Effect of Portland Limestone Cement (Type IL) Combined with Bagasse Ash on the Compressive Strength and Setting Time of Engineered Cementitious Composites
Publication: Tran-SET 2022
ABSTRACT
This study investigates the influence of using Portland limestone cement (PLC), also referred to as Type IL cement, as a complete substitution for ordinary Portland Cement Type I in engineered cementitious composites (ECC). ECC mixtures with two different replacement levels of ordinary Portland cement with PLC were produced (i.e., 0% and 100% by mass). In addition, both ECC mixtures were produced using fly ash as supplementary cementitious materials, sugarcane bagasse ash as fine sand, and polyvinyl alcohol fiber at a 1.5% volume fraction. The compressive strength of the produced ECC mixtures was evaluated at 28 days of curing. The setting time of each ECC mixture was evaluated by following the guidelines of ASTM C403. Experimental results demonstrated that the mixture using PLC as a binder improved the compressive strength by 7.16% compared to the mixture utilizing Portland cement. The setting time results indicated that PLC used as a binder decreased the initial setting time by 18.73% and decreased the final setting time by 11.59% compared to using Portland cement.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
AASHTO M240. Standard Specification for Blended Hydraulic Cement. (2012). https://10.1520/C0595-08A.
Ajith, G., Shanmugasundaram, N., and Praveenkumar, S. (2021). Effect of mineral admixtures and manufactured sand on compressive strength of engineered cementitious composite. Journal of Building Pathology and Rehabilitation, 6(1), 1–9.
Al Bakri, M., Mohammed, H., Kamarudin, H., Khairul Niza, I., and Zarina, Y. (2011). Review on fly ash-based geopolymer concrete without Portland Cement. Journal of Engineering and Technology Research, 3(1), 1–4.
Al Mulla, I. F., Al Rihimy, A. S., and Abd Alameer, M. S. (2020). Properties of engineered cementitious composite concrete (bendable concrete) produced using Portland Limestone Cement. IOP Conference Series: Materials Science and Engineering, 671(1). https://doi.org/10.1088/1757-899x/671/1/012131.
ASTM Standard C39. Standard Test Method for Compressive Strength of Cylindrical Concrete Specimens. ASTM International, West Conshohocken, PA, (2003).
ASTM Standard C595/C595M. Standard Specification for Blended Hydraulic Cements. ASTM International, West Conshohocken, PA, (2010).
ASTM Standard C403-08 Standard test method for time of setting of concrete mixtures by penetration resistance. ASTM International, West Conshohocken, PA, (2008).
ASTM Standard C618, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete. West Conshohocken, PA. (2017). https://doi.org/10.1520/C0618.
Barcelo, L., Kline, J., Walenta, G., and Gartner, E. (2013). Cement and carbon emissions. Materials and Structures, 47(6), 1055–1065. https://doi.org/10.1617/s11527-013-0114-5.
Berke, N. S., Inceefe, A. N., Kramer, A., and Antommattei, O. R. (2022). Durability of Portland Limestone Cement Concrete. In Concrete International (1st ed., Vol. 44, pp. 34–39). essay, Concrete International.
Bhattacharya, S., and Saha, J. (2015). High level automation to achieve improved productivity, energy efficiency and consistent cement quality. 2015 IEEE-IAS/PCA Cement Industry Conference (IAS/PCA CIC), 1–7. https://doi.org/10.1109/CITCON.2015.7122610.
Coppola, L., Bellezze, T., Belli, A., Bignozzi, M. C., Bolzoni, F., Brenna, A. and Yang, F. (2018). Binders’ alternative to Portland cement and waste management for sustainable construction–Part 2. Journal of applied biomaterials & functional materials, 16(4), 207–221.
Cost, V. T., Howard, I. L., and Shannon, J. (2013). Improving concrete sustainability and performance with use of Portland–limestone cement synergies. Transportation research record, 2342(1), 26–34.
Courland, R. (2011). Concrete Planet: The Strange and Fascinating Story of the World’s Most Common Man-Made Material. Prometheus Books.
Dhir, R. K., Limbachiya, M. C., McCarthy, M. J., and Chaipanich, A. (2007). Evaluation of Portland limestone cements for use in concrete construction. Materials and structures, 40(5), 459–473.
Githachuri, K., and Alexander, M. (2013). Durability performance potential and strength of blended Portland Limestone Cement Concrete. Cement and Concrete Composites, 39, 115–121. https://doi.org/10.1016/j.cemconcomp.2013.03.027.
Howard, I. L., Shannon, J., Cost, V. T., and Stovall, M. (2015). Davis wade stadium expansion and renovation: Performance of concrete produced with Portland-limestone cement, fly ash, and slag cement. Journal of Materials in Civil Engineering, 27(12), 04015044.
Huang, X., Ranade, R., and Li, V. C. (2013). Feasibility study of developing green ECC using iron ore tailings powder as cement replacement. Journal of Materials in Civil Engineering, 25(7), 923–931.
IEA (International Energy Agency). (2021). Cement-Analysis. https://www.iea.org/reports/cement.
Li, V. C. (1992). Postcrack scaling relations for fiber reinforced cementitious composites. Journal of materials in civil engineering, 4(1), 41–57.
Li, V. C. (1993). From Micromechanics to Structural Engineering, The Design of Cementitious Composites for Civil Engineering Applications. JSCE Journal of Structural Mechanics and Earthquake Engineering, Vol. 10, No. 2, pp. 37–48.
Li, V. C. (1998). “Engineered Cementitious Composites (ECC) – Tailored Composites Through Micromechanical Modeling” in Fiber Reinforced Concrete: Present and the Future edited by N. Banthia, A. Bentur, A. and A. Mufti, Canadian Society for Civil Engineering, Montreal, pp. 64–97, 1998.
Li, V. C. (2008). Engineered Cementitious Composites (ECC) – Material, Structural, and Durability Performance. In Concrete Construction Engineering Handbook, 2nd ed. (Nawy, E. ed.), CRC Press, Boca Raton, Florida.
Li, V. C. (2019). Engineered cementitious composites (Ecc) bendable concrete for sustainable and Resilient Infrastructure. Springer Berlin Heidelberg.
Mark, O., Ede, A. N., Olofinnade, O., Bamigboye, G., Okeke, C., Oyebisi, S. O., and Arum, C. (2019). Influence of Some Selected Supplementary Cementitious Materials on Workability and Compressive Strength of Concrete – A Review. 1st International Conference on Sustainable Infrastructural Development. https://doi.org/10.1088/1757-899X/640/1/012071.
Muktadir, M. G., Alam, M. F., Rahman, A., and Haque, M. R. (2020). Comparison of Compressive Strength and Flexural Capacity between Engineered Cementitious Composites (Bendable Concrete) and Conventional Concrete used in Bangladesh. Journal of Materials and Engineering Structures JMES, 7(1), 73–82.
Osei, D. Y., and Jackson, E. N. (2012). Compressive strength and workability of concrete using natural pozzolana as partial replacement of ordinary Portland cement. Advances in Applied Science Research, 3(6), 3658–3662.
Raghav, M., Park, T., Yang, H. M., Lee, S. Y., Karthick, S., and Lee, H. S. (2021). Review of the Effects of Supplementary Cementitious Materials and Chemical Additives on the Physical, Mechanical and Durability Properties of Hydraulic Concrete. Materials (Basel, Switzerland), 14(23), 7270. https://doi.org/10.3390/ma14237270.
Rauf, N., Damayanti, M. C., and Pratama, S. W. (2017). The influence of sugarcane bagasse ash as fly ash on cement quality. AIP Conference Proceedings, 1801(040009). https://doi.org/10.1063/1.4973098.
Ramezanianpour, A. M., and Hooton, R. D. (2014). A study on hydration, compressive strength, and porosity of Portland-limestone cement mixes containing SCMs. Cement and Concrete Composites, 51, 1–13.
Salah, S., Fawzi, N. M., and Ahmed, I. F. (2021). Time dependent behavior of engineered cementitious composite concrete produced from Portland Limestone Cement. IOP Conference Series: Earth and Environmental Science, 856, 1–9. https://doi.org/10.1088/1755-1315/856/1/012016.
Shehata, N., Sayed, E. T., and Abdelkareem, M. A. (2021). Recent progress in environmentally friendly geopolymers: A Review. Science of The Total Environment, 762. https://doi.org/10.1016/j.scitotenv.2020.143166.
Singh, N. B., and Middendorf, B. (2020). Geopolymers as an alternative to Portland Cement: An overview. Construction and Building Materials, 237. https://doi.org/10.1016/j.conbuildmat.2019.117455.
Subedi, S., Arce, G. A., Noorvand, H., Hassan, M. M., Barbato, M., and Mohammad, L. N. (2021). Properties of engineered cementitious composites with raw sugarcane bagasse ash used as sand replacement. Journal of Materials in Civil Engineering, 33(9), 04021231.
Subedi, S., Arce, G. A., Hassan, M. M., Barbato, M., and Mohammad, L. N. (2021). Effect of raw sugarcane bagasse ash as sand replacement on the fiber-bridging properties of engineered Cementitious Composites. Transportation Research Record: Journal of the Transportation Research Board, 2675(11), 1028–1042.
Subedi, S., Arce, G. A., Hassan, M. M., Barbato, M., Mohammad, L. N., and Rupnow, T. (2022). Feasibility of ECC with high contents of post-processed bagasse ash as partial cement replacement. Construction and Building Materials, 319, 126023.
Thomas, M. D. A., Cail, K., Blair, B., Delagrave, A., and Barcelo, L. (2010). Equivalent Performance with Half the Clinker Content using PLC and SCM. 2010 Concrete Sustainability Conference.
Thomas, M. D. A., Cail, K., Blair, B., Delagrave, A., Masson, P., and Kazanis, K. (2010). Use of Low-CO2 Portland Limestone Cement for Pavement Construction in Canada. International Journal of Pavement Research and Technology, 3(5), 228–233.
Thomas, M. D. A., Hooton, D., Cail, K., Smith, B., De Wal, J., and Kazanis, K. (2010). Field Trials of Concretes Produced with Portland Limestone Cement. Concrete International January 2010, 35–41.
Thongsanitgarn, P., Wongkeo, W., Sinthupinyo, S., and Chaipanich, A. (2012). Effect of limestone powders on compressive strength and setting time of Portland-limestone cement pastes. In Advanced Materials Research, 343, 322–326.
Yang, E. H., Yang, Y., and Li, V. C. (2007). Use of high volumes of fly ash to improve ECC mechanical properties and material greenness. ACI materials journal, 104(6), 620.
Zhou, J., Qian, S., Sierra Beltran, M. G., Ye, G., van Breugel, K., and Li, V. C. (2010). Development of engineered cementitious composites with limestone powder and blast furnace slag. Materials and structures, 43(6), 803–814.
Information & Authors
Information
Published In
History
Published online: Dec 13, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.