Valorization of Agricultural Waste: Comparative Study with Focus on Improving the Heating Value of Biomass
Publication: Journal of Energy Engineering
Volume 146, Issue 4
Abstract
Agro-based biomass is a viable alternative to fossil fuels, but problems such as ash slagging, fouling, and heated-surface corrosion impose negative impacts on the process of thermal conversion of biomass. Demineralization is a pretreatment process that can be used to alleviate these problems by decreasing the ash content of biomass feedstock. In this research work, rice husk (RH) and cotton stalk (CS) were leached with three different acid solutions (, HCl, and ) to investigate the potential effects on the fuel characteristics of the biomass. The leaching agents dissolved the minerals present in the biomasses and reduced the ash content; however, the percentage reduction of ash content in RH () was lower than that in CS (). The high heating value (HHV) of both demineralized biomasses increased due to the increase in overall carbon content; however, the percentage increase in HHV in CS was greater than that in RH. The HHV of treated RH samples increased to 16.48, 16.20, and when treated with , HCl, and , respectively, compared with raw RH (). In the CS samples, the HHV of -, HCl-, and -treated samples increased to 19.80, 19.20, and 18.90, respectively, compared with raw CS (). The thermogravimetric characterization of leached biomass showed that the demineralization with acid solutions increased the thermal stability. Fourier-transform infrared spectroscopy and scanning electron microscopy analysis illustrated that the acid leaching induced significant physiochemical structure changes in the treated biomasses. The study demonstrated that demineralization has the ability to reduce the ash content of the biomass, which improved the energy value of the biomass.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
The research work was supported by the Department of Chemical Engineering, University of Engineering and Technology, Lahore Pakistan.
References
Ait Baddi, G., M. Hafidi, J. Cegarra, J. A. Alburquerque, J. Gonzálvez, V. Gilard, and J. C. Revel. 2004. “Characterization of fulvic acids by elemental and spectroscopic (FTIR and 13C-NMR) analyses during composting of olive mill wastes plus straw.” Bioresour. Technol. 93 (3): 285–290. https://doi.org/10.1016/j.biortech.2003.10.026.
Asadieraghi, M., W. Mohd, and A. Wan. 2014. “Characterization of lignocellulosic biomass thermal degradation and physiochemical structure: Effects of demineralization by diverse acid solutions.” Energy Convers. Manage. 82 (Jun): 71–82. https://doi.org/10.1016/j.enconman.2014.03.007.
Aslam, U., N. Ramzan, T. Iqbal, M. Kazmi, and A. Ikhlaq. 2016. “Effect of demineralization on the physiochemical structure and thermal degradation of acid treated indigenous rice husk.” Pol. J. Chem. Technol. 18 (3): 117–121. https://doi.org/10.1515/pjct-2016-0057.
ASTM. 1997. Standard test method for gross calorific value. ASTM D1989. West Conshohocken, PA: ASTM.
ASTM. 2017. Standard test method for moisture in the analysis sample. ASTM D3173. West Conshohocken, PA: ASTM.
ASTM. 2018. Standard test method for ash in the analysis sample. ASTM D3174. West Conshohocken, PA: ASTM.
ASTM. 2020. Standard test method for volatile matter in the analysis sample. ASTM D3175. West Conshohocken, PA: ASTM.
Biedermann, F., and I. Obernberger. 2005. “Ash-related problems during biomass combustion and possibilities for a sustainable ash utilisation.” In Proc., Int. Conf. “World Renewable Energy Congress” (WREC), 120–124. Coldwater, MS: WREC.
Carrillo, M. A., S. A. Staggenborg, and J. A. Pineda. 2014. “Washing sorghum biomass with water to improve its quality for combustion.” Fuel 116 (Jan): 427–431. https://doi.org/10.1016/j.fuel.2013.08.028.
Chin, K. L., P. S. H’ng, M. T. Paridah, K. Szymona, M. Maminski, S. H. Lee, W. C. Lum, M. Y. Nurliyana, M. J. Chow, and W. Z. Go. 2015. “Reducing ash related operation problems of fast growing timber species and oil palm biomass for combustion applications using leaching techniques.” Energy 90 (Oct): 622–630. https://doi.org/10.1016/j.energy.2015.07.094.
Eom, I. Y., K. H. Kim, J. Y. Kim, S. M. Lee, H. M. Yeo, I. G. Choi, and J. W. Choi. 2011. “Characterization of primary thermal degradation features of lignocellulosic biomass after removal of inorganic metals by diverse solvents.” Bioresour. Technol. 102 (3): 3437–3444. https://doi.org/10.1016/j.biortech.2010.10.056.
Fierro, V., and V. Torn. 2007. “Influence of the demineralisation on the chemical activation of Kraft lignin with orthophosphoric acid.” J. Hazard. Mater. 149 (1): 126–133. https://doi.org/10.1016/j.jhazmat.2007.03.056.
Jakab, E., E. Mészáros, and J. Borsa. 2010. “Effect of slight chemical modification on the pyrolysis behavior of cellulose fibers.” J. Anal. Appl. Pyrolysis 87 (1): 117–123. https://doi.org/10.1016/j.jaap.2009.10.012.
Jerzak, W. 2020. “Effect of pine bark combustion temperature on content of major, minor, and trace elements in ashes: Experimental study and thermodynamic equilibrium calculations.” J. Energy Eng. 146 (1): 1–9. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000632.
Jiang, L., S. Hu, L. Sun, S. Su, K. Xu, L. He, and J. Xiang. 2013. “Influence of different demineralization treatments on physicochemical structure and thermal degradation of biomass.” Bioresour. Technol. 146 (Oct): 254–260. https://doi.org/10.1016/j.biortech.2013.07.063.
Liu, H., L. Zhang, Z. Han, B. Xie, and S. Wu. 2013. “The effects of leaching methods on the combustion characteristics of rice straw.” Biomass Bioenergy 49 (Feb): 22–27. https://doi.org/10.1016/j.biombioe.2012.12.024.
Liu, X., and X. T. Bi. 2011. “Removal of inorganic constituents from pine barks and switchgrass.” Fuel Process. Technol. 92 (7): 1273–1279. https://doi.org/10.1016/j.fuproc.2011.01.016.
Pandey, K. K. 1999. “A study of chemical structure of soft and hardwood and wood polymers by FTIR spectroscopy.” J. Appl. Polym. Sci. 71 (12): 1969–1975. https://doi.org/10.1002/(SICI)1097-4628(19990321)71:12%3C1969::AID-APP6%3E3.0.CO;2-D.
Reza, M. T., R. Emerson, M. H. Uddin, G. Gresham, and C. J. Coronella. 2015. “Ash reduction of corn stover by mild hydrothermal preprocessing.” Biomass Convers. Biorefin. 5 (1): 21–31. https://doi.org/10.1007/s13399-014-0122-x.
Socrates, G. 2004. Infrared and Raman characteristic group frequencies. New York: Wiley.
Stefanidis, S. D., E. Heracleous, D. Th, K. G. Kalogiannis, C. M. Michailof, and A. A. Lappas. 2015. “Optimization of bio-oil yields by demineralization of low quality biomass.” Biomass Bioenergy 83 (Dec): 105–115. https://doi.org/10.1016/j.biombioe.2015.09.004.
Tan, H., and S. Wang. 2009. “Experimental study of the effect of acid-washing pretreatment on biomass pyrolysis.” J. Fuel Chem. Technol. 37 (6): 668–672. https://doi.org/10.1016/S1872-5813(10)60014-X.
Tzivanidis, C., and E. Bellos. 2019. “Energetic, exergetic, and financial investigation of biomass-driven trigeneration system.” J. Energy Eng. 145 (6): 04019020. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000622.
Vamvuka, D., and S. Sfakiotakis. 2011. “Effects of heating rate and water leaching of perennial energy crops on pyrolysis characteristics and kinetics.” Renewable Energy 36 (9): 2433–2439. https://doi.org/10.1016/j.renene.2011.02.013.
Vassilev, S. V., D. Baxter, L. K. Andersen, C. G. Vassileva, and T. J. Morgan. 2012. “An overview of the organic and inorganic phase composition of biomass.” Fuel 94 (Apr): 1–33. https://doi.org/10.1016/j.fuel.2011.09.030.
Yousefzad Farrokhi, F., and F. Kazanç. 2018. “Combustion behavior and kinetics of Turkish lignite blended with biomass/magnesite dust.” J. Energy Eng. 144 (6): 04018064. https://doi.org/10.1061/(ASCE)EY.1943-7897.0000579.
Yu, C. T., W. H. Chen, L. C. Men, and W. S. Hwang. 2008. “Microscopic structure features changes of rice straw treated by boiled acid solution.” Ind. Crops Prod. 9 (2–3): 308–315. https://doi.org/10.1016/j.indcrop.2008.06.005.
Information & Authors
Information
Published In
Copyright
©2020 American Society of Civil Engineers.
History
Received: Jun 22, 2019
Accepted: Feb 6, 2020
Published online: Apr 27, 2020
Published in print: Aug 1, 2020
Discussion open until: Sep 27, 2020
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.