Strut-and-Tie Design Methodology for Three-Dimensional Reinforced Concrete Structures
Publication: Journal of Structural Engineering
Volume 132, Issue 6
Abstract
A strut-and-tie design methodology is presented for three-dimensional reinforced concrete structures. The unknown strut-and-tie model is realized through the machinery of a refined evolutionary structural optimization method. Stiffness of struts and ties is computed from an evolved topology of a finite element model to solve statically indeterminate strut-and-tie problems. In addition, compressive strength for struts and nodal zones is evaluated using Ottosen’s four-parameter strength criterion. Numerical examples are studied to demonstrate that the proposed design methodology is suitable for developing and analyzing three-dimensional strut-and-tie models for reinforced concrete structures.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgment
This research was supported by the National Science Council of the Republic of China through Grant No. UNSPECIFIEDNSC 91-2211-E-002-078.
References
Adebar, P., Kuchma, D., and Collins, M. P. (1990). “Strut-and-tie models for the design of pile caps: An experimental study.” ACI Struct. J., 87(1), 81–92.
Ali, M. A. (1997). “Automatic generation of truss models for the optimal design of reinforced concrete structures.” Ph.D. thesis, Cornell Univ., Ithaca, N.Y.
Ali, M. A., and White, R. N. (2001). “Automatic generation of truss model for optimal design of reinforced concrete structures.” ACI Struct. J., 98(4), 431–442.
American Concrete Institute (ACI) Committee 318. (2002). “Building code requirements for structural concrete.” ACI 318-02, Farmington Hills, Mich.
American Society for Civil Engineers – American Concrete Institute (ASCE-ACI) Committee 445. (1998). “Recent approaches to shear design of structural concrete.” J. Struct. Eng., 124(12), 1375–1417.
Biondini, F., Bontempi, F., and Malerba, P. G. (2001). “Stress path adapting strut-and-tie models in cracked and uncracked R.C. elements.” Struct. Eng. Mech., 12(6), 685–698.
Chen, W. F. (1982). Plasticity in reinforced concrete, McGraw–Hill Inc., Singapore.
Cook, R. D., Malkus, D. S., Plesha, M. E., and Witt, R. J. (2002). Concepts and applications of finite element analysis, 4th Ed., Wiley, New York.
Fédération Internationle de la Précontrainte (FIP). (1996). Recommendation—Practical design of structural concrete, London.
Fédération Internationale Du Béton (FIB). (2002). “Design examples for the 1996 FIP recommendations—Practical design of structural concrete.” Technical Rep., International Federation for Structural Concrete (fib), London.
Hinton, E., and Sienz, J. (1995). “Fully stressed topological design of structures using an evolutionary procedure.” Eng. Comput., 12(2), 229–244.
Hsu, T. T. C. (1993). Unified theory of reinforced concrete, CRC Press, Boca Raton, Fla.
Huang, C. W. (2003). “Theory and software development of strut-and-tie models by using topology optimization techniques.” Ph.D. thesis, National Taiwan Univ., Taipei, Taiwan (in Chinese).
Kupfer, H., and Gerstle, K. H. (1973). “Behavior of concrete under biaxial stresses.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 99(4), 853–866.
Li, Q., Steven, G. P., and Xie, Y. M. (2001). “A simple checkerboard suppression algorithm for evolutionary structural optimization.” Struct. Multidiscip. Optim., 22(3), 230–239.
Liang, Q. Q., and Steven, G. P. (2002). “A performance-based optimization method for topology design of continuum structures with mean compliance constraints.” Comput. Methods Appl. Mech. Eng., 191(13–14), 1471–1489.
Liang, Q. Q., Uy, B., and Steven, G. P. (2002). “Performance-based optimization for strut-tie modeling of structural concrete.” J. Struct. Eng., 128(6), 815–823.
Liang, Q. Q., Xie, Y. M., and Steven, G. P. (2000). “Topology optimization of strut-and-tie models in reinforced concrete structures using an evolutionary procedure.” ACI Struct. J., 97(2), 322–330.
MacGregor, J. G. (1997). Reinforced concrete mechanics and design, 3rd Ed., Prentice-Hall, Upper Saddle River, N.J.
Ottosen, N. S. (1977). “A failure criterion for concrete.” J. Eng. Mech. Div., Am. Soc. Civ. Eng., 103(4), 527–535.
Schlaich, J., and Schäfer, K. (1991). “Design and detailing of structural concrete using strut-and-tie models.” Struct. Eng., 69(6), 113–125.
Schlaich, J., Schäfer, K., and Jennewein, M. (1987). “Toward a consistent design of structural concrete.” PCI J., 32(3), 75–150.
Tjhin, T. N., and Kuchma, D. A. (2002). “Computer-based tools for design by strut-and-tie method: Advances and challenges.” ACI Struct. J., 99(5), 586–594.
Xie, Y. M., and Steven, G. P. (1993). “A simple evolutionary procedure for structural optimization.” Comput. Struct., 49(5), 885–896.
Yun, Y. M. (2000). “Computer graphics for nonlinear strut-tie model approach.” J. Comput. Civ. Eng., 14(2), 127–133.
Zhao, C., Hornby, P., Steven, G. P., and Xie, Y. M. (1998). “A generalized evolutionary method for numerical topology optimization of structures under static loading conditions.” Struct. Optim., 15(3/4), 251–260.
Information & Authors
Information
Published In
Copyright
© 2006 ASCE.
History
Received: Sep 5, 2003
Accepted: Jun 3, 2005
Published online: Jun 1, 2006
Published in print: Jun 2006
Notes
Note. Associate Editor: Elisa D. Sotelino
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.