Effect of Safety and Environmental Variables on Task Durations in Steel Erection
Publication: Journal of Construction Engineering and Management
Volume 131, Issue 12
Abstract
In spite of the efforts by government agencies, labor organizations, and researchers in the field of health and safety, injuries and fatalities continue to affect the construction industry. In 2002 the construction industry had the undesirable distinction of having two of the most dangerous occupations in the United States, with fatalities among structural steel workers at 58.2 per 100,000 workers (fourth highest rate) and among construction laborers at 27.7 per 100,000 workers (ninth highest rate). Costs associated with construction accidents, such as increased insurance premiums and medical expenses, and loss of productivity are also concerns in the industry. It has not been demonstrated how unsafe working conditions affect worker performance, and the impact of unsafe work practices on worker performance has not been quantified. This paper describes a methodology that included direct observation of steel erection activities and statistical analysis of task duration data. The data collected at steel erection sites included safety conditions such as the use of personal protective equipment (PPE), elevation of the work area, environmental conditions such as temperature and humidity, and worker performance in the form of task durations. Analysis of variance (ANOVA) analysis of 186 of steel erection task durations collected over a six-month period showed that the use of personal protective equipment (PPE), the time of day during which the operation was being performed, the elevation at which the work was being performed, and the presence of decking below the work area had statistically significant effects on the durations of steel erection tasks.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
The authors would like to express their thanks to the following individuals and companies for their collaboration on this study: Dave Murphy and Terry Hass of Pepper Construction, Nathan Crowell of Wilhelm Construction, Bruce Boyd of Kettlehut Construction, Bill Mott of Hunt Construction, and Jim Brown of the Associated General Contractors of America (Indianapolis).
References
Abdelhamid, T. S., and Everett, J. G. (2000). “Identifying root causes of construction accidents.” J. Constr. Eng. Manage., 126(1), 52–60.
Bureau of Labor Statistics (BLS). (2002). National census of fatal occupational injuries in 2001, U.S. Department of Labor, Washington, D.C.
Coble, R. J., Hinze, J., and Haupt, T. C. (2000). Construction safety and health management, Prentice Hall, Englewood Cliffs, N.J.
Culvert, C., Florczak, G., Castell, R., Jr., Pelton, G., and Connolly, C. (1990). “Analysis of construction fatalities—The OSHA data 1985–1988.” Rep., Occupational Safety and Health Administration, U.S. Department of Labor, Washington, D.C.
Culvert, C., Marshall, M., and Connolly, C. (1992). “Construction accidents: The workers compensation data base, 1985–1988.” Rep., Occupational Safety and Health Administration, U.S. Department of Labor, Washington, D.C.
Davies, V. J., and Tomasin, K. (1990). Construction safety handbook. Thomas Telford, London.
Fullman, J. B. (1984). Construction safety, security, and loss prevention. Wiley, New York.
Goldsmith, D. (1987). Safety management in construction and industry. McGraw-Hill, New York.
Helander, M. G. (1991). “Safety hazards and motivation for safe work in the construction industry.” Int. J. Ind. Ergonom., 8(4), 205–223.
Hinze, J. W. (1997). Construction safety, Prentice Hall, Englewood Cliffs, N.J.
Hoonakker, P. L. T., Loushine, T., Kallman, J., Carayon, P., Kapp, A., and Smith, M. J. (2003). “Accidents, injuries, workers’ compensation, safety and safety policy in construction industry: The effort/results paradox.” Int. Ergonomics Association (IEA) Conf., Seoul, Korea.
Huang, X., and Hinze, J. (2003). “Analysis of construction worker fall accidents.” J. Constr. Eng. Manage., 129(3), 262–271.
La Bete, C. R. (1990). “Innovative procedures in construction safety.” Professional Safety, 35(4), 35–39.
Lytle, A. M., Saidi, K. S., Stone, W. C., and Gross, J. L. (2002). “Report of the National Institute of Standards and Technology (NIST) on Automated Steel Construction.” Proc., Int. Symp. on Automation and Robotics in Construction, 19th (ISARC), National Institute of Standards and Technology, Gaithersburg, Md, 247–253.
MacCollum, D. V. (1990). “Time for change in construction safety.” Professional Safety, 35(2), 17–20.
Meilinger, F. (2001). “Protecting ironworkers.” Job Safety and Health Quarterly, 13(1), 26–28.
Neter, J., et al. (1996). Applied linear statistical models, 4th Ed., McGraw-Hill, Burr Ridge, Ill.
Peyton, R. X., and Rubio, T. C. (1991). Construction safety practices and principles, Van Nostrand-Reinhold, New York.
Rietze, R. B. (1990). “Proactive construction management.” Professional Safety, 35(1), 14–16.
SAS Institute Inc., SAS version 8 user reference manual, Cary, N.C.
Slaughter, E. S., and Eraso, M. (1997). “Simulation of structural steel erection to assess innovations.” IEEE Trans. Eng. Manage., 44(2), 196–207.
Smith, S. D. (1999). “Earthmoving productivity estimation using linear regression techniques.” J. Constr. Eng. Manage., 125(3), 133–141.
Toole, T. M. (2002a). “Comparison of site safety policies of construction industry trade groups.” Pract. Period. Struct. Des. Constr., 7(2), 90–95.
Toole, T. M. (2002b). “Construction site safety roles.” J. Constr. Eng. Manage., 128(3), 203–210.
Trochim, W. M. K. (2001). The research methods knowledge base, Atomic Dog, Cincinnati, Ohio.
U.S. Department of Labor. (2001). “Occupational safety and health standards for the construction industry.” 29 CFR 1926 Occupational Safety and Health Administration, U.S. Government Printing Office, Washington, D.C.
Information & Authors
Information
Published In
Copyright
© 2005 ASCE.
History
Received: May 25, 2004
Accepted: May 16, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.