Implementation of Noise-Free and Vibration-Free PHC Screw Piles on the Basis of Full-Scale Tests
Publication: Journal of Construction Engineering and Management
Volume 139, Issue 8
Abstract
Noise and vibration caused by pile driving may disturb surrounding areas to the extent that nearby residents and businesses may file civil complaints, which can bring construction to a halt. To overcome these issues, construction engineers have worked diligently to develop low-noise and low-vibration pile driving methods. One such method, involving noise-free and vibration-free pretensioned spun high-strength concrete (PHC) screw piles, is proposed in this paper. This pile driving method penetrates the ground by rotating and compressing the pile to minimize noise and vibration in addition to maximizing capacity. A noise-free and vibration-free PHC screw pile prototype, the first of its kind, was manufactured and subjected to two pilot tests to determine its production and construction requirements in addition to its performance. In pilot tests, the new noise-free and vibration-free PHC screw pile driving method was found to successfully reduce noise and vibration compared with pile driving involving conventional piles.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was supported by Kyungsung University Research Grants in 2013.
References
Basu, P., and Prezzi, M. (2009). “Design and applications of drilled displacement (screw) piles.”, Federal Highway Administration, Washington, DC.
Bottiau, M. (2006). “Recent evaluation in deep foundation technologies.” Proc., Int. Conf. on Piling and Deep Foundations, Deep Foundations Institute, Hawthorne, NJ, 46–83.
Cho, C. H. (2010). Piling engineering practice, ENG Books, Seoul.
Kang, D. J., Lee, W. S., and Lee, J. W. (2003). “Characteristics of construction machinery noise.” Rep. Prepared for the National Institute of Environmental Research, Incheon Metropolitan City, Korea.
Kim, Y. P. (2010). “Behavior analysis of environmentally friendly noise and vibration-free screw concrete pile method by means of numerical analysis.” M.S. thesis, Kyungsung Univ., Busan, Korea.
Ministry of Environment. (2006). “Guidance to noise and vibration control under construction.” Internal Rep., Incheon Metropolitan City, Korea.
Sigma/w 2007 [Computer software]. Geo-Slope, Calgary, AB, Canada.
Van Impe, W. F. (1988). “Considerations on the auger pile design.” Proc., Int Conf. on Deep Foundations on Bored and Auger Piles, Balkema, Leiden, Netherlands.
Van Impe, W. F. (1996). “Deep foundations on screw piles.” Proc., Int. Conf. on Deep Foundations, Korean Geotechnical Society, Seoul, 109–151.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Dec 19, 2011
Accepted: Dec 18, 2012
Published online: Jul 15, 2013
Published in print: Aug 1, 2013
Discussion open until: Dec 15, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.