Increased Damping in Cantilevered Traffic Signal Structures
Publication: Journal of Structural Engineering
Volume 126, Issue 4
Abstract
Dynamic characteristics of a traffic signal structure were determined experimentally. Various strategies were investigated to provide additional damping. By decreasing the magnitude and the number of fatigue cycles caused by wind-induced oscillations, the service life is expected to be extended. Several damping devices were investigated and tested. The free-vibration response was used to determine the in- and out-of-plane damping of a full-scale pole with and without dampers. The dampers included elastomeric pads located within the joints, several impact dampers, tuning-mass systems, and a mechanical shock absorber (with a strut) positioned between the luminaire extension and the mast arm. An elastomeric pad located at the pole foundation connection and the shock absorber exhibited the most damping and were considered viable and practical options. The construction characteristics of each damper were noted.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Abdel-Rohman, M. (1994). “Design of tuned mass dampers for suppression of Galloping in tall prismatic structures.” J. Sound and Vibration, 171, 289–299.
2.
Bapat, C. N., and Sankar, S. (1985). “Single unit impact damper in free and forced vibration.” J. Sound and Vibration, 99, 85–94.
3.
Beards, C. F. (1983). Structural vibration analysis. Wiley, New York.
4.
Hirsch, G. H. ( 1994). “Damping measures to control wind-induced vibrations.” CISM courses and lectures no. 335, Wind-excited vibrations of Structures, H. Sockel, ed., Springer, New York, 1–50.
5.
House, J. R. (1989). “Damping hollow tubular structures with `lightweight' viscoelastic spheres.” Rep. BH16 6JU, Admiralty Research Establishment, Portsmouth, England.
6.
Jo, I., Kaneko, T., Nagastu, S., Chiyomaru, T., and Kimura, M. (1989). “Development of highway light pole with resistance to wind vortex-induced oscillations.” Kawasaki Steel Tech. Rep. No. 21, Kawasaki Steel Corporation, Tokyo, 86–94.
7.
Kaczinski, M. R., Dexter, D. J., and Van Dien, J. P. (1996). Fatigue-resistant design of cantilevered signal, sign and light supports. ATLSS Engineering Research Center, Lehigh University, Bethlehem, Pa.
8.
McDonald, J. R., Metha, K. C., Oler, W. W., and Pulipaka, N. (1995). “Wind load effects on signs, luminaires and traffic signal structures.” Res. Study No. 11-5-92-1303, Texas Tech University, Lubbock, Tex.
9.
Mike, C., Fisher, J. W., and Slutter, R. G. (1981). “Fatigue behavior of steel light-poles,” Lehigh University, Rep. No. FHWA/CA/SD-81/82, California Department of Transportation, Sacramento, Calif.
10.
Minor, R. C. (1973). “Damp destructive pole vibration.” Electric Light and Power, December.
11.
Riggs, G. S. ( 1998). “Increased damping in cantilevered traffic signal structures,” Masters thesis, University of Wyoming, Laramie.
12.
Unger, E. E., and Kerwin, E. M. (1964). “Plate damping due to thickness deformations in attached viscoelastic layers.” J. Acoustical Soc. Am., 36, 386–392.
13.
Yamaguchi, H., and Harnpornchai, N. (1993). “Fundamental characteristics of multiple tuned mass dampers for suppressing harmonically forced oscillations,” Earthquake Engrg. and Struct. Dyn., 22, 51–62.
14.
Yi, S., and Ahmad, M. F., and Hilton, H. H. (1996). “Dynamic responses of plates with viscoelastic free layer damping treatment.” J. Vibration and Acoustics, 118, 362–367.
Information & Authors
Information
Published In
Journal of Structural Engineering
Volume 126 • Issue 4 • April 2000
Pages: 530 - 537
History
Received: Jan 12, 1999
Published online: Apr 1, 2000
Published in print: Apr 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.