erosion test apparatus and tries to characterize the internal erosion of soils. The test consists of eroding a drilled soil specimen by water flow with a constant pressure drop at the boundaries of the specimen while recording the flow rate and studying the hole enlargement. A new version of the apparatus with improved instruments and an interpretation method is proposed, estimating the erosion rate based on the turbidity of the outflow and independent of hydraulic charge. Several remolded kaolinite-sand mixtures are tested as reference soil textures, and the results are analyzed with the proposed and existing interpretation methods.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
We thank T. L. Pham and J. L. Tacita for valuable help with the test setups and experiments. I. Haghighi benefits from student financial support delivered by the IFSTTAR and the French Public Work Ministry. This work was partly financially supported by the French research program ANR ERINOH.
References
Arulanandan, K., Gillogley, E., and Tully, R. (1980). “Development of a quantitative method to predict critical shear stress and rate of erosion of natural undisturbed cohesive soils.” Technical Rep. GL-80-5, U.S. Army Engineers, Waterways Experiment Station, Vicksburg, MS.
ASTM. (2006). “Standard test method for identification and classification of dispersive clay soils by the pinhole test.” D4647, West Conshohocken, PA.
ASTM. (2007). “Standard test methods for laboratory compaction characteristics of soil using standard effort.” D698, West Conshohocken, PA.
ASTM. (2011). “Standard test method for dispersive characteristics of clay soil by double hydrometer.” D4221, West Conshohocken, PA.
Benahmed, N., and Bonelli, S. (2007). “Etude expérimentale de l’érosion interne d’une kaolinite.” Proc., 25e rencontre de l’AUGC, Bordeaux, France (in French).
Bendahmane, F., Marot, D., and Alexis, A. (2008). “Experimental parametric study of suffusion and backward erosion.” J. Geotech. Geoenviron. Eng., 134(1), 57–67.
Bendahmane, F., Marot, D., Rosquoët, F., and Alexis, A. (2006). “Characterization of internal erosion in sand kaolin soils.” Eur. J. Environ. Civil Eng., 10(4), 505–520.
Blais, J.-P. (2004). “Typologie de l’érosion interne et érosion interne des digues fluviales, Une courte revue bibliographique.” Proc., Colloque technique sur la sécurité des digues fluviales et de navigation, Orléans, France, 65–70 (in French).
Briaud, J.-L. (2008). “Case histories in soil and rock erosion: Woodrow Wilson Bridge, Brazos River Meander, Normandy Cliffs, and New Orleans Levees.” J. Geotech. Geoenviron. Eng., 134(10), 1424–1447.
Briaud, J.-L., et al. (2001). “Erosion function apparatus for scour rate predictions.” J. Geotech. Geoenviron. Eng., 127(2), 105–113.
Bonelli, S., and Brivois, O. (2008). “The scaling law in the hole erosion test with a constant pressure drop.” Int. J. Numer. Anal. Methods Geomech., 32(13), 1573–1595.
Bonelli, S., Brivois, O., Borghi, R., and Benahmed, N. (2006). “On the modelling of piping erosion.” C. R. Mécanique, 334(8–9), 555–559.
Boussaid, K., Ferber, V., Garnier, J., and Thorel, L. (2003). “Intermediate soils for physical modelling.” Geotechnical Measurements and Modelling, O. Natau, E. Fecker, and E. Pimentel, eds., Swets & Zeitlinger, Lisse, Germany, 435–440.
Chapuis, R. P. (1986). “Use of rotational erosion device on cohesive soils.” Transp. Res. Rec., 1089, 23–28.
Chapuis, R. P., and Gatien, T. (1986). “An improved rotating cylinder technique for quantitative measurements of the scour resistance of clays.” Can. Geotech. J., 23(1), 83–87.
Chevalier, C., Haghighi, I., Pham, T. L., and Reiffsteck, P. (2010). “Two complementary tests for characterizing the soil erosion.” Proc., 5th Int. Conf. Scour Eros., ASCE, Reston, VA, 152–161.
Fell, R., and Fry, J.-J. (2007). Internal erosion of dams and their foundations, Taylor & Francis, London.
Foster, M., Fell, R., and Spannagle, M. (2000). “The statistics of embankment dam failures and accidents.” Can. Geotech. J., 37(5), 1000–1024.
Fry, J. J., Degoutte, G., Goubet, A., (1997). “L’érosion interne: Typologie, détection et réparation.” Barrag. Reserv., 6, 126 (in French).
Guiton, M. (1998). “Ruissellement et risque majeur, phénomènes, exemples et gestion spatiale des crues.” Études et recherches des LPC Série Environnement et Génie Urbain, EG13 (in French).
Hanson, G. J. (1991). “Development of a jet index to characterize erosion resistance of soils in earthen spillways.” Trans. ASAE, 34(5), 2015–2020.
ISO. (2002). “Geotechnical investigation and testing, identification and classification of soil, Part 1: Identification and description.” ISO 14688-1, Geneva.
ISO. (2004). “Geotechnical investigation and testing, identification and classification of soil, Part 2: Principles for a classification.” ISO 14688-2.
Lane, E. W. (1935). “Security from underseepage: Masonary dams on earth foundations.” Trans. Am. Soc. Civ. Eng., 100(1919), 1235–1272.
Monnet, A. (1998). “Boulance, érosion interne, renard. Les instabilités sous écoulement.” Rev. Franç. Géotech., 82, 3–10.
Moody, L. F. (1944). “Friction factors for pipe flow.” ASME Trans., 66, 671–684.
Pham, T. L. (2008). “Erosion et dispersion des sols argileux par un fluide.” Ph.D. thesis, Ecole Nationale des Ponts et Chaussées, Paris (in French).
Reddi, L. N., Lee, I., and Bonala, M. V. S. (2000). “Comparison of internal and surface erosion using flow pump test on a sand-Kaolin mixture.” Geotech. Test. J., 23(1), 116–122.
Reiffsteck, P. (2007). “Evaluation of erosion of soil used in dykes and earth embankments which are subjected to flood.” Workshop Int. Eros. Piping Dams Found., Lavoisier, Aussois, France, 191–202.
Reiffsteck, P., Pham, T. L., and Vargas, R., and Paihua, S. (2006). “Comparative study of superficial and internal erosion tests.” Proc., 3rd Int. Conf. Scour Eros., CURNET, Gouda, Netherlands, 571–575.
Sanchez, R. L., Strutynsky, A. I., and Silver, M. L. (1983). “Evaluation of the erosion potential of embankment core materials using the laboratory triaxial erosion test procedure.” Technical Rep. GL-83-4, U.S. Army Engineers, Waterways Experiment Station, Vicksburg, MS.
Shan, H., Wagner, A., Kerenyi, K., Guo, J., and Xie, Z. (2011). “An ex-situ scour testing device for erosion research of cohesive soils.” Proc., Eng. Mech. Instit. 2011 Conf., Northeastern Univ., Boston, 1020–1027.
Skempton, A. W., and Brogan, J. M. (1994). “Experiments on piping in sandy gravels.” Geotechnique, 44(3), 440–460.
Soudain, M. (2004). “Come rain, come shine.” Geotech. Transport. Ground Eng., 37(6), 14–15
Terzaghi, K. (1943). Theoretical soil mechanics, Wiley, New York.
Volk, G. M. (1937). “Method of determination of the degree of dispersion of the clay fraction of soils.” Proc., Soil Sci. Soc. Am., 2, 432–445.
Wan, C. F., and Fell, R. (2002). “Investigation of internal erosion and piping of soils in embankment dams by the slot erosion test and the hole erosion test.” UNICIV Rep. No. R-412, School of Civil and Environmental Engineering, Univ. of New South Wales, Kensington, Australia.
Wan, C. F., and Fell, R. (2004). “Investigation of rate of erosion of soils in embankment dams.” J. Geotech. Geoenviron. Eng., 130(4), 373–380.
White, F. M. (1999). Fluid mechanics, McGraw Hill, New York.
Yang, S., Lacasse, S., and Sandven, R. (2005). “Determination of the transitional fines content of mixtures of sand and non-plastic fines.” Geotech. Test. J., 29(2), 102–107.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Sep 1, 2011
Accepted: Apr 16, 2012
Published online: Apr 18, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.