Cyclic Lateral Load Test for RC Moment Frames Retrofitted with External Steel Frames
Publication: Journal of Structural Engineering
Volume 149, Issue 5
Abstract
A seismic retrofit method using external steel frames was studied for old RC buildings with nonseismic details. To verify the external retrofit method, 2-story frame specimens were tested under cyclic lateral loading. The test results indicated that the external steel frame successfully enhanced the stiffness and strength of deficient RC moment frames without deteriorating the deformation capacity. The energy-dissipation capacity was also improved by restraining early failure of the RC beam-column joints. The failure mode of the retrofitted frames was governed by the flexural mechanism of the first-story RC columns, with partial yielding of the upper structure. The RC columns were subjected to additional axial forces that were transferred from the external steel frame, in which the steel columns were not extended to the foundation. The strengths of retrofitted frames were evaluated by two approaches based on the frame plastic hinge mechanism: (1) the sum of the strengths of independent RC and steel moment frames, and (2) the strength assuming full composite section of concrete and steel members. On the basis of the test results, design considerations for the external steel frame-retrofitting method are recommended.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or code that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The financial support of CTS Engineering Ltd. is greatly appreciated.
References
ACI (American Concrete Institute). 2005. Acceptance criteria for moment frames based on structural testing and commentary. ACI 374.1-05. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete. ACI 318-19. Farmington Hills, MI: ACI.
ACI-ASCE (American Concrete Institute-ASCE). 2002. Recommendations for design of beam-column connections in monolithic reinforced concrete structures. ACI 352R-02. Farmington Hills, MI: ACI.
AISC (American Institute of Steel Construction). 2016. Specification for structural steel buildings. ANSI/AISC 360-16. Chicago: AISC.
Ishimura, M., K. Sadasue, T. Fujii, Y. Miyauchi, and K. Minami. 2009. “Experimental study on seismic retrofitting steel brace of existing RC school buildings with low-strength concrete.” [In Japanese.] J. Struct. Constr. Eng. 74 (644): 1813–1820. https://doi.org/10.3130/aijs.74.1813.
JBDPA (Japan Building Disaster Prevention Association). 2017. Seismic evaluation standards and retrofit design guidelines for existing reinforced concrete structures. [In Japanese.] Tokyo: JBDPA.
Katsumata, H., M. Seki, F. Kumazawa, and T. Okada. 1989. “Retrofit method of existing reinforced concrete structures by ductile steel braces.” [In Japanese.] Proc. Jpn. Concr. Inst. 11 (2): 263–268.
Kei, T., and Y. Miyauchi. 2001. “Study on retrofitting adhered steel brace.” [In Japanese.] J. Struct. Constr. Eng. 66 (539): 103–109. https://doi.org/10.3130/aijs.66.103_1.
Kikuta, S., A. Miwa, S. Nakahara, and K. Mukai. 2008. “A study on seismic strengthening method with steel tube as cotter.” [In Japanese.] Proc. Jpn. Concr. Inst. 30 (3): 1183–1188.
Lee, H.-J., H.-B. Lee, H.-G. Park, and J.-K. Lee. 2021. “Cyclic loading test for two-story RC moment frames retrofitted with internal steel frames.” J. Struct. Eng. 147 (2): 04020333. https://doi.org/10.1061/(ASCE)ST.1943-541X.0002918.
Masuo, K., and T. Komiya. 2000. “Strengthening effects of infilled steel braces using both adhesion joints and combination joints.” [In Japanese.] Proc. Jpn. Concr. Inst. 22 (3): 1651–1656.
Miyagawa, K., R. Kinoshita, Y. Ohtani, and I. Mitani. 2003. “Stress transfer and design of indirect connections for external steel brace-retrofitting method.” [In Japanese.] Proc. Jpn. Concr. Inst. 25 (2): 1495–1500.
Nakamura, T., K. Kanata, T. Fujimura, and Y. Suzuki. 2005. “Seismic retrofit systems for R/C buildings without dowel anchors.” [In Japanese.] Concr. J. 43 (8): 25–33. https://doi.org/10.3151/coj1975.43.8_25.
Oh, S.-H., H.-S. Ryu, and T.-S. Moon. 2005. “Study for fabricable and adhesive seismic retrofit method using the steel members.” [In Korean.] J. Archit. Inst. Korea 21 (11): 51–58.
Ohmura, T., S. Hayashi, K. Kanata, T. Nakamura, Y. Nishikawa, Y. Suzuki, and T. Fujimura. 2007. “Shear transfer mechanism of seismic strengthened frames by steel braces without dowel anchors.” [In Japanese.] J. Struct. Constr. Eng. 72 (616): 73–80. https://doi.org/10.3130/aijs.72.73_3.
Ozcelik, R., U. Akpınar, and B. Binici. 2011. “Seismic retrofit of deficient RC structures with internal steel frames.” Adv. Struct. Eng. 14 (6): 1205–1222. https://doi.org/10.1260/1369-4332.14.6.1205.
Shih, C. T., S. Y. Chu, Y. W. Liou, F. P. Hsiao, C. C. Huang, T. C. Chiou, and Y. C. Chiou. 2015. “In situ test of school buildings retrofitted with external steel-framing systems.” J. Struct. Eng. 141 (1): D4014002. https://doi.org/10.1061/(ASCE)ST.1943-541X.0001063.
Ueki, R., K. Imai, H. Tomatsuri, and H. Kuramoto. 2010. “Influence of indirect joint on retrofitting effect by external steel frames.” [In Japanese.] J. Struct. Constr. Eng. 75 (654): 1501–1508. https://doi.org/10.3130/aijs.75.1501.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Jun 30, 2022
Accepted: Dec 22, 2022
Published online: Feb 23, 2023
Published in print: May 1, 2023
Discussion open until: Jul 23, 2023
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.