Hybrid Dynamic-Empirical Building Energy Modeling Approach for an Existing Campus Building
Publication: Journal of Architectural Engineering
Volume 22, Issue 1
Abstract
A hybrid modeling framework was constructed to investigate the uncertainty in modeling the energy consumption of an existing campus building with minimal instrumentation. The hybrid framework consisted of a dynamic model of the building’s conditioned spaces, coupled with an empirical model of the building’s HVAC system. The empirical model was calibrated using linear regression of available HVAC system temperature and flow measurements from a building automation system to develop estimates of internal loads and relationships between envelope heat gains/losses and indoor/outdoor temperatures. Crabtree Hall, a 40-year-old building at the University of Pittsburgh, was used as an illustrative case study for this approach. A separate data collection time frame was used for empirical model verification in addition to the initial model development time frame. Comparative results from the model showed a 20% normalized RMS deviation for hourly net heating and cooling for the average day in a given month. This close agreement highlights the possibilities of this approach for rapid assessment of energy consumption and retrofit potential in existing buildings. Future work will include additional refinement of the components of energy consumption using mobile equipment to collect targeted measurements at additional locations, as well as cross-checking existing measurement locations. Additional future work should include extending this method to buildings with more complex HVAC systems, such as variable-air-volume systems and multiple thermal zones, to further verify and improve its robustness.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This work was supported by National Science Foundation under EFRI-SEED Grant 1038139. The authors thank the Mascaro Center for Sustainable Innovation and Pitt Facilities Management for ongoing assistance with this project.
References
ASHRAE. (2009). 2009 ASHRAE Handbook (Fundamentals), American Society of Heating, Refrigeration and Air Conditioning Engineers (ASHRAE), Atlanta.
Bekkouche, S., Benouaz, T., Cherier, M., Hamdani, M., Yaiche, M., and Benamrane, N. (2013). “Influence of the compactness index to increase the internal temperature of a building in Saharan climate.” Energy Build., 66, 678–687.
Collinge, W. O., Landis, A. E., Jones, A. K., Schaefer, L. A., and Bilec, M. M. (2014). “Productivity metrics in dynamic LCA for whole buildings: Using a post-occupancy evaluation of energy and indoor environmental quality tradeoffs.” Build. Environ., 82, 339–348.
DeBlois, J. C. (2014). “Building energy modeling for green architecture and intelligent dashboard applications.” Doctoral dissertation, Univ. of Pittsburgh, Pittsburgh.
Gowri, K., Winiarski, D. W., and Jarnagin, R. (2009). “Infiltration modeling guidelines for commercial building energy analyses.” Rep. PNNL-18898, USDOE, Pacific Northwest National Laboratory, Richland, WA.
Hemsath, T. L., and Bandhosseini, K. A. (2015). “Sensitivity analysis evaluating basic building geometry’s effect on energy use.” Renewable Energy, 76, 526–538.
James J. Hirsch and Associates. (2012). “The DOE-2 home page.” 〈www.doe2.com〉
Pappas, A., and Reilly, S. (2011). “Streamlining energy simulation to identify building retrofits.” ASHRAE J., 53(11), 32–42.
Parasonis, J., Keizikas, A., and Kalibatiene, D. (2012). “The relationship between the shape of a building and its energy performance.” Archit. Eng. Des. Manage., 8(4), 246–256.
Raftery, P., Keane, M., and Costa, A. (2011a). “Calibrating whole building energy models: Detailed case study using hourly measured data.” Energy Build., 43(12), 3666–3679.
Raftery, P., Keane, M., and O'Donnell, J. (2011b). “Calibrating whole building energy models: An evidence-based methodology.” Energy Build., 43(9), 2356–2364.
Reddy, T. A. (2011). Applied data analysis and modeling for energy scientists and engineers, Springer, New York.
Reddy, T. A., Maor, I., and Panjapornpon, C. (2007a). “Calibrating detailed building energy simulation programs with measured data–Part I: General methodology (RP-1051).” HVAC&R Res., 13(2), 221–241.
Reddy, T. A., Maor, I., and Panjapornpon, C. (2007b). “Calibrating detailed building energy simulation programs with measured data–Part II: Application to three case study office buildings (RP-1051).” HVAC&R Res., 13(2), 243–265.
Tarlow, D., Peterman, A., Schwegler, B. R., and Trigg, C. (2009). “Automatically calibrating a probabilistic graphical model of building energy consumption.” Proc., 11th Int. IBPSA Conf.--Building Simulation, International Building Performance and Simulation Association (IBPSA), Glasgow, UK, 904-911.
University of Wisconsin. (2013). “A transient systems simulation program (TRNSYS).” Solar Energy Laboratory, Mechanical Engineering Department, University of Wisconsin, Madison, WI. 〈http://sel.me.wisc.edu/trnsys/〉
USDOE (U.S. Department of Energy). (2003). “Commercial Buildings Energy Consumption Survey (CBECS).” 〈http://www.eia.gov/consumption/commercial/data/2003/〉 (Mar. 3, 2014).
USDOE (U.S. Department of Energy). (2013). “EnergyPlus engineering reference: the reference to EnergyPlus calculations.” 〈http://apps1.eere.energy.gov/buildings/energyplus/pdfs/engineeringreference.pdf〉 (March 3, 2014).
USDOE (U.S. Department of Energy). (2014). “EnergyPlus Energy Simulation Software V8-0.” 〈http://apps1.eere.energy.gov/buildings/energyplus/〉. The other 2 programs’ references have been marked up in the text.
Wang, S., Yan, C., and Xiao, F. (2012). “Quantitative energy performance assessment methods for existing buildings.” Energy Build., 55, 873–888.
Information & Authors
Information
Published In
Journal of Architectural Engineering
Volume 22 • Issue 1 • March 2016
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Sep 19, 2014
Accepted: May 7, 2015
Published online: Dec 2, 2015
Published in print: Mar 1, 2016
Discussion open until: May 2, 2016
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.