Activity-Based Safety Risk Quantification for Concrete Formwork Construction
Publication: Journal of Construction Engineering and Management
Volume 135, Issue 10
Abstract
Most of safety risk research focuses on high-severity safety risks for large-scale construction processes. Such studies help firms identify the highest risk processes so they may be targeted for improvement. However, few studies quantify safety risk at the activity level or include low-severity, high-frequency risks that some literatures suggest contribute to a large proportion of total risk. This paper presents research that involved the holistic quantification of risks for the activities associated with the construction of concrete formwork. Three major research efforts are discussed: (1) identification of activities required to construct concrete formwork; (2) selection of an appropriate all-inclusive and mutually exclusive risk classification system; and (3) the quantification of the average frequency and severity levels for each risk classification associated with each activity. To identify formwork construction activities, 256 worker-hours of observation were conducted and the resulting activity descriptions were reviewed and validated by industry professionals. Risk classifications appropriate for this study were created by aggregating relevant literature. Finally, the Delphi method was implemented to individually quantify average frequency and severity using scales that define the entire spectrum of possible values. In total, 130 frequency ratings and 130 severity ratings were obtained over three rounds of Delphi surveys. Results indicate that there are 13 major activities required to construct concrete formwork and the highest risk activities are applying form oil, lifting and lowering form components, and accepting materials from a crane. The data presented in this paper can be used to target specific high-risk formwork construction activities for improvement.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The writers thank the thirteen expert panelists for their time investment, candor, and significant contributions to this study.
References
Baradan, S., and Usmen, M. A. (2006). “Comparative injury and fatality risk analysis of building trades.” J. Constr. Eng. Manage., 132(5), 533–539.
Brauer, R. L. (1994). “Risk management and assessment.” Safety and health for engineers, Van Nostrand Reinhold, New York, 543–572.
Carter, G., and Smoth, S. D. (2006). “Safety hazard identification on construction projects.” J. Constr. Eng. Manage., 132(2), 197–205.
Center for Construction Research and Training. (2008). Construction chartbook, CPWR, Silver Springs, Md.
Coble, R. J., and Hinze, J. (2000). “Analysis of the magnitude of underpayment of 1997 construction industry workers’ compensation premiums in the state of Florida.” International Research Report, University of Florida, 34–48.
Everett, J. (1999). “Overexertion injuries in construction.” J. Constr. Eng. Manage., 125(2), 109–114.
Everett, J., and Frank, P. (1996). “Costs of accidents and injuries due to the construction industry.” J. Constr. Eng. Manage., 122(2), 158–164.
Fredericks, T. K., Abudayyeh, O., Choi, S. D., Wiersma, M., and Charles, M. (2005). “Occupational injuries and fatalities in the roofing contracting industry.” J. Constr. Eng. Manage., 131(11), 1233–1240.
Hallowell, M. R., and Gambatese, J. A. (2008). “Quantification and communication of construction safety risk.” Proc., 2008 Working Commission on Safety and Health on Construction Sites Annual Conference, International Council for Research and Innovation in Building and Construction, Gainesville, Fla.
Hallowell, M. R., and Gambatese, J. A. (2007). “A formal model of construction safety risk management.” Proc., 2007 Construction and Building Research Conference (COBRA), Royal Institution of Chartered Surveyors and Georgia Tech University, Atlanta, Ga.
Har, W. Y. (2002). “Ergonomic studies on formwork carpentry.” Appl. Ergon, 3, 683–686.
Hinze, J. (1997). Construction safety, Prentice-Hall, Englewood Cliffs, N.J.
Huang, X., and Hinze, J. (2003). “Analysis of construction worker fall accidents.” J. Constr. Eng. Manage., 129(3), 262–271.
Jannadi, O., and Almishari, S. (2003). “Risk assessment in construction.” J. Constr. Eng. Manage., 129(5), 492–500.
Lee, S., and Halpin, D. (2003). “Predictive tool for estimating accident risk.” J. Constr. Eng. Manage., 129(4), 431–436.
Mitropoulos, P., Abdelhamid, T., and Howell, G. (2005). “Systems model of construction accident causation.” J. Constr. Eng. Manage., 131(7), 816–825.
National Safety Council. (2006). Accident facts, Itasca, Ill.
Rajendran, S. (2006). “Sustainable construction safety and health rating system.” Ph.D. dissertation, Oregon State University, Corvallis, Ore.
Rogers, M., and Lopez, E. (2002). “Identifying critical cross-cultural school psychology competencies.” J. Soc. Psychol., 40(2), 115–141.
Sun, Y., Fang, D., Wang, S., Dai, M., and Lv, X. (2008). “Safety risk identification and assessment for Beijing Olympic venues construction.” J. Manage. Eng., 24(1), 40–47.
Yi, K., and Langford, D. (2006). “Scheduling-based risk estimation and safety planning for construction projects.” J. Constr. Eng. Manage., 132(6), 626–635.
Information & Authors
Information
Published In
Copyright
© 2009 ASCE.
History
Received: Jul 22, 2008
Accepted: Apr 9, 2009
Published online: Apr 14, 2009
Published in print: Oct 2009
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.