Effects of Wall Movements on Performance of Integral Abutment Bridges
Publication: International Journal of Geomechanics
Volume 20, Issue 2
Abstract
Abutment walls in integral abutment bridges (IABs) move in a cyclic pattern in response to temperature-induced expansion and/or contraction of the bridge superstructure. The repetitive abutment movements cause an active-wedge slumping and passive-wedge densification of the retained backfill in the vicinity of the wall. These effects develop progressively with the number of abutment movements and eventually result in escalation of lateral soil pressure acting on the wall in addition to settlement in the approach adjacent to the wall. This paper investigated and gained further insight into the aforementioned effects on the performance of the integral abutments by means of numerical and experimental studies of an abutment wall retaining soil backfill and subjected to passive and active horizontal displacements. This paper also examined the application of expanded polystyrene (EPS) geofoam as a fill material to alleviate the lateral earth pressure ratcheting and the soil settlement in the IAB approaches.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the present study appear in the published article.
References
AbdelSalam, S. S., S. A. Azzam, and B. M. Fakhry. 2017. “Reliability and 3D modeling of flexible walls with EPS inclusion.” Int. J. Geomech. 17 (7): 04016153. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000853.
Alampalli, S., and A. Yannotti. 1998. “In-service performance of integral bridges and jointless decks.” Transp. Res. Rec. 1624 (1): 1–7. https://doi.org/10.3141/1624-01.
Alqarawi, A. S., C. J. Leo, D. S. Liyanapathirana, and S. D. Ekanayake. 2016. “A study on the effects of abutment cyclic movements on the approach of integral abutment bridges.” Aust. Geomech. J. 51 (2): 1–3. https://doi.org/10.4992/jjpsy.32.381.
Arsoy, S., R. M. Barker, and J. M. Duncan. 1999. Vol. 3 of The behavior of integral abutment bridges, 13. Charlottesville, VA: Virginia Transportation Research Council.
Bathurst, R. J., S. Zarnani, and A. Gaskin. 2007. “Shaking table testing of geofoam seismic buffers.” Soil Dyn. Earthquake Eng. 27 (4): 324–332. https://doi.org/10.1016/j.soildyn.2006.08.003.
Bloodworth, A. G., M. Xu, J. R. Banks, and C. R. Clayton. 2012. “Predicting the earth pressure on integral bridge abutments.” J. Bridge Eng. 17 (2): 371–381. https://doi.org/10.1061/(ASCE)BE.1943-5592.0000263.
Broms, B. B., and I. Ingelson. 1971. “Earth pressure against the abutments of a rigid frame bridge.” Geotechnique 21 (1): 15–28. https://doi.org/10.1680/geot.1971.21.1.15.
Cosgrove, E., and B. M. Lehane. 2003. “Cyclic loading of loose backfill placed adjacent to integral bridge abutments.” Int. J. Phys. Modell. Geotech. 3 (3): 9–16. https://doi.org/10.1680/ijpmg.2003.030302.
Deng, A., and Y. Xiao. 2010. “Measuring and modeling proportion-dependent stress-strain behavior of EPS-sand mixture.” Int. J. Geomech. 10 (6): 214–222. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000062.
Dicleli, M. 2000. “Simplified model for computer-aided analysis of integral bridges.” J. Bridge Eng. 5 (3): 240–248. https://doi.org/10.1061/(ASCE)1084-0702(2000)5:3(240).
England, G. L., D. I. Bush, and N. C. Tsang. 2000. Integral bridges: A fundamental approach to the time-temperature loading problem. London: Thomas Telford.
Faraji, S., J. M. Ting, D. S. Crovo, and H. Ernst. 2001. “Nonlinear analysis of integral bridges: Finite-element model.” J. Geotech. Geoenviron. Eng. 127 (5): 454–461. https://doi.org/10.1061/(ASCE)1090-0241(2001)127:5(454).
Frosch, R. J., and M. D. Lovell. 2011. Long-term behavior of integral abutment bridges.. West Lafayette, IN: Purdue Univ.
Ghadimi, B., H. Nikraz, and M. Rosano. 2016. “Dynamic simulation of a flexible pavement layers considering shakedown effects and soil-asphalt interaction.” Transp. Geotech. 7 (Jun): 40–58. https://doi.org/10.1016/j.trgeo.2016.04.003.
Greimann, L. F., P. S. Yang, and A. M. Wolde-Tinsae. 1986. “Nonlinear analysis of integral abutment bridges.” J. Struct. Eng. 112 (10): 2263–2280. https://doi.org/10.1061/(ASCE)0733-9445(1986)112:10(2263).
Hoppe, E., K. Weakley, and P. Thompson. 2016. “Jointless bridge design at the Virginia Department of Transportation.” Transp. Res. Procedia 14: 3943–3952.
Hoppe, E. J., and J. P. Gomez. 1996. Field study of an integral back wall bridge.. Charlottesville, VA: Virginia Transportation Research Council.
Horvath, J. S. 2000. Integral-abutment bridges: Problems and innovative solutions using EPS geofoam and other geosynthetics. New York: Manhattan College.
Huntley, S. A., and A. J. Valsangkar. 2013. “Field monitoring of earth pressures on integral bridge abutments.” Can. Geotech. J. 50 (8): 841–857. https://doi.org/10.1139/cgj-2012-0440.
Jacky, J. 1944. “The coefficient of earth pressure at rest.” [In Hungarian.] J. Soc. Hung. Architects Eng. 78 (22): 355–358.
Jamsawang, P., P. Voottipruex, P. Jongpradist, and D. T. Bergado. 2015. “Parameters affecting the lateral movements of compound deep cement mixing walls by numerical simulations and parametric analyses.” Acta Geotech. 10 (6): 797–812.
Keller, G. R. 2008. “Use of geosynthetic reinforced soil (GRS) for bridge abutments.” In Proc., 23rd ARRB Conf. 2008. Vermont South, Australia: Australian Road Research Board.
Khodair, Y., and S. Hassiotis. 2013. “Numerical and experimental analyses of an integral bridge.” Int. J. Adv. Struct. Eng. 5 (1): 14.
Kim, W., and J. A. Laman. 2010. “Numerical analysis method for long-term behavior of integral abutment bridges.” Eng. Struct. 32 (8): 2247–2257.
Lawver, A., C. French, and C. Shield. 2000. “Field performance of integral abutment bridge.” Transp. Res. Rec. 1740 (1): 108–117. https://doi.org/10.3141/1740-14.
Lehane, B. M. 2011. “Lateral soil stiffness adjacent to deep integral bridge abutments.” Géotechnique 61 (7): 593–603. https://doi.org/10.1680/geot.9.P.135.
Lock, R. J. 2002. Integral bridge abutments. Cambridge, UK: Schofield Centre.
Ng, C. W., S. M. Springman, and A. R. Norrish. 1998. “Centrifuge modelling of spread-base integral bridge abutments.” J. Geotech. Geoenviron. Eng. 124 (5): 376–388. https://doi.org/10.1061/(ASCE)1090-0241(1998)124:5(376).
Ni, P., G. Mei, and Y. Zhao. 2017. “Displacement-dependent earth pressures on rigid retaining walls with compressible geofoam inclusions: Physical modelling and analytical solutions.” Int. J. Geomech. 17 (6): 04016132. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000838.
Ogden, R. W. 1972. “Large deformation isotropic elasticity–on the correlation of theory and experiment for incompressible rubberlike solids.” Proc. R. Soc. London, Ser. A 326 (1567): 565–584. https://doi.org/10.1098/rspa.1972.0026.
Padade, A. H., and J. N. Mandal. 2014. “Expanded polystyrene-based geomaterial with fly ash.” Int. J. Geomech. 14 (6): 06014013. https://doi.org/10.1061/(ASCE)GM.1943-5622.0000390.
Perić, D., M. Miletić, B. R. Shah, A. Esmaeily, and H. Wang. 2016. “Thermally induced soil structure interaction in the existing integral bridge.” Eng. Struct. 106 (1): 484–494. https://doi.org/10.1016/j.engstruct.2015.10.032.
Simulia, D. S. 2013. ABAQUS version 6.13 user’s manual. Providence, RI: ABAQUS.
Tatsuoka, F., D. Hirakawa, M. Nojiri, H. Aizawa, H. Nishikiori, R. Soma, M. Tateyama, and K. Watanabe. 2009. “A new type of integral bridge comprising geosynthetic-reinforced soil walls.” Geosynth. Int. 16 (4): 301–326. https://doi.org/10.1680/gein.2009.16.4.301.
Yang, M., and X. Tang. 2017. “Rigid retaining walls with narrow cohesionless backfills under various wall movement modes.” Int. J. Geomech. 17 (11): 04017098. https://doi.org/10.1061/(ASCE)GM.1943-5622.0001007.
Yapage, N. N. S., D. S. Liyanapathirana, H. G. Poulos, R. B. Kelly, and C. J. Leo. 2013. “Numerical modelling of geotextile-reinforced embankments over deep cement mixed columns incorporating strain-softening behavior of columns.” Int. J. Geomech. 15 (2): 04014047.
Zadehmohamad, M., and J. Bolouri Bazaz. 2019. “Cyclic behaviour of geocell-reinforced backfill behind integral bridge abutment.” Int. J. Geotech. Eng. 13 (5): 438–450. https://doi.org/10.1080/19386362.2017.1364882.
Information & Authors
Information
Published In
Copyright
©2019 American Society of Civil Engineers.
History
Received: Dec 2, 2018
Accepted: Jun 13, 2019
Published online: Dec 2, 2019
Published in print: Feb 1, 2020
Discussion open until: May 2, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.