Quasi-Static Cyclic Behavior of CFRP-Confined Geopolymeric Composites
Publication: Journal of Composites for Construction
Volume 27, Issue 6
Abstract
The utilization of geopolymeric composites can considerably promote sustainability in the construction sector due to their low carbon footprint. In this work, an experimental study was performed to investigate the quasi-static cyclic behavior of geopolymeric composites confined by carbon fiber-reinforced polymer (CFRP). In total, 40 CFRP-confined geopolymeric composite columns were fabricated and tested. The primary variables included the matrix composition (i.e., slag contents of 0% and 10%), type of confined material (i.e., mortar and concrete with recycled aggregate replacement ratios of 0%, 50%, and 100%), and the load pattern (i.e., cyclic loading with a single cycle and cyclic loading with repeated cycles). Careful examination and analysis of the experiment results led to a series of conclusions regarding failure patterns, stress–strain behaviors, and characteristics under ultimate conditions. In addition, discussions were provided concerning the effects of the primary variables on the key characteristics of the stress–strain curves, which included plastic strain, residual and reloading moduli, and stress deterioration for the envelope and internal cycles. In addition, the prediction results by the existing models for fiber-reinforced polymer (FRP)-confined conventional concrete were compared with the test results to assess their applicability for CFRP-confined geopolymeric composites.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
All data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
Acknowledgments
The authors greatly acknowledge the financial support received from the National Natural Science Foundation of China (Grant No.11790283), the Natural Science Foundation of Hunan Province (2022JJ40615), Changsha Municipal Natural Science Foundation (kq2202099), and the Australian Research Council.
Notation
The following symbols are used in this paper:
- D
- diameter of concrete core;
- Ec
- elastic modulus of unconfined concrete;
- Efrp
- secant elastic modulus of FRP material;
- El
- lateral confinement stiffness;
- Ere
- reloading modulus;
- Eun,0
- residual modulus;
- ultimate axial compressive stress of FRP-confined concrete;
- peak axial compressive stress of unconfined concrete;
- ffrp
- ultimate tensile strength of FRP material;
- actual lateral confining pressure at ultimate condition;
- f30
- concrete strength of 30 MPa;
- n
- cycle number;
- ne
- effective cycle counter;
- tfrp
- thickness of FRP sheets;
- axial strain of unconfined concrete at ;
- ultimate axial strain of FRP-confined concrete;
- ultimate tensile strain of FRP material;
- hoop rupture strain of CFRP sheets;
- plastic strain;
- reloading strain;
- reference strain;
- unloading strain;
- envelope unloading strain;
- ϕn
- stress deterioration ratio for the nth unloading and reloading cycle;
- ρ
- confinement stiffness ratio;
- σnew
- stress on the reloading path at a reference strain ;
- σre
- reloading stress;
- σref
- stress on the previous reloading path at the reference strain ;
- σun,env
- envelope unloading stress; and
- ωn
- strain recovery ratio for the nth unloading and reloading cycles.
References
Abbasnia, R., R. Ahmadi, and H. Ziaadiny. 2012. “Effect of confinement level, aspect ratio and concrete strength on the cyclic stress–strain behavior of FRP-confined concrete prisms.” Composites, Part B 43 (2): 825–831. https://doi.org/10.1016/j.compositesb.2011.11.008.
Abbasnia, R., and H. Ziaadiny. 2010. “Behavior of concrete prisms confined with FRP composites under axial cyclic compression.” Eng. Struct. 32 (3): 648–655. https://doi.org/10.1016/j.engstruct.2009.11.011.
ASTM. 2014. Standard specification for coal fly ash and raw or calcinednatural pozzolan for use in concrete. ASTM C618-12. West Conshohocken, PA; ASTM.
Bajpai, R., K. Choudhary, A. Srivastava, K. S. Sangwan, and M. Singh. 2020. “Environmental impact assessment of fly ash and silica fume based geopolymer concrete.” J. Cleaner Prod. 254: 120147. https://doi.org/10.1016/j.jclepro.2020.120147.
Bakis, C. E., L. C. Bank, V. L. Brown, E. Cosenza, J. F. Davalos, J. J. Lesko, A. Machida, S. H. Rizkalla, and T. C. Triantafillou. 2002. “Fiber-Reinforced polymer composites for construction—State-of-the-Art review.” J. Compos. Constr. 6 (2): 73–87. https://doi.org/10.1061/(ASCE)1090-0268(2002)6:2(73).
Benhelal, E., G. Zahedi, E. Shamsaei, and A. Bahadori. 2013. “Global strategies and potentials to curb CO2 emissions in cement industry.” J. Cleaner Prod. 51: 142–161. https://doi.org/10.1016/j.jclepro.2012.10.049.
Cai, J., H. Hao, T. Ozbakkaloglu, Y. Zhang, and J. Pan. 2020. “Behavior of geopolymeric recycled aggregate concrete-filled FRP tube (GRACFFT) columns under lateral cyclic loading.” Eng. Struct. 222: 111047. https://doi.org/10.1016/j.engstruct.2020.111047.
Ding, Y., C.-J. Shi, and N. Li. 2018. “Fracture properties of slag/fly ash-based geopolymer concrete cured in ambient temperature.” Constr. Build. Mater. 190: 787–795. https://doi.org/10.1016/j.conbuildmat.2018.09.138.
Flower, D. J. M., and J. G. Sanjayan. 2007. “Green house gas emissions due to concrete manufacture.” Int. J. Life Cycle Assess. 12 (5): 282–288. https://doi.org/10.1065/lca2007.05.327.
Gartner, E. 2004. “Industrially interesting approaches to “low-CO2” cements.” Cem. Concr. Res. 34 (9): 1489–1498. https://doi.org/10.1016/j.cemconres.2004.01.021.
Habert, G., S. A. Miller, V. M. John, J. L. Provis, A. Favier, A. Horvath, and K. L. Scrivener. 2020. “Environmental impacts and decarbonization strategies in the cement and concrete industries.” Nat. Rev. Earth Environ. 1 (11): 559–573. https://doi.org/10.1038/s43017-020-0093-3.
Hany, N. F., E. G. Hantouche, and M. H. Harajli. 2015. “Axial stress-strain model of CFRP-confined concrete under monotonic and cyclic loading.” J. Compos. Constr. 19 (6): 04015004. https://doi.org/10.1061/(asce)cc.1943-5614.0000557.
Hollaway, L. C. 2010. “A review of the present and future utilisation of FRP composites in the civil infrastructure with reference to their important in-service properties.” Constr. Build. Mater. 24 (12): 2419–2445. https://doi.org/10.1016/j.conbuildmat.2010.04.062.
Hu, Y., Z. Tang, W. Li, Y. Li, and V. W. Y. Tam. 2019. “Physical-mechanical properties of fly ash/GGBFS geopolymer composites with recycled aggregates.” Constr. Build. Mater. 226: 139–151. https://doi.org/10.1016/j.conbuildmat.2019.07.211.
Khedmati, M., Y.-R. Kim, and J. A. Turner. 2019. “Investigation of the interphase between recycled aggregates and cementitious binding materials using integrated microstructural-nanomechanical-chemical characterization.” Composites, Part B 158: 218–229. https://doi.org/10.1016/j.compositesb.2018.09.041.
Lam, L., and J. G. Teng. 2009. “Stress–strain model for FRP-confined concrete under cyclic axial compression.” Eng. Struct. 31 (2): 308–321. https://doi.org/10.1016/j.engstruct.2008.08.014.
Lam, L., J. G. Teng, C. H. Cheung, and Y. Xiao. 2006. “FRP-confined concrete under axial cyclic compression.” Cem. Concr. Compos. 28 (10): 949–958. https://doi.org/10.1016/j.cemconcomp.2006.07.007.
Li, J., J. Xie, F. Liu, and Z. Lu. 2019a. “A critical review and assessment for FRP-concrete bond systems with epoxy resin exposed to chloride environments.” Compos. Struct. 229: 111372. https://doi.org/10.1016/j.compstruct.2019.111372.
Li, P., L. Sui, F. Xing, and Y. Zhou. 2019b. “Static and cyclic response of low-strength recycled aggregate concrete strengthened using fiber-reinforced polymer.” Composites, Part B 160: 37–49. https://doi.org/10.1016/j.compositesb.2018.10.002.
Li, P., and Y.-F. Wu. 2015. “Stress–strain model of FRP confined concrete under cyclic loading.” Compos. Struct. 134: 60–71. https://doi.org/10.1016/j.compstruct.2015.08.056.
Li, P., and Y.-F. Wu. 2016. “Stress–strain behavior of actively and passively confined concrete under cyclic axial load.” Compos. Struct. 149: 369–384. https://doi.org/10.1016/j.compstruct.2016.04.033.
Li, P., Y.-F. Wu, and R. Gravina. 2016. “Cyclic response of FRP-confined concrete with post-peak strain softening behavior.” Constr. Build. Mater. 123: 814–828. https://doi.org/10.1016/j.conbuildmat.2016.07.065.
Li, P., Y.-F. Wu, Y. Zhou, and F. Xing. 2018. “Cyclic stress-strain model for FRP-confined concrete considering post-peak softening.” Compos. Struct. 201: 902–915. https://doi.org/10.1016/j.compstruct.2018.06.088.
Li, W., Z. Tang, V. W. Y. Tam, X. Y. Zhao, and K. Wang. 2019c. “A review on durability of alkali-activated system from sustainable construction materials to infrastructures.” ES Mater. Manuf. 4: 2–19. https://doi.org/10.30919/esmm5f204.
Lim, J. C., and T. Ozbakkaloglu. 2014. “Stress–strain model for normal- and light-weight concretes under uniaxial and triaxial compression.” Constr. Build. Mater. 71: 492–509. https://doi.org/10.1016/j.conbuildmat.2014.08.050.
Lokuge, W., and W. Karunasena. 2016. “Ductility enhancement of geopolymer concrete columns using fibre-reinforced polymer confinement.” J. Compos. Mater. 50 (14): 1887–1896. https://doi.org/10.1177/0021998315597553.
McLellan, B. C., R. P. Williams, J. Lay, A. van Riessen, and G. D. Corder. 2011. “Costs and carbon emissions for geopolymer pastes in comparison to ordinary Portland cement.” J. Cleaner Prod. 19 (9–10): 1080–1090. https://doi.org/10.1016/j.jclepro.2011.02.010.
Micelli, F., R. Mazzotta, M. Leone, and M. A. Aiello. 2015. “Review study on the durability of FRP-confined concrete.” J. Compos. Constr. 19 (3): 04014056. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000520.
Mugahed Amran, Y. H., R. Alyousef, R. S. M. Rashid, H. Alabduljabbar, and C.-C. Hung. 2018. “Properties and applications of FRP in strengthening RC structures: A review.” Structures 16: 208–238. https://doi.org/10.1016/j.istruc.2018.09.008.
Ozbakkaloglu, T., and E. Akin. 2012. “Behavior of FRP-confined normal- and high-strength concrete under cyclic axial compression.” J. Compos. Constr. 16 (4): 451–463. https://doi.org/10.1061/(asce)cc.1943-5614.0000273.
Ozbakkaloglu, T., and J. C. Lim. 2013. “Axial compressive behavior of FRP-confined concrete: Experimental test database and a new design-oriented model.” Composites, Part B 55: 607–634. https://doi.org/10.1016/j.compositesb.2013.07.025.
Ozbakkaloglu, T., and T. Xie. 2016. “Geopolymer concrete-filled FRP tubes: Behavior of circular and square columns under axial compression.” Composites, Part B 96: 215–230. https://doi.org/10.1016/j.compositesb.2016.04.013.
Petek Gursel, A., E. Masanet, A. Horvath, and A. Stadel. 2014. “Life-cycle inventory analysis of concrete production: A critical review.” Cem. Concr. Compos. 51: 38–48. https://doi.org/10.1016/j.cemconcomp.2014.03.005.
Provis, J. L. 2014. “Geopolymers and other alkali activated materials: Why, how, and what?” Mater. Struct. 47 (1-2): 11–25. https://doi.org/10.1617/s11527-013-0211-5.
Provis, J. L., A. Palomo, and C. Shi. 2015. “Advances in understanding alkali-activated materials.” Cem. Concr. Res. 78: 110–125. https://doi.org/10.1016/j.cemconres.2015.04.013.
Sakai, J., and K. Kawashima. 2006. “Unloading and reloading stress–strain model for confined concrete.” J. Struct. Eng. 132 (1): 112–122. https://doi.org/10.1061/(ASCE)0733-9445(2006)132:1(112).
Sandanayake, M., C. Gunasekara, D. Law, G. Zhang, and S. Setunge. 2018. “Greenhouse gas emissions of different fly ash based geopolymer concretes in building construction.” J. Cleaner Prod. 204: 399–408. https://doi.org/10.1016/j.jclepro.2018.08.311.
Scrivener, K. 2012. “Issues in sustainability in cements and concrete.” Am. Ceram. Soc. Bull. 91: 47–50.
Shao, Y., Z. Zhu, and A. Mirmiran. 2006. “Cyclic modeling of FRP-confined concrete with improved ductility.” Cem. Concr. Compos. 28 (10): 959–968. https://doi.org/10.1016/j.cemconcomp.2006.07.009.
Shi, X. S., F. G. Collins, X. L. Zhao, and Q. Y. Wang. 2012. “Mechanical properties and microstructure analysis of fly ash geopolymeric recycled concrete.” J. Hazard. Mater. 237-238: 20–29. https://doi.org/10.1016/j.jhazmat.2012.07.070.
Silva, R. V., J. de Brito, and R. K. Dhir. 2014. “Properties and composition of recycled aggregates from construction and demolition waste suitable for concrete production.” Constr. Build. Mater. 65: 201–217. https://doi.org/10.1016/j.conbuildmat.2014.04.117.
Singh, B., G. Ishwarya, M. Gupta, and S. K. Bhattacharyya. 2015. “Geopolymer concrete: A review of some recent developments.” Constr. Build. Mater. 85: 78–90. https://doi.org/10.1016/j.conbuildmat.2015.03.036.
Singh, N. B., and B. Middendorf. 2020. “Geopolymers as an alternative to Portland cement: An overview.” Constr. Build. Mater. 237: 117455. https://doi.org/10.1016/j.conbuildmat.2019.117455.
Tang, Z., Y. Hu, V. W. Y. Tam, and W. Li. 2019a. “Uniaxial compressive behaviors of fly ash/slag-based geopolymeric concrete with recycled aggregates.” Cem. Concr. Compos. 104: 103375. https://doi.org/10.1016/j.cemconcomp.2019.103375.
Tang, Z., Y. Hu, V. W. Y. Tam, and W. Li. 2019b. “Uniaxial compressive behaviors of fly ash/slag-based geopolymeric concrete with recycled aggregates.” Cem. Concr. Compos. 104: 103375. https://doi.org/10.1016/j.cemconcomp.2019.103375.
Tang, Z., W. Li, V. W. Y. Tam, and Z. Luo. 2020a. “Investigation on dynamic mechanical properties of fly ash/slag-based geopolymeric recycled aggregate concrete.” Composites, Part B 185: 107776. https://doi.org/10.1016/j.compositesb.2020.107776.
Tang, Z., W. Li, V. W. Y. Tam, and C. Xue. 2020b. “Advanced progress in recycling municipal and construction solid wastes for manufacturing sustainable construction materials.” Resour. Conserv. Recycl.: X 6: 100036. https://doi.org/10.1016/j.rcrx.2020.100036.
Tang, Z., W. Li, V. W. Y. Tam, and L. Yan. 2020c. “Mechanical behaviors of CFRP-confined sustainable geopolymeric recycled aggregate concrete under both static and cyclic compressions.” Compos. Struct. 252: 112750. https://doi.org/10.1016/j.compstruct.2020.112750.
Tang, Z., W. Li, V. W. Y. Tam, and L. Yan. 2020d. “Mechanical performance of CFRP-confined sustainable geopolymeric recycled concrete under axial compression.” Eng. Struct. 224: 111246. https://doi.org/10.1016/j.engstruct.2020.111246.
Turner, L. K., and F. G. Collins. 2013. “Carbon dioxide equivalent (CO2-e) emissions: A comparison between geopolymer and OPC cement concrete.” Constr. Build. Mater. 43: 125–130. https://doi.org/10.1016/j.conbuildmat.2013.01.023.
Wang, J., J. Xie, C. Wang, J. Zhao, F. Liu, and C. Fang. 2020. “Study on the optimum initial curing condition for fly ash and GGBS based geopolymer recycled aggregate concrete.” Constr. Build. Mater. 247: 118540. https://doi.org/10.1016/j.conbuildmat.2020.118540.
Wang, Z., D. Wang, S. T. Smith, and D. Lu. 2012. “Experimental testing and analytical modeling of CFRP-confined large circular RC columns subjected to cyclic axial compression.” Eng. Struct. 40: 64–74. https://doi.org/10.1016/j.engstruct.2012.01.004.
Xie, J., J. Wang, B. Zhang, C. Fang, and L. Li. 2019. “Physicochemical properties of alkali activated GGBS and fly ash geopolymeric recycled concrete.” Constr. Build. Mater. 204: 384–398. https://doi.org/10.1016/j.conbuildmat.2019.01.191.
Yu, T., and J. G. Teng. 2011. “Design of concrete-filled FRP tubular columns: Provisions in the Chinese technical code for infrastructure application of FRP composites.” J. Compos. Constr. 15 (3): 451–461. https://doi.org/10.1061/(asce)cc.1943-5614.0000159.
Yu, T., B. Zhang, and J. G. Teng. 2015. “Unified cyclic stress–strain model for normal and high strength concrete confined with FRP.” Eng. Struct. 102: 189–201. https://doi.org/10.1016/j.engstruct.2015.08.014.
Ziaadiny, H. 2016. “Plastic strain and stress deterioration of FRP-confined concrete prisms under axial cyclic compression.” Mater. Struct. 49 (4): 1157–1164. https://doi.org/10.1617/s11527-015-0565-y.
Information & Authors
Information
Published In
Copyright
© 2023 American Society of Civil Engineers.
History
Received: Sep 6, 2022
Accepted: Jul 11, 2023
Published online: Aug 28, 2023
Published in print: Dec 1, 2023
Discussion open until: Jan 28, 2024
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.