Mixed Reality-Based Visualization Interfaces for Architecture, Engineering, and Construction Industry
Publication: Journal of Construction Engineering and Management
Volume 131, Issue 12
Abstract
Varied computing devices and automated sensors will enable new human-computer interface paradigms for interacting with digitally managed project information. The writers therefore propose the development of Mixed Reality (MR)-based computer interfaces, and especially Augmented Reality systems, for the architecture, engineering, and construction industry and describe the technologies and principles for applying such computer interfaces to support all phases of the constructed facility project life cycle. An Augmented Reality computer-aided drawing prototype is described as an experimental platform to study the human factors issues in interacting with Augmented Reality three-dimensional digital design models. Two critical research needs are cited for realizing effective Augmented Reality systems: (1) human factors research for development of visualization tools to enhance design comprehension and support collaborative work, and (2) the development of a technology infrastructure for “augmented” control and inspection interfaces to directly access digital project plan and site information that may be spatially referenced and displayed in the field. Research should be geared to advance knowledge regarding spatial cognition, human–computer interfaces, and computer-mediated human-to-human interactions, and it should address application of MR to all phases of the project life cycle.
Get full access to this article
View all available purchase options and get full access to this article.
Acknowledgments
This research was initiated through funding from the University of Washington through a Presidential Faculty Development Fellowship and has continued by support from the National Science Foundation under Grant No. NSFCMS-0239091. Opinions, findings, conclusions, or recommendations presented in this paper are those of the writers and do not necessarily reflect the views of the National Science Foundation. The cooperation of the McKinstry Company of Seattle, Washington in support of the development of AR CAD is also acknowledged.
References
Applewhite, H. (1991). “Position tracking in virtual reality.” Proc., Virtual Reality ’93. Beyond the Vision: The Technology, Research, and Business of Virtual Reality, Westport, Conn., 1–8.
Azuma, R. T. (1997). “A survey of augmented reality.” Presence: Teleoperators and virtual environments, Vol. 6, No. 4, MIT Press, Cambridge, Mass., 355–385.
Azuma, R. T., and Bishop, G. (1994). “Improving static and dynamic registration in an optical see-through HMD.” Proc., of SIGGRAPH 95, ACM, New York, 197–204.
Bauer, M. and Siegel, J., and (1998). “Information integration for field workers and office-based professionals: 3 cases studies.” Information and process integration in enterprises: Rethinking documents, T. Wakayama et al., ed., Kluwer Academic, Boston, 95–108.
Beliveau, Y. J., Williams, J. M., King, M. G., and Niles, A. R. (1995). “Real-time position measurement integrated with CAD: Technologies and their protocols.” J. Constr. Eng. Manage., 121(4), 346–354.
Billinghurst, M., Bowskill, J., Dyer, N., and Morphett, J. (1998). “An evaluation of wearable information spaces.” Proc., IEEE Virtual Reality and Artificial Intelligence Symp. (VRAIS 98), IEEE CS Press, Los Alomitos, Calif., 20–27.
Billinghurst, M., and Starner, T. (1999). “Wearable devices: new ways to manage information.” Computer, 32(1), 57–64.
Campbell, D. A. (2000). “Architectural construction documents on the web: VRML as a case study.” Autom. Constr., 9(1), 129–138.
Donath, D., Beetz, J., Grether, K., Petzold, F., and Seichter, H. (2001). “Augmented reality techniques for design and revitalization in existing built environments.” Proc., 21st Annual Conf. of the Association for Computer-Aided Design in Architecture, Buffalo, N.Y., 322–329.
Dunston, P. S., Billinghurst, M., Luo, Y., and Hampson, B. (2000). “Virtual visualization for the mechanical trade.” Proc., 17th International Symp. on Automation and Robotics in Construction (ISARC 2000), National Taiwan Univ., Taiwan, 1131–1136.
Dunston, P. S., Wang, X., Billinghurst, M., and Hampson, B. (2002). “Mixed reality benefits for design perception.” Proc., 19th International Symp. on Automation and Robotics in Construction (ISARC 2002), William Stone, ed., NIST Special Publication 989, Gaithersburg, Md., 191–196.
Faye, E. L., and Wickens, C. D. (1995). “Strategies for display integration in navigational guidance and situation awareness.” ARL-95-4/NASA-95-1, Aviation Research Laboratory, Institute of Aviation, Univ. of Illinois at Urbana-Champaign, Urbana-Champaign, Ill.
Ferrin, F. J. (1991). “Survey of helmet tracking technologies.” Proc., of Large-Screen Projection, Avionic, and Helmet-Mounted Displays, SPIE, Bellingham, Wash., 86–94.
Fu, M. C., and East, W. E. (1999). “Virtual design review.” Comput. Aided Civ. Infrastruct. Eng., Blackwell Publishing, 14(1), 25–35.
Gorham, B. (1999). “A new optical technique for machine guidance.” Proc., 16th International Symp. on Automation and Robotics in Construction, International Association for Automation and Robotics in Construction, (IAARC), Madrid, Spain, 651–656.
Hadikusumo, B. H. W., and Rowlinson, S. (2002). “Integration of virtually real construction model and design-for-safety-process database.” Autom. Constr., 11(5), 501–509.
Hammad, A., Garrett, J. H., and Karimi, H. A. (2002). “Potential of mobile augmented reality for infrastructure field tasks.” Proc., 7th Int. Conf. on Applications of Advanced Technologies in Transportation, K. C. Wang, S. Madanat, S. Nambisan, and G. Spring, eds., ASCE, Reston, Va., 425–432.
Holloway, R., and Lastra, A. (1995). “Virtual environments: A survey of the technology.” SIGGRAPH’95 Course, 8(A), 1–40.
Hovestadt, V., and Hovestadt, L. (1999). “The ARMILLA project.” Autom. Constr., 8(3), 325–333.
Kensek, K., Noble, D., Schiler, M., and Tripathi, A. (2000). “Augmented reality: An application for architecture.” Proc., 8th Int. Conf. on Computing in Civil and Building Engineering, R. Fruchter, F. Peña-Mora, and W. M. K. Roddis, eds., ASCE, Reston, Va., 294–301.
Kumi, T. A., and Retik, A. (1997). “A library-based 4D visualization of construction processes.” Proc., IEEE International Conf. on Information Visualization (IV’97), London, 315–321.
Leinonen, J., and Kähkönen, K. (2000). “New construction management practice based on the virtual reality technology.” Proc., Construction Congress VI: Building Together for a Better Tomorrow in an Increasingly Complex World, K. D. Walsh, ed., ASCE, Reston, Va., 1014–1022.
Liston, K., Fischer, M., and Kunz, J. (2000). “Designing and evaluating visualization techniques for construction planning.” Proc., 8th Int. Conf. on Computing in Civil and Building Engineering (ICCCBE-VIII), R. Fruchter, F. Pena-Mora, and W. M. Kim Roddis, eds., ASCE, Reston, Va., 1293–1300.
Maruyama, Y., Iwase, Y., Koga, K., Yagi, J., Takada, H., Sunaga, N., Nishigaki, S., Ito, T., and Tamaki, K. (2000). “Development of virtual and real-field construction management systems in innovative, intelligent field factory.” Autom. Constr., 9(5–6), 503–514.
Meyer, K., Applewhite, H. L., and Biocca, F. A. (1992). “A survey of position-trackers.” Presence: Teleoperators and virtual environments, Vol. 1(2), MIT Press, Cambridge, Mass., 173–200.
Milgram, P., and Colquhoun, H. Jr. (1999). “A taxonomy of real and virtual world display integration.” Mixed reality: Merging real and virtual worlds, Y. Ohta and H. Tamura, eds., Ohmsha Ltd. and Springer, New York, 5–30.
Milgram, P., and Kishino, F. (1994). “A taxonomy of mixed reality visual displays.” IEICE Trans. Inf. Syst., E77-D(12), 1321–1329.
Milgram, P., Takemura, H., Utsumi, A., and Kishino, F. (1994). “Augmented reality: A class of displays on the reality-virtuality continuum.” Proc. SPIE, 2351, 282–292.
Murray, N., Fernando, T., and Aouad, G. (2000). “A virtual environment for building construction.” Proc., 17th Int. Symp. on Automation and Robotics in Construction (ISARC 2000), National Taiwan Univ., Taipei, Taiwan, 1137–1142.
Naji, K. K. (2000). “Simulating equipment-based construction operations using virtual environments.” Proc., 17th Int. Symp. on Automation and Robotics in Construction (ISARC 2000), National Taiwan Univ., Taipei, Taiwan, 1125–1130.
Navab, N. et al. (2002). “Registration of technical drawings and calibrated images for industrial Augmented Reality.” Mach. Vision Appl., 13, 111–118.
Oxman, R. (2000). “Design media for the cognitive designer.” Autom. Constr., 9(4), 337–346.
Roberts, G. W., Evans, A., Dodson, A., Denby, B., Cooper, S., and Hollands, R. (2002). “Look beneath the surface with augmented reality.” GPS world, 14–20 ⟨http://www.gpsworld.com/gpsworld/⟩ (February).
Sankar, J. (1997). “Virtual reality.” Comput.-Aided Des., 29(8), 543–545.
Seigel, J., and Bauer, M. (1997). “A field usability evaluation of a wearable system.” Proc., 1st Int. Symp. on Wearable Computers, Digest of Papers, IEEE Computer Society, Los Alamitos, Calif., 18–22.
Shen, J., Wu, Y., and Liu, H. (2001). “Urban planning using augmented reality.” J. Urban Plann. Dev., 127(3), 118–125.
Sholl, M. J. (1995). “The representation and retrieval of map and environment knowledge.” Geogr. Systems, 2, 177–195.
State, A., Hirota, G., Chen, D. T., Garrett, B., and Livingston, M. (1996). “Superior augmented reality registration by integrating landmark tracking and magnetic tracking.” Proc., SIGGRAPH’96, New Orleans, 429–438.
Thomas, B., Piekarski, W., and Gunther, B. (1999). “Using augmented reality to visualize architecture designs in an outdoor environment.” Proc., Design Computing on the Net 1999, Sydney, New South Wales, Australia.
Tversky, B., Lee, P., and Mainwaring, S. (1999). “Why do speakers mix perspectives.” Spatial Cognition and Computation. Kluwer, 1(4), 399–412.
Wang, X. (2002). “Cognition cost of viewer assistant augmented reality for computer aided drawing.” Master thesis, Univ. of Washington, Seattle, Wash.
Webster, A., Feiner, S., MacIntyre, B., Massie, W., and Krueger, T. (1996). “Augmented reality in architectural construction, inspection, and renovation.” Proc., ASCE Computing in Civil Engineering, J. Vanegas and Paul Chinowsky, eds., ASCE, Reston, Va., 913–919.
Wickens, C. D. (1995). “Integration of navigational informationfor flight.” ARL-95-11/NASA-95-5, Aviation Research Lab, Institute of Aviation, Univ. of Illinois at Urbana-Champaign, Urbana Champaign, Ill.
Wickens, C. D. (1999). “Frame of reference for navigation.” Attention and performance, D. Gopher and A. Koriat, eds., Vol. 16, Academic, New York, 113–144.
Information & Authors
Information
Published In
Journal of Construction Engineering and Management
Volume 131 • Issue 12 • December 2005
Pages: 1301 - 1309
Copyright
© 2005 ASCE.
History
Received: Sep 23, 2004
Accepted: May 18, 2005
Published online: Dec 1, 2005
Published in print: Dec 2005
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.