Probabilistic Porous Model to Simulate the Retention Curve of Soils
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 139, Issue 2
Abstract
A probabilistic porous model is used to simulate the retention curves of different types of soils. The model is based on the same principles of porous networks models; however, it shows important advantages over them. It considers two different elements: the sites and the bonds. It is able to simulate the retention curves of a material when its pore size distribution is known. It can also be used to interpret more realistically the results of mercury intrusion porosimetry tests. In this paper, the model is used to obtain the pore size distribution of different soils using the retention curve as its data source. The comparison between numerical and experimental results for different soils shows that the model approximately reproduces the pore size distribution obtained from mercury intrusion porosimetry tests.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors herein would like to thank Silvia C. Stroet for assistance in revising the English content of this paper.
References
Abell, A. B., Willis, K. L., and Lange, D. A. (1999). “Mercury intrusion porosimetry and image analysis of cement-based materials.” J. Colloid Interface Sci., 211(1), 39–44.
Alonso, E. E., Rojas, E., and Pinyol, N. M. (2008). “Unsaturated soil mechanics.” Reunión Nacional de Mecánica de Suelos, Vol. 117–205, Especial, Aguascalientes, Mexico.
Androutsopoulos, G. P., and Mann, R. (1979). “Evaluation of mercury porosimeter experiments using a network pore structure model.” Chem. Eng. Sci., 34(10), 1203–1212.
Arya, L. M., and Dierolf, T. S. (1992). “Predicting soil moisture characteristics from particle size distributions: An improved method to calculate pore radii from particle radii.” Proc., Int. Workshop Indirect Meth. Estim. Hydraulic Prop. Unsat. Soils, Univ. of California at Riverside, Riverside, CA, 115–124.
Arya, L. M., and Paris, J. F. (1981). “Physicoempirical model to predict the soil moisture characteristic from particle-size distribution and bulk density.” Soil Sci. Soc. Am. J., 45(6), 1023–1030.
Aubertin, M., Richard, J. F., and Chapuis, R. P. (1998). “A predictive model for the water retention curve: Applications to tailings from hard-rock mines.” Can. Geotech. J., 35(1), 55–69.
Basile, A., and D’Urso, G. (1997). “Experimental corrections of simplified methods for predicting water retention curves in clay-loamy soils from particle size determination.” Soil Technol., 10(3), 261–272.
Bear, J. (1979). Hydraulics of groundwater, McGraw Hill, NY.
Dullien, F. A. L. (1992). Porous media, fluid transport and pore structure, Academic Press, NY.
Dullien, F. A. L., and Mehta, P. N. (1972). “Particle size and pore (void) size distribution determination by photomicrographic methods.” Powder Technol., 5(3), 179–193.
Everet, D. H. (1967). The solid-gas interface. E. A. Flood, ed. Marcel Dekker, New York, 1005–1010.
Fredlund, M. D., Fredlund, D. G., and Wilson, G. W. (2002). “Use of the grain-size distribution for the estimation of the soil-water characteristic curve.” Can. Geotech. J., 39(5), 1103–1117.
Fredlund, D. W., and Xing, A. (1994). “Equations for the soil-water characteristic curve.” Can. Geotech. J., 31(1), 533–546.
Haines, W. B. (1927). “Studies in the physical properties of soils. IV. Further contribution to the theory of capillary phenomena in soil.” J. Agric. Sci., 17(18–2), 264–290.
Haines, W. B. (1930). “Studies in the physical properties of soils. V. The hysteresis effect in capillary properties and the modes of moisture distribution associated therewith.” J. Agric. Sci., 20(7–2), 97–116.
Mbagwu, J. S. C., and Mbah, C. N. (1998). “Estimating water retention and availability in Nigerian soils from their saturation percentage.” Commun. Soil Sci. Plant Anal., 29(7–8), 913–922.
Phoon, K.-K., Santoso, A., and Quek, S.-T. (2010). “Probabilistic analysis of soil-water characteristic curve.” J. Geotech. Geoenviron. Eng., 136(3), 445–455.
Prapaharan, S., Altschaeffl, A. G., and Dempsey, B. J. (1985). “Moisture curve of compacted clay: Mercury intrusion method.” J. Geotech. Eng., 111(9), 1139–1143.
Roels, S., Elsen, J., Cermeliet, J., and Hens, H. (2001). “Characterization of pore structure by combining mercury porosimetry and micrography.” Mater. Struct., 34(3), 76–82.
Sawangsuriya, A., Edil, T. B., and Bosscher, P. J. (2009). “Modulus-suction-moisture relationship for compacted soils in postcompaction state.” J. Geotech. Geoenviron. Eng., 135(9), 1390–1403.
Sheng, D., Sloan, S. W., and Gens, A. (2004). “A constitutive model for unsaturated soils: Thermomechanical and computational aspects.” Comput. Mech., 33(6), 453–465.
Simms, P. H., and Yanful, E. K. (2002). “Predicting soil-water characteristic curves of compacted plastic soils from measured pore-size distributions.” Geotechnique, 52(4), 269–278.
Simms, P. H., and Yanful, E. K. (2005). “A pore network model for hydromechanical coupling in unsaturated compacted clayey soils.” Can. Geotech. J., 42(2), 499–514.
Tamagnini, R. (2004). “An extended Cam-clay model for unsaturated soils with hydraulic hysteresis.” Geotechnique, 54(3), 223–228.
van Genuchten, M. T. (1980). “A closed form equation for predicting the hydraulic conductivity of unsaturated soils.” Soil Sci. Soc. Am. J., 44(5), 892–898.
Vesga, L. F. (2008). “Equivalent effective stress and compressibility of unsaturated kaolinite clay subjected to drying.” J. Geotech. Geoenviron. Eng., 134(3), 366–378.
Wheeler, S. J., Sharma, R. S., and Buison, M. S. R. (2003). “Coupling hydraulic hysteresis and stress-strain behavior in unsaturated soils.” Geotechnique, 53(1), 41–54.
Zhang, L. M., and Li, X. (2010). “Microporosity structure of coarse granular soils.” J. Geotech. Geoenviron. Eng., 136(10), 1425–1436.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 27, 2010
Accepted: May 1, 2012
Published online: May 3, 2012
Published in print: Feb 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.