Application of Fiber Reinforced Polymer Overlays to Extend Steel Fatigue Life
Publication: Journal of Composites for Construction
Volume 7, Issue 4
Abstract
An experimental and analytical study was conducted to investigate the effectiveness of applying carbon fiber reinforced polymer (CFRP) overlays to steel fatigue tension coupons to prolong fatigue life. Specimens were either notched or center hole specimens and tested in uniaxial tension. Variables studied were CFRP system, bond length, bond area, one and two sided applications, and applications prior or subsequent to crack propagation. Two sided applications were very effective, prolonging fatigue life by as much as 115%. Similar application of CFRP materials subsequent to crack propagation extended the remaining fatigue life by approximately 170% without any other means of crack arrest. The method therefore showed promise as both a preventive technique and repair method. The epoxy performance was critical to the effectiveness of the system, with all failures initiated by debonding of the CFRP. Overlays were most effective when the system was applied directly to the potential crack trajectory. One-sided applications introduced bending and did not significantly improve performance. CFRP materials with a moderate modulus of elasticity performed best. FEM was performed to estimate stress factors and effectiveness of overlays.
Get full access to this article
View all available purchase options and get full access to this article.
References
ASTM. (2000). “Standard test method of sharp notch tension testing of high strength sheet materials.” E-338-97, West Conshohocken, Pa.
Baker, A. A. (1997). “Growth characterization of fatigue cracks repaired with adhesively bonded boron/epoxy composite.” Advances in Fracture Research: Proc., 9th Int. Conf. on Fracture, April 1–5, Sydney, Australia, Pergamon, Amsterdam, 117–128.
Bassetti, A., Nussbaumer, A., and Hirt, M. (2000). “Fatigue life extension of riveted bridge members using prestressed carbon fiber composites.” Steel Structures of 2000’s, ECCS, Istanbul, Turkey, 11–13.
Lindeburg, M. (1992). Engineer in training reference manual, 8th Ed., Professional Publications, Belmont, Calif.
Lipson, C., and Juvinall, R. C. (1963). Handbook of stress and strength, MacMillian, New York.
Peterson, R. E. (1953). Stress concentration design factors, Wiley, New York.
Rao, V. V., Singh, R., and Malhotra, S. K.(1999). “Residual strength and fatigue life assessment of composite patch repaired specimens.” Composites, Part B, 30, 621–627.
Information & Authors
Information
Published In
Copyright
Copyright © 2003 American Society of Civil Engineers.
History
Received: Feb 22, 2002
Accepted: Jun 25, 2002
Published online: Oct 15, 2003
Published in print: Nov 2003
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.