Reliability of Shallow Foundations Subjected to Multidirectional Seismic Loading
Publication: Journal of Geotechnical and Geoenvironmental Engineering
Volume 132, Issue 6
Abstract
A method of assessing the probability of failure of shallow foundations in saturated fine-grained soil under multidirectional seismic loading is presented. The method uses the distributions of two variables, the spectral acceleration at the fundamental period of the structure and the shear strength of the foundation soil, to form the joint probability density function. The performance function, which defines the required soil strength for the foundation to equilibrate the applied loading, is mapped on this domain. Numerical integration is used to ascertain the probability of failure. A bounded probability density function is used, namely a Pearson Type 1 (Beta) distribution, for soil strength. This distribution provides an upper and lower limit to in situ shear strength. The spectral acceleration is represented by the complementary cumulative distribution function of a Type 1 asymptotic extreme value (Gumble) distribution. Such a distribution is shown to be an accurate representation of real earthquake loading and may be found by a probabilistic seismic hazard analysis for a region. The method is based on pseudostatic seismic loading of the foundation and accounts for spectral acceleration acting along the two horizontal axes. The influence of the orientation of the foundation to the earthquake source is incorporated using the concept of principal directions of ground motion. The performance function is formulated for shallow foundations under eccentric and inclined loading using the recommendations in Eurocode 7. The function is shown to be nonlinear and compound, one part pertaining to the bearing mode of failure (for lower values of acceleration) and the remaining part pertaining to the sliding mode of failure (for higher values of acceleration). An equation is presented for the transition acceleration that separates the performance function into the two parts. A case study is presented and conclusions are drawn about the role of the bearing and sliding modes of failure.
Get full access to this article
View all available purchase options and get full access to this article.
References
American Association of State Highway and Transportation Officials, Inc. (AASHTO). (2004). AASHTO LRFD bridge design specifications, 3rd Ed., Washington, D.C.
Baecher, R. E. (1999). Structural reliability analysis and prediction, 2nd Ed., Wiley, New York.
Bolton, M. D. (1993). “What are partial factors of safety for?” Proc., Int. Symp. on Limit State Design in Geotechnical Engineering, Vol. 3, Copenhagen, Denmark, 565–583.
California Department of Transportation (Caltrans). (2003). Bridge design specifications, Sacramento, Calif.
Cardoso, A. S., and Fernandes, M. M. (2001). “Characteristic values of ground parameters and probability of failure in design according to Eurocode 7.” Geotechnique, 51(6), 519–531.
Committee on Reliability Methods for Risk Mitigation in Geotechnical Engineering. (1995). Probabilistic methods in geotechnical engineering, National Academy of Sciences, Washington, D.C.
Donovan, N., and Bornstein, A. (1978). “Uncertainties in seismic risk procedures.” J. Geotech. Eng. Div., Am. Soc. Civ. Eng., 104(7), 869–887.
Duncan, J. M. (2000). “Factors of safety and reliability in geotechnical engineering.” J. Geotech. Geoenviron. Eng., 126(4), 307–316.
Ellingwood, B., Galambos, T. V., McGregor, J. G., and Cornell, C. A. (1980). Development of a probability based load criterion for American National Standard A58—Building code requirements for minimum design loads in buildings and other structures, National Bureau of Standards, Washington, D.C.
European Committee for Standardisation (CEN). (1993). “Part 1, Geotechnical design, general rules.” Eurocode 7, Brussels, Belgium.
Griffiths, D. V., and Fenton, G. A. (2001). “Bearing capacity of spatially random soil: The undrained clay Prandtl problem revisited.” Geotechnique, 51(4), 351–359.
Griffiths, D. V., Fenton, G. A., and Manoharan, N. (2002). “Bearing capacity of rough rigid strip footing on cohesive soil: Probabilistic study.” J. Geotech. Geoenviron. Eng., 128(9), 743–755.
Gumble, E. J. (1958). Statistics of extremes, Columbia University Press, New York.
Harr, M. E. (1977). Mechanics of particulate media, McGraw–Hill, New York.
Harr, M. E. (1987). Reliability based design in civil engineering, Dover, Mineola, N.Y.
International Conference of Building Officials (ICBO). (1997). “1997 uniform building code.” Structural Engineering Design Provisions, Vol. 2, Whittier, Calif.
Lopez, O. A., Chopra, A. K., and Hernandez, J. J. (2004). “Adapting the CQC3 rule for three seismic components with different spectra.” J. Struct. Eng., 130(3), 403–410.
Menun, C., and Der Kiureghian, A. (1998). “A replacement for the 30%, 40% and SRSS rules for multicomponent seismic analysis.” Earthquake Spectra, 14(1), 163–173.
Meyer, V. M. (1997). “Stress-strain and strength properties of an Auckland residual soil.” Ph.D. thesis, School of Engineering, Univ. of Auckland, New Zealand.
Meyerhof, G. G. (1995). “Development of limit state geotechnical design.” Can. Geotech. J., 32, 128–136.
Newmark, N. M. (1975). “Seismic design criteria for structures and facilities, Trans-Alaska pipeline system.” Proc., US National Conf. on Earthquake Engineering, Ann Arbor, Earthquake Engineering Research Institute, 94–103.
Penzien, J., and Watabe, M. (1975). “Characteristics of 3-dimensional earthquake ground motions.” Earthquake Eng. Struct. Dyn., 3, 365–373.
Phoon, K.-K., Kulhawy, F. H., and Grigoriu, M. D. (2003). “Development of a reliability based design framework for transmission line structure foundations.” J. Geotech. Geoenviron. Eng., 129(9), 798–806.
Rosenblueth, E., and Contreras, H. (1977). “Approximate design for multicomponent earthquakes.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 103(5), 881–893.
Scott, B., Kim, B. J., and Salgado, R. (2003). “Assessment of current load factors for use in geotechnical load and resistance factor design.” J. Geotech. Geoenviron. Eng., 129(4), 287–295.
Stirling, M. W., McVerry, G. H., and Berryman, K. R. (2002). “A new seismic hazard model for New Zealand.” Bull. Seismol. Soc. Am., 92(5), 1878–1903.
Information & Authors
Information
Published In
Journal of Geotechnical and Geoenvironmental Engineering
Volume 132 • Issue 6 • June 2006
Pages: 685 - 693
Copyright
© 2006 ASCE.
History
Received: Dec 7, 2004
Accepted: Nov 30, 2005
Published online: Jun 1, 2006
Published in print: Jun 2006
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.