Safety Assessment of the Community Facilities for the Prevention of Pedestrian Fall Incidents: Concrete Footpaths and Walkways
Publication: Journal of Performance of Constructed Facilities
Volume 36, Issue 6
Abstract
Concrete pavers and slabs commonly are found in a variety of community settings, such as footpaths and walkways. However, their features of slip resistance have not been investigated meticulously for the prevention of slip and fall incidents. This preliminary study assessed the traction functioning of dissimilar finishes of concrete surfaces and determined their impact on slip resistance. For the preparation of concrete slab samples, three generally practiced approaches—metal and wood blade troweling, and bloom-sweeping—were utilized to create dissimilar topographic structures. Slip resistance performance was assessed using a dynamic friction test rig developed to simulate ambulatory movements between the concrete flooring and shoe samples over four different levels of risky conditions. Assessment findings showed that the measured concrete slab–shoe arrangements presented excellent slip resistance in dry conditions. A substantial impact of the concrete slabs’ topographic structures was uncovered in moderately (soapy) and highly (oily) dangerous surroundings. However, the shoe effect was rather insignificant than the slab one on dynamic friction coefficients. This study also discovered that concrete floors with rougher textures did not routinely provide better traction even in contaminated situations. On the other hand, this study identified crucial proof of friction and friction-provoked wear developments of concrete floorings and their effects on slip resistance performance. Outcomes from this study may be used to improve surface designs of the concrete footpaths and/or pavements to preclude slip and fall incidents in the community.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, and code generated or used during the study appear in the published article.
Acknowledgments
This study was supported by research project grants (Grant Nos. 1702040565-P and 1702040573-P) from the University of Sharjah, Sharjah, UAE.
References
AS/NZS (Standards Australia/New Zealand Standards). 2004. Slip resistance measurement of existing pedestrian surfaces. AS/NZS 4663. Sydney: AZ/NZS.
ASTM. 1998. Standard practice for petrographic examination of hardened concrete. ASTM C856. West Conshohocken, PA: ASTM.
Björnstig, U., J. Björnstig, and A. Dahlgren. 1997. “Slipping on ice and snow—Elderly women and young men are typical victims.” Accid. Anal. Prev. 29 (2): 211–215. https://doi.org/10.1016/S0001-4575(96)00074-7.
Bulajic-Kopjar, M. 2000. “Seasonal variations in incidence of fractures among elderly people.” Inj. Prev. 6 (1): 16–19. https://doi.org/10.1136/ip.6.1.16.
CCAA (Cement Concrete & Aggregates Australia). 2000. Guide to concrete for housing. St. Leonards, UK: CCAA.
CCAA (Cement Concrete & Aggregates Australia). 2008. Guide to concrete flatwork finishes. St. Leonards, UK: CCAA.
CCANZ (Cement & Concrete Association of New Zealand). 2010. The New Zealand guide to concrete construction. Wellington, NZ: CCANZ.
Chang, W.-R., I.-J. Kim, D. P. Manning, and Y. Bunterngchit. 2001. “The role of surface roughness in the measurement of slipperiness.” Ergonomics 44 (13): 1200–1216. https://doi.org/10.1080/00140130110085565.
Gao, C., I. Holmér, and J. Abeysekera. 2008. “Slips and falls in a cold climate: Underfoot surface, footwear design and worker preferences for preventive measures.” Appl. Ergon. 39 (3): 385–391. https://doi.org/10.1016/j.apergo.2007.08.001.
Gerardi, J. 2021. “Types of concrete finishes.” Accessed December 15, 2021. https://proest.com/construction/tips/concrete-finishes/.
Gyllencreutz, L., J. Björnstig, E. Rolfsman, and B.-I. Saveman. 2014. “Outdoor pedestrian fall-related injuries among Swedish senior citizens–injuries and preventive strategies.” Scand. J. Caring Sci. 29 (2): 225–233. https://doi.org/10.1111/scs.12153.
Hantula, D. A., J. L. D. Bragger, and A. K. Rajala. 2001. “Slips and falls in stores and malls: Implications for community-based injury prevention.” J. Prev. Intervention Community 22 (1): 67–79. https://doi.org/10.1080/10852350109511212.
Haslam, R., and V. Filingeri. 2018. “Slips, trips and falls in crowds.” In Proc., 20th Congress of the Int. Ergonomics Association (IEA 2018), edited by S. Bagnara, R. Tartaglia, S. Albolino, T. Alexander, and Y. Fujita, 752–758. Cham, Switzerland: Springer.
Kelsey, J. L., S. D. Berry, E. Procter-Gray, L. Quach, U.-S. D. T. Nguyen, W. Li, D. P. Kiel, L. A. Lipsitz, and M. T. Hannan. 2010. “Indoor and outdoor falls in older adults are different: The maintenance of balance, independent living, intellect, and zest in the elderly of Boston study.” J. Am. Geriatrics Soc. 58 (11): 2135–2141. https://doi.org/10.1111/j.1532-5415.2010.03062.x.
Kim, I. J. 2015. “Slip-resistance measurements for assessing pedestrian falls: Facts and fallacies.” In Accidental falls: Risk factors, prevention strategies and long-term outcomes, edited by B. Evans, 105–125. Hauppauge, NY: Nova Science.
Kim, I.-J. 2016a. “Identifying shoe wear mechanisms and associated tribological characteristics: The importance for slip resistance evaluation.” Wear 360–361 (Aug): 77–86. https://doi.org/10.1016/j.wear.2016.04.020.
Kim, I.-J. 2016b. “A study on wear development of floor surfaces: Impact on pedestrian walkway slip-resistance performance.” Tribol. Int. 95 (Mar): 316–323. https://doi.org/10.1016/j.triboint.2015.11.039.
Kim, I.-J. 2017. Pedestrian fall safety assessments: Improved understanding on slip resistance measurements and investigations. Cham, Switzerland: Springer.
Kim, I.-J. 2018a. “Investigation and interpretation of flooring wear development for pedestrian fall safety assessments.” Tribol. Trans. 61 (1): 168–177. https://doi.org/10.1080/10402004.2017.1287318.
Kim, I.-J. 2018b. “Investigation of floor surface finishes for optimal slip resistance performance.” Saf. Health Work 9 (1): 17–24. https://doi.org/10.1016/j.shaw.2017.05.005.
Kim, I.-J. 2018c. “Understanding friction and wear behaviours of smooth resilient surfaces: Application for pedestrian fall safety improvements.” Adv. Mater. Sci. Eng. 2018 (Oct): 1–10. https://doi.org/10.1155/2018/3280279.
Kim, I.-J. 2021. “Hospital flooring safety and health: Knowledge gaps and suggestions.” Int. J. Occup. Saf. Ergon. 27 (4): 1116–1135. https://doi.org/10.1080/10803548.2019.1688473.
Kim, I.-J. 2022. Engineering metrology for pedestrian falls prevention and protection: Theories to applications for designing safer shoes and floors. Cham, Switzerland: Springer.
Kim, I.-J., H. Hsiao, and P. Simeonov. 2013. “Functional levels of floor surface roughness for the prevention of slips and falls: Clean-and-dry and soapsuds-covered wet surfaces.” Appl. Ergon. 44 (1): 58–64. https://doi.org/10.1016/j.apergo.2012.04.010.
Kim, I.-J., and H. Nagata. 2008. “Research on slip resistance measurements—A new challenge.” Ind. Health 46 (1): 66–76. https://doi.org/10.2486/indhealth.46.66.
Kim, I.-J., and R. Smith. 2000. “Observation of the floor surface topography changes in pedestrian slip resistance measurements.” Int. J. Ind. Ergon. 26 (6): 581–601. https://doi.org/10.1016/S0169-8141(00)00024-X.
Kim, I.-J., and R. Smith. 2003. “A critical analysis of the relationship between shoe-floor wear and pedestrian/walkway slip resistance.” In Metrology of pedestrian locomotion and slip resistance, edited by M. Marpet and M. Sapienza, 33–48. West Conshohocken, PA: ASTM.
Kosmatka, S. H., B. Kerkhoff, and W. C. Panarese. 2002. Design and control of concrete mixtures. 14th ed. Skokie, IL: Portland Cement Association.
Li, W., T. H. M. Keegan, B. Sternfeld, S. Sidney, C. P. Quesenberry Jr., and J. L. Kelsey. 2006. “Outdoor falls among middle-aged and older adults: A neglected public health problem.” Am. J. Public Health 96 (7): 1192–1200. https://doi.org/10.2105/AJPH.2005.083055.
Mahajan, B. 2019. “10 concrete finishes types.” In Civiconcepts. Surat, Gujarat, India: Civiconcepts.
Manning, D. P., and C. Jones. 2001. “The effect of roughness, floor polish, water, oil and ice on underfoot friction: Current safety footwear solings are less slip resistant than microcellular polyurethane.” Appl. Ergon. 32 (2): 185–196. https://doi.org/10.1016/S0003-6870(00)00055-7.
Perkins, P. J., and M. P. Wilson. 1983. “Slip resistance testing of shoes—New development.” Ergonomics 26 (1): 73–82. https://doi.org/10.1080/00140138308963314.
Sadowski, L., and T. Mathia. 2016. “Multi-scale metrology of concrete surface morphology: Fundamentals and specificity.” Constr. Build. Mater. 113 (Jun): 613–621. https://doi.org/10.1016/j.conbuildmat.2016.03.099.
Schepers, P., B. den Brinker, R. Methorst, and M. Helbich. 2017. “Pedestrian falls: A review of the literature and future research directions.” J. Saf. Res. 62 (Sep): 227–234. https://doi.org/10.1016/j.jsr.2017.06.020.
Shaw, R. 2009. “Development of a more accurate assessment of roughness parameters for flooring. Derbyshire, UK: Health and Safety Executive.
Stevenson, M. G., K. Hoang, Y. Bunterngchit, and D. G. Lloyd. 1989. “Measurement of slip resistance of shoes on floor surfaces, Part 1: Methods.” J. Occup. Health Saf. 5 (2): 115–120.
Strandberg, L., and H. Lanshammar. 1981. “The dynamics of slipping accidents.” J. Occup. Accid. 3 (3): 153–162. https://doi.org/10.1016/0376-6349(81)90009-2.
von Fay, K. F. 2015. Guide to concrete repair. 2nd ed. Denver, CO: US Dept. of the Interior, Bureau of Reclamation, Technical Service Center.
Information & Authors
Information
Published In
Journal of Performance of Constructed Facilities
Volume 36 • Issue 6 • December 2022
Copyright
© 2022 American Society of Civil Engineers.
History
Received: Mar 21, 2022
Accepted: Jul 8, 2022
Published online: Sep 27, 2022
Published in print: Dec 1, 2022
Discussion open until: Feb 27, 2023
ASCE Technical Topics:
- Business management
- Concrete
- Concrete slabs
- Continuum mechanics
- Design (by type)
- Dynamics (solid mechanics)
- Engineering fundamentals
- Engineering materials (by type)
- Engineering mechanics
- Floors
- Friction
- Infrastructure
- Load and resistance factor design
- Load factors
- Materials engineering
- Occupational safety
- Practice and Profession
- Public administration
- Public health and safety
- Safety
- Slabs
- Solid mechanics
- Structural design
- Structural engineering
- Structural members
- Structural systems
- Urban and regional development
- Urban areas
- Walkways
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.
Cited by
- Giuseppe Cantisani, Salvatore Bruno, Antonio D’Andrea, Giuseppe Loprencipe, Paola Di Mascio, Laura Moretti, Methods for Measuring and Assessing Irregularities of Stone Pavements—Part II, Sustainability, 10.3390/su15043715, 15, 4, (3715), (2023).