Seismic Safety of Gravity Dams: From Shake Table Experiments to Numerical Analyses
Publication: Journal of Structural Engineering
Volume 126, Issue 4
Abstract
The purpose of this paper is to present shake table experiments conducted on four 3.4-m-high plain concrete gravity dam models to study their dynamic cracking and sliding responses. The experimental results are then compared with a smeared cracked finite-element simulation using a nonlinear concrete constitutive model based on fracture mechanics. For the sliding mechanism, the numerical simulations use rigid body dynamics with frictional strength derived from the Mohr-Coulomb criterion. From the cracking tests, it is shown that a single triangular acceleration pulse could initiate and propagate a crack. The numerical correlation with the observed response is good. However, viscous damping varies experimentally from 1% in an uncracked situation to over 20% in a partially cracked case. For the sliding mechanism when the critical acceleration is exceeded, it is shown experimentally that sliding could occur due to a single triangular acceleration pulse. For actual seismic records, the cumulative sliding displacement for a given peak ground acceleration due to low frequency western North American records can be 3–4 times larger than the corresponding sliding displacements due to high frequency eastern records. For simplified pseudostatic or pseudodynamic sliding analyses, the concept of an effective acceleration is developed.
Get full access to this article
View all available purchase options and get full access to this article.
References
1.
Ayari, M., and Saouma, V. (1990). “A fracture mechanics approach seismic analysis of concrete gravity dams using discrete cracks.” Engrg. Fracture Mech., 35, 587–598.
2.
Bakhtin, B. M., and Dumenko, V. I. (1979). “Seismic stability of a concrete gravity dam having a lightweight profile.” Hydrotechnical Cosntr., 5, 445–450.
3.
Bazant, Z., and Ho, B. H. (1983). “Crack band theory for fracture of concrete.” Mat. and Struct., Paris, 16, 155–177.
4.
Bhattacharjee, S. (1996). “FRAC _DAM: A finite element analysis computer to predict fracture and damage responses of solid concrete structures.” Rep. No. EPM/GCS 1996-03, Dept. of Civ. Engrg., École Polytechnique, Montreal.
5.
Bhattacharjee, S., and Léger, P. (1993). “Seismic cracking and energy dissipation in concrete gravity dams.” Earthquake Engrg. and Struct. Dyn., 22, 991–1007.
6.
Bhattacharjee, S. S., and Léger, P. (1994). “Applications of NLFM models to predict cracking in concrete gravity dams.”J. Struct. Engrg., ASCE, 120(4), 1255–1271.
7.
BRE. (1991). “An engineering guide to seismic risks to dams in the United Kingdom.” BRE Publ. Rep. No. 210, Building Research Establishment, Graston, Watford, U.K.
8.
Bruhwiler, E., and Wittmann, F. H. (1990). “Failure of concrete subjected to seismic loading conditions.” Engrg. Fracture Mech., 35(1/2/3), 565–571.
9.
CDSA. ( 1995). “Dam safety guidelines.” Canadian Dam Safety Association, Edmonton, Alta., Canada.
10.
CEA. (1990). “Safety assessment of existing dams for earthquake conditions.” Vol. C-4, Seismic Analysis of Concrete Dams, CEA Rep. No. 420 G 547, Canadian Electricity Association, Montreal.
11.
CEA. (1998). “Structural safety of existing concrete dams—Influence of construction joints. Final Report.” Volume A—Review of the literature and background material, and Volume B—Theoretical and numerical development and case studies, CEA Rep. No. 9032 G 905, Prepared by École Polytechnique, Montreal, Canadian Electricity Association, Montreal.
12.
CEB-FIP. ( 1990). “Model code—Information bulletin 203.” Comité Euro-International du Béton-Fédération Internationale de la précontrainte, Permanent Secretariat, Lausanne, Switzerland.
13.
Cervera, M., Oliver, J., and Faria, R. (1995). “Seismic evaluation of concrete dams via continuum damage models.” Earthquake Engrg. and Struct. Dyn., 24, 1225–1245.
14.
Cipolla, G. ( 1998). “Effect of lift joints on the seismic response of concrete gravity dams: Shake table tests and numerical analyses,” MS thesis, Dept. of Civ. Engrg., École Polytechnique, Montreal (in French).
15.
Donlon, W. P., and Hall, J. F. (1991). “Shake table study of concrete gravity dam monoliths.” Earthquake Engrg. and Struct. Dyn., 20, 769–786.
16.
Earthquake engineering for concrete dams: Design, performance and research needs. (1990). National Academy Press, Washington, D.C.
17.
El-Aidi, B., and Hall, J. F. (1989). “Nonlinear earthquake response of concrete gravity dams, part 1: Modelling,” and “part 2: Behavior.” Earthquake Engrg. and Struct. Dyn., 18, 837–865.
18.
Feltrin, G., Wepf, D., and Bachmann, H. (1990). “Seismic cracking of concrete gravity dams.” Rep. No. 0119-2, Dam Engrg., 1(4), 279–289.
19.
FERC. ( 1991). “Engineering guidelines for the evaluation of hydropower projects.” Federal Energy Regulatory Commission, Washington, D.C.
20.
Fronteddu, L., Léger, P., and Tinawi, R. (1998). “Static and dynamic behavior of concrete lift joint interfaces.”J. Struct. Engrg., ASCE, 124(12), 1418–1430.
21.
Ghrib, F., and Tinawi, R. (1995). “An application of damage mechanics for seismic analysis of concrete gravity dams.” Earthquake Engrg. and Struct. Dyn., 24, 157–173.
22.
Hall, J. F. (1989). “The dynamic and earthquake behaviour of concrete dams.” Soil Dyn. and Earthquake Engrg., 7, 58–121.
23.
ICOLD. ( 1983). “Seismicity and dam design.” Bull. 46, International Commission on Large Dams, Paris.
24.
ICOLD. ( 1986). “Earthquake analysis procedures for dams—State-of-the-art.” Bull. 52, International Commission on Large Dams, Paris.
25.
ICOLD. ( 1989). “Selecting seismic parameters for large dams.” Bull. 72, International Commission on Large Dams, Paris.
26.
ICOLD. ( 1998). “World register of dams.” Computerised version, International Commission on Large Dams, Paris.
27.
Knight, D. J., and Mason, P. J. (1992). “Lessons from the effect of earthquakes on dams.” Water Power and Dam Constr., 44(3), 44–46.
28.
Lee, J., and Fenves, G. (1998). “A plastic-damage concrete model for earthquake analysis of dams.” Earthquake Engrg. and Struct. Dyn., 27, 937–956.
29.
Lin, G., Zhou, J., and Fan, C. (1993). “Dynamic model rupture test and safety evaluation of concrete gravity dams.” Dam Engrg., IV(3), 769–786.
30.
Mir, R. A., and Taylor, C. A. (1995). “An experimental investigation into earthquake-induced failure of medium to low height concrete gravity dams.” Earthquake Engrg. and Struct. Dyn., 24, 373–393.
31.
Mir, R. A., and Taylor, C. A. (1996). “An investigation into the base sliding response of rigid concrete gravity dams to dynamic loading.” Earthquake Engrg. and Struct. Dyn., 25, 79–98.
32.
Mitchell, D., Tinawi, R., and Law, T. (1990). “Damage caused by the November 25, 1998 Saguenay earthquake.” Can J. Civ. Engrg., Ottawa, 17(3), 338–365.
33.
Newmark, N. M. (1965). “Effects of earthquakes on dams and embankments.” Géotechnique, London, 15, 139–160.
34.
USACE. (1995). “Engineering and design, gravity dams.” Rep. EM 1110-2-2200, U.S. Army Corps of Engineers, Washington, D.C.
35.
USCOLD. (1992). “Observed performance of dams during earthquakes.” Rep. issued by the Committee on Earthquakes, United States Commission on Large Dams, Denver.
36.
Westergaard, H. M. (1933). “Water pressure on dams during earthquakes.” Trans. ASCE, 98, 418–472.
37.
Zadnik, B. (1994). “Motions of rigid unsymmetric bodies and coefficient of friction by earthquake excitations.” Struct. Engrg. and Mech., 2(3), 257–267.
38.
Zadnik, B., and Paskalov, T. (1992). “Dam stability and time-dependent coefficient of friction.” Proc., 10th World Conf. on Earthquake Engrg., Balkema, Rotterdam, The Netherlands, 4633–4638.
Information & Authors
Information
Published In
History
Received: Jan 28, 1999
Published online: Apr 1, 2000
Published in print: Apr 2000
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.