Liquefaction Potential of Christchurch Silty Soil
Publication: Geo-Congress 2024
ABSTRACT
Southwest Christchurch, New Zealand, with thick successions of thinly interbedded fine sand and silt swamp deposits, had no-to-marginal liquefaction ejecta in the 2010–2011 Canterbury earthquakes even though state-of-practice liquefaction assessment procedures indicated severe ground failure would occur. To understand reasons for this discrepancy, the first cyclic simple shear tests were performed on high-quality “undisturbed” specimens of Christchurch silty soil. An alternative Japanese Standard JIS A 1224:2009 Test Method was developed to evaluate the minimum and maximum void ratios of the cyclic test specimens and establish their relative densities. The cyclic test specimens of the same soil unit were then mixed and reconstituted for steady-state testing in a triaxial device. This paper presents the stress-strain relationships, cyclic resistance ratio curves, and steady-state lines for three silty soils. The silty soils exhibited cyclic mobility with limited strain potential in the cyclic simple shear tests. The same dilative tendencies of the soil at its current state and effective stress were confirmed by the steady-state test results.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
ASTM. ASTM D4318-10. Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.
Beyzaei, C. Z., Bray, J. D., van Ballegooy, S., Cubrinovski, M., and Bastin, S. (2018a). “Depositional environment effects on observed liquefaction performance in silt swamps during the Canterbury earthquake sequence.” Soil Dynamics and Earthquake Eng., 107, 303–321. doi: https://doi.org/10.1016/j.soildyn.2018.01.035.
Beyzaei, C. Z., Bray, J. D., Cubrinovski, M., Riemer, M., and Stringer, M. (2018b). Laboratory- based characterization of shallow silty soils in southwest Christchurch. Soil Dynamics and Earthquake Engineering, 110, 93–109. https://doi.org/10.1016/j.soildyn.2018.01.046.
Boulanger, R. W., and Idriss, I. M. (2016). “CPT-Based Liquefaction Triggering Procedure.” J. of Geotechnical and Geoenvironmental Engineering, 142(2), 04015065—1-11. https://doi.org/10.1061/(asce)gt.1943-5606.0001388.
Bray, J. D., Beyzaei, C. Z., Cubrinovski, M., Riemer, M. F., Markham, C., Stringer, M. E., Jacka, M., Wentz, F. J., and Haycock, I. (2016). Recommendations for High-Quality Field Sampling Procedures Using the Dames & Moore (DM) Hydraulic Fixed-Piston Thin-Walled Tube Sampler.
Cubrinovski, M., and Ishihara, K. (2000). “Flow potential of sandy soils with different grain compositions.” Soils and Foundations, 40(4), 103–119.
Cubrinovski, M., and Ishihara, K. (2002). “Maximum and Minimum Void Ratio Characteristics of Sands.” Soils and Foundations, 42(6), 65–78. doi: https://doi.org/10.3208/sandf.42.6_65.
Cubrinovski, M., Rhodes, A., Ntritsos, N., and van Ballegooy, S. (2019). “System response of liquefiable deposits.” J. of Soil Dynamics and Earthquake Eng., 124, 212–229. doi: https://doi.org/10.1016/j.soildyn.2018.05.013.
Duncan, and Seed. (1967). “Corrections for Strength Test Data.” J. of the Soil Mechanics and Foundations Division, ASCE, 93(SM5), 121–137.
Hutabarat, D., and Bray, J. D. (2021a). “Effective Stress Analysis of Liquefiable Sites to Estimate the Severity of Sediment Ejecta.” J. of Geotechnical and Geoenvironmental Engineering, ASCE, 147(5), https://doi.org/10.1061/(ASCE)GT.1943-5606.0002503.
Hutabarat, D., and Bray, J. D. (2021b). “Seismic Response Characteristics of Liquefiable Sites with and without Sediment Ejecta Manifestation.” J. of Geotechnical and Geoenvironmental Engineering, ASCE, 147(6), https://doi.org/10.1061/(ASCE)GT.1943-5606.0002506.
Hvorslev, M. J. (1949). Subsurface exploration and sampling of soils for civil engineering purposes. Waterways Experiment Station, Vicksburg, MS.
Ishihara, K. (1996). Soil Behaviour in Earthquake Geotechnics. Great Britain: Oxford Univ. Press.
Lade, P. V., Liggio, C. D., and Yamamuro, J. A. (1998). “Effects of non-plastic fines on minimum and maximum void ratios of sand.” Geotechnical Testing J., GTJODJ, 21(4), 336–347.
Markham, C. S., Bray, J. D., Cubrinovski, M., and Riemer, M. F. (2018). “Liquefaction resistance and steady state characterization of shallow soils within the Christchurch Central Business District.” J. Geotech. Geoenviron. Eng., ASCE, 144(6), doi.org/10.1061/(ASCE)GT.1943-5606.0001823.
Mijic, Z., Bray, J. D., Riemer, M. F., Rees, S. D., and Cubrinovski, M. (2021a). “Cyclic and monotonic simple shear testing of native Christchurch silty soil.” Soil Dynamics and Earthquake Eng., 148, 106834. https://doi.org/10.1016/j.soildyn.2021.106834.
Mijic, Z., Bray, J. D., Riemer, M. F., Cubrinovski, M., and Rees, S. D. (2021b). “Test Method for Minimum and Maximum Densities of Small Quantities of Soil.” Soils and Foundations, 61(2), 533–540. https://doi.org/10.1016/j.sandf.2020.12.003.
Seed, H. B. (1979). Soil Liquefaction and Cyclic Mobility Evaluation for Level Ground during Earthquakes. Journal of the Geotechnical Engineering Division, 105(GT2), 201–255. doi: https://doi.org/10.1016/0148-9062(79)91243-9.
Tatsuoka, F., Ochi, K., Fujii, S., and Okamoto, M. (1986). “Cyclic undrained triaxial and torsional shear strength of sands for different sample preparation methods.” Soils and Foundations, 26(3), 23–41.
Taylor, M. L. (2015). The geotechnical characterisation of Christchurch sands for advanced soil modelling. Doctoral dissertation, Univ. of Canterbury, New Zealand.
Thevanayagam, S., Shenthan, T., Mohan, S., and Liang, J. (2002). “Undrained fragility of clean sands, silty sands and sandy silts.” ASCE J. of Geotech. and Geoenviron. Engrg., 128(10), 849–859.
Vaid, Y. P., and Sivathayalan, S. (1996). “Static and cyclic liquefaction potential of Fraser Delta sand.” Canadian Geotechnical Journal, 33, 281–289.
Wu, J. (2002). Liquefaction Triggering and Post-Liquefaction Deformation of Monterey 0/30 Sand Under Uni-Directional Cyclic Simple Shear Loading. Doctoral dissertation, Univ. of California, Berkeley.
Information & Authors
Information
Published In
Geo-Congress 2024
Pages: 94 - 104
History
Published online: Feb 22, 2024
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.