Effect of Operating and Geometrical Parameters on Ammonia Decomposition in a Tubular Reactor Driven by Concentrating Solar Power
Publication: Journal of Energy Engineering
Volume 146, Issue 4
Abstract
Following the massive consumption of traditional fossil fuels, the technology of concentrating solar power embedded with energy storage is becoming more and more attractive. Within this new trend, ammonia-based thermochemical energy storage is prospectively promising. The aim of this study is to simulate the ammonia decomposition reaction in a tubular reactor fully packed with homogeneously isotropic catalyst particles. Ignoring the radial heat conduction and pressure drop, a one-dimensional thermodynamic mathematical model is established to simulate ammonia conversion accounting for operating pressure and temperature, solar flux distribution, and geometric structure. It is concluded from the simulation results that the effect of the operating temperature on ammonia conversion is more predominant than the effect of the operating pressure. Furthermore, for the four styles of solar flux distribution, the distribution with the lowest effective deviation is the most suitable style for ammonia decomposition, and the efficiency is improved about 15% compared with . Regarding the geometric structure, the conversion rate progressively increases with diameter and length of the tubular reactor, and an optimization formula is subsequently proposed for geometric design. Ultimately, the design and optimization criterion for the tubular reactor are presented.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The authors are grateful for the financial support provided by the National Natural Science Foundation of China (No. 51961135102).
References
Abdiwe, R. A., and M. Haider. 2016. “A mathematical model for ammonia solar and synthesis reactors.” Renewables: Wind Water Solar 3 (1): 1–7. https://doi.org/10.1186/s40807-016-0034-4.
Anhua, M. 1995. Process technology and design handbook of small synthetic ammonia plant. Beijing: Chemical Industry Press.
Bai, Z., J. Sun, and Q. Liu. 2018. “Comprehensive assessment of line-/point-focus combined scheme for concentrating solar power system.” Int. J. Energy Res. 42 (5): 1983–1998. https://doi.org/10.1002/er.3997.
Carden, P. O. 1974. A large scale solar plant based on the dissociation and synthesis of ammonia. Canberra, Australia: Dept. of Engineering Physics, Research School of Physical Sciences, Australian National Univ.
Carden, P. O. 1977. “Energy corradiation using the reversible ammonia reaction.” Solar Energy 19 (4): 365–378. https://doi.org/10.1016/0038-092X(77)90008-1.
Carden, P. O., and O. Williams. 1978. “The efficiencies of thermochemical energy transfer.” Int. J. Energy Res. 2 (4): 389–406. https://doi.org/10.1002/er.4440020406.
Chen, C., H. Aryafar, G. Warrier, K. M. Lovegrove, and A. S. Lavine. 2016. “Ammonia synthesis for producing supercritical steam in the context of solar thermochemical energy storage.” In Vol. 1734 of Proc., SolarPACES 2015: Int. Conf. on Concentrating Solar Power and Chemical Energy Systems, edited by V. Rajpaul and C. Richter, 1–8. Paris: International Energy Agency.
Dunn, R., K. M. Lovegrove, G. Burgess, and J. Pye. 2012. “An experimental study of ammonia receiver geometries for dish concentrators.” J. Solar Energy Eng. 134 (4): 041007. https://doi.org/10.1115/1.4006891.
Gabriela, B. A., H. P. Kavehpour, and A. S. Lavine. 2016. “Transient behavior of an ammonia-based energy recovery system.” In Proc., ASME 2016 10th Int. Conf. on Energy Sustainability Collocated with the ASME 2016 Power Conf. and the ASME 2016 14th Int. Conf. on Fuel Cell Science, Engineering and Technology, 1–7. New York: ASME.
Grigoriev V., and C. Corsi. 2017. “Unified algorithm of cone optics to compute solar flux on central receiver.” In Proc., American Institute of Physics Conf. Series, 1–6. Melville, NY: AIP Publishing LLC.
Huang, W., and L. Yu. 2018. “Development of a new flux density function for a focusing heliostat.” Energy 151 (May): 358–375. https://doi.org/10.1016/j.energy.2018.03.035.
Lavine, A. S., K. M. Lovegrove, J. Jordan, G. B. Anleu, C. Chen, and H. Aryafar. 2016. “Thermochemical energy storage with ammonia: Aiming for the sunshot cost target.” In Vol. 1734 of Proc., Solarpaces 2015: Int. Conf. on Concentrating Solar Power and Chemical Energy Systems, edited by V. Rajpaul and C. Richter, 1–6. Paris: International Energy Agency.
Li, C. H., and B. A. Finlayson. 1977. “Heat transfer in packed beds—A reevaluation.” Chem. Eng. Sci. 32 (9): 1055–1066. https://doi.org/10.1016/0009-2509(77)80143-7.
Long, X. F., and K. K. Liao. 2008a. “Analysis about thermal performance of ammonia-based thermochemical energy-storing reactor.” [In Chinese.] Thermal Power Gener. 37 (11): 59–63.
Long, X. F., and K. K. Liao. 2008b. “Numerical simulation of ammonia-based exothermic reactor used in solar thermal power generation.” [In Chinese.] J. South China Univ. Technol. 36 (7): 21–25.
Lovegrove, K. M. 1992. Aspects of thermochemical storage and transfer solar energy using ammonia. Canberra, Australia: Australian National Univ.
Lovegrove, K. M. 1993. “Thermodynamic limits on the performance of a solar thermochemical energy storage system.” Int. J. Energy Res. 17 (9): 817–829. https://doi.org/10.1002/er.4440170904.
Lovegrove, K. M. 1996. “High pressure ammonia dissociation experiments for solar energy transport and storage.” Int. J. Energy Res. 20 (11): 965–978. https://doi.org/10.1002/(SICI)1099-114X(199611)20:11%3C965::AID-ER208%3E3.0.CO;2-G.
Lovegrove, K. M., and A. Luzzi. 1996. “Endothermic reactors for an ammonia based thermochemical solar energy storage and transport system.” Solar Energy 56 (4): 361–371. https://doi.org/10.1016/0038-092X(96)00291-5.
Lovegrove, K. M., A. Luzzi, and A. Kreetz. 1999. “Exergy analysis of ammonia-based solar thermochemical power systems.” Solar Energy 66 (2): 103–115. https://doi.org/10.1016/S0038-092X(98)00132-7.
Luzzi, A., and K. M. Lovegrove. 1999. “Techno-economic analysis of a 10 MW e solar thermal power plant using ammonia-based thermochemical energy storage.” Solar Energy 66 (2): 91–101. https://doi.org/10.1016/S0038-092X(98)00108-X.
Okonkwo, E. C., M. Abid, and T. A. H. Ratlamwala. 2019. “Comparative study of heat transfer enhancement in parabolic trough collector based on modified absorber geometry.” J. Energy Eng. 145 (3): 04019007. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000602.
Sánchez-González, A., and D. Santana. 2015. “Solar flux distribution on central receivers: A projection method from analytic function.” Renewable Energy 74 (C): 576–587. https://doi.org/10.1016/j.renene.2014.08.016.
Schwarzbolz, P., M. Schmitz, and R. Pitz-Paal. 2009. “Visual HFCAL—A software for layout and optimization of heliostat fields.” In Proc., SolarPACES 2009, 1–8. Paris: International Energy Agency.
Williams, O. 1980. “Design and cost analysis for an ammonia-based solar thermochemical cavity absorber.” Solar Energy 24 (3): 255–263. https://doi.org/10.1016/0038-092X(80)90482-X.
Wright, J., and T. Lenz. 1979. “Solar energy collection using the reversible ammonia dissociation reaction.” Sun II. 140–144.
Information & Authors
Information
Published In
Journal of Energy Engineering
Volume 146 • Issue 4 • August 2020
Copyright
©2020 American Society of Civil Engineers.
History
Received: May 8, 2019
Accepted: Nov 27, 2019
Published online: Apr 22, 2020
Published in print: Aug 1, 2020
Discussion open until: Sep 22, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.