Standardizing Housing Defects: Classification, Validation, and Benefits
Publication: Journal of Construction Engineering and Management
Volume 139, Issue 8
Abstract
Defects produce economic and temporal deviations in construction projects. Although learning from past experiences can help reduce defects and their consequences, usually data is not easily available or is poorly structured and difficult to analyze. Several structured classification systems for defects exist, but regionally specific construction activities make the data unviable for research use. This paper presents the development and the validation of a defects’ classification system for the Spanish housing sector. From the analysis of the existing defect classification systems, a first draft was developed to be discussed and improved in a series of workshops done by a panel of experts. Afterward, the final classification was validated by experts’ interviews. The experts evaluated the epistemological adequacy and reusability of the proposed classification system. The results demonstrate the suitability of the classification system. In addition, the validation revealed that the classification can be implemented in tracking systems, and it can be used to analyze defects in the Spanish housing sector. Finally, the classification was used in a case study to analyze the real use, and it demonstrated the potential uses of the classification.
Get full access to this article
View all available purchase options and get full access to this article.
References
Asociación de empresas constructoras de ámbito nacional (SEOPAN). (2011). “Informe Económico 2011.” Departamento de Economía, Madrid, Spain, 〈http://www.seopan.es/ficheros/edb3263cdc26d0f5739323115191f76c.pdf〉 (Oct. 19, 2012).
Atkinson, G. (1987). “A century of defects.” Building, 54–55.
Battikha, M. G. (2008). “Reasoning mechanism for construction nonconformance root-cause analysis.” J. Constr. Eng. Manage., 134(4), 280–288.
Burati, J. L., Farrington, J. J., and Ledbetter, W. B. (1992). “Causes of quality deviations in design and construction.” J. Constr. Eng. Manage., 118(1), 34–49.
Castro, N., and Montero, F. (1995). “Informe sobre la vivienda en España. Calidad y reclamaciones.” Estudio sobre consumo, 11(34), 95–118.
Chew, M. Y. L. (2005). “Defect analysis in wet areas of buildings.” Constr. Build. Mater., 19(3), 165–173.
Chong, W. K., and Low, S. P. (2005). “Assessment of defects at construction and occupancy stages.” J. Perform. Constr. Facil., 19(4), 283–289.
Chong, W. K., and Low, S. P. (2006). “Latent building defects: Causes and design strategies to prevent them.” J. Perform. Constr. Facil., 20(3), 213–221.
CIB Working Commission W86. (1993). Building Pathology: A State-of-the Art Rep, International Council for Building Research Studies and Documentation, Rotterdam, The Netherlands.
Davis, K., Ledbetter, W. B., and Burati, J. L. (1989). “Measuring design and construction quality costs.” J. Constr. Eng. Manage., 115(3), 389–400.
Dorter, J. B., and Sharkey, J. J. A. (1990). Building and construction contracts in Australia, The Law Book, Sydney, Australia.
El-Diraby, T. E., and Kashif, K. F. (2005). “Distributed ontology architecture for knowledge management in highway construction.” J. Constr. Eng. Manage., 131(5), 591–603.
Farrington, J. J. (1987). “A methodology to identify and categorize costs of quality deviations in design and construction.” Ph.D. thesis, Clemson Univ., Clemson, SC.
Forcada, N., Macarulla, M., Fuertes, A., Casals, M., Gangolells, M., and Roca, X. (2012a). “Influence of building type on post-handover defects in housing.” J. Perform. Constr. Facil., 26(4), 433–440.
Forcada, N., Macarulla, M., Gangolells, M., Casals, M., Fuertes, A., and Roca, X. (2012b). “Post-handover housing defects: Sources and origins.” J. Perform. Constr. Facil., in press.
Forcada, N., Macarulla, M., and Love, P. E. D. (2013). “Assessment of residential defects at post-handover.” J. Constr. Eng. Manage., 139(4), 372–378.
Georgiou, J. (2010). “Verification of a building defect classification system for housing.” Struc. Surv., 28(5), 370–383.
Georgiou, J., Love, P. E. D., and Smith, J. (1999). “A comparison of defects in houses constructed by owners and registered builders in the Australian state of Victoria.” Struc. Surv., 17(3), 160–169.
Ilozor, B. D., Okoroh, M. I., Egbu, C. E., and Archicentre (2004). “Understanding residential house defects in Australia from the state of Victoria.” Build. Environ., 39(3), 327–337.
ISO. (2005). “Quality management principles.”, Geneva, Switzerland.
ISO. (2008). “Quality management systems-Requirements.”, Geneva, Switzerland.
Johnssona, H., and Meilinga, J. H. (2009). “Defects in offsite construction: Timber module prefabrication.” Constr. Manage. Econ., 27(7), 667–681.
Josephson, P., Larsson, B., and Li, H. (2002). “Illustrative benchmarking rework and rework costs in Swedish construction industry.” J. Manage. Eng., 18(2), 76–83.
Josephson, P. E., and Hammarlund, Y. (1999). “The causes and costs of defects in construction: A study of seven building projects.” Autom. Constr., 8(6), 681–687.
Leonard, D., and Taggart, J. (2010). “Quality management and high performance home building: A case study of Veridian homes.” The Economics of Quality, Multi-Year Advanced Residential Building Systems Research. Final Report of Quality Assurance Activities for New Homes, NAHB Research Center, Upper Marlboro, MD, 3–25.
Lopez, R., Love, P. E. D., Edwards, D. J., and Davis, P. R. (2010). “Design error classification, causation, and prevention in construction engineering.” J. Perform. Constr. Facil., 24(4), 399–408.
Love, P. E. D. (2002a). “Auditing the indirect consequences of rework in construction: A case based approach.” Managerial Audit. J., 17(3), 138–146.
Love, P. E. D. (2002b). “Influence of project type and procurement method on rework costs in building construction projects.” J. Constr. Eng. Manage., 128(1), 18–29.
Love, P. E. D., Edwards, D. J., Irani, Z., and Goh, Y. M. (2011). “Dynamics of rework in complex offshore hydrocarbon projects.” J. Constr. Eng. Manage., 137(12), 1060–1070.
Love, P. E. D., Edwards, D. J., Irani, Z., and Walker, D. H. T. (2009). “Project pathogens: The anatomy of omission errors in construction and resource engineering project.” IEEE Trans. Eng. Manage., 56(3), 425–435.
Love, P. E. D., Irani, Z., and Edwards, D. J. (2004). “A rework reduction model for construction projects.” IEEE Trans. Eng. Manage. 51(4), 426–440.
Manrique, J. D., Al-Hussein, M., Teylas, A., and Funston, G. (2007). “Case study-based challenges of quality concrete finishing for architecturally complex structures.” J. Constr. Eng. Manage., 133(3), 208–216.
Mills, A., Love, P. E. D., and Williams, P. (2009). “Defect costs in residential construction.” J. Constr. Eng. Manage., 135(1), 12–16.
Ministerio de Vivienda. (2006). “Código Técnico de la Edificación.” 314/2006, Madrid (in Spanish).
Pons, P. (2010). “Evolution of prefabricated technologies applied to building schools.” Informes De La Construcción, 62(520), 15–26.
Porteous, W. A. (1992). “Classifying building failure by cause.” Build. Res. Inf., 20(6), 350–356.
Reason, J. T., and Hobbs, A. (2003). Managing maintenance error: A practical guide, Ashgate Publishing, Farnham, UK.
Silvestre, J., and de Brito, J. (2010). “Inspection and repair of ceramic tiling within a building management system.” J. Mater. Civ. Eng., 22(1), 39–48.
Sommerville, J., and McCosh, J. (2006). “Defects in new homes: An analysis of data on 1.696 new U.K. houses.” Struc. Surv., 24(1), 6–21.
Tang, S. L., Aoieong, R. T., and Ahmed, S. M. (2004). “The use of process cost model (PCM) for measuring quality costs of construction projects: Model testing.” Constr. Manage. Econ., 22(3), 263–275.
Trotman, P. (1994). “An examination of the BRE advisory service database compiled from property inspections.” Proc., Int. Symp. on Dealing with Defects in Buildings, M. Moroni, and P. Sartori, eds., Varenna, Italy, 187–196.
Wardhana, K., and Hadripriono, F. C. (2003). “Analysis of recent bridge failures in the United States.” J. Perform. Constr. Facil., 17(3), 144–150.
Watt, D. S. (1999). Building pathology: Principles & practice, Wiley-Blackwell, Oxford, UK.
Yung, P., and Yip, B. (2010). “Construction quality in China during transition: A review of literature and empirical examination.” Int. J. Project Manage., 28(1), 79–91.
Information & Authors
Information
Published In
Copyright
© 2013 American Society of Civil Engineers.
History
Received: Jan 24, 2012
Accepted: Dec 18, 2012
Published online: Dec 21, 2012
Discussion open until: May 21, 2013
Published in print: Aug 1, 2013
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.