Assessing Lower Extremity Kinematics of Roofing Tasks
Publication: Construction Research Congress 2022
ABSTRACT
Roofers spend considerable time in awkward postures due to steep-slope rooftops. The combination of these postures, the forces acting on them, and the time spent in such postures increases the chance of roofers developing musculoskeletal disorders (MSDs). Several studies have connected these awkward postures to potential risk factors for injuries and disorders; however, existing models are not appropriate in roof workplaces because they are designed to assess work-related risk factors for general tasks. This study examines the impacts of work-related factors, namely working posture and roof slope, on kinematics measurements of body segments in a laboratory setting. To achieve this objective, time-stamped motion data from inertial measurement unit (IMU) devices (i.e., accelerometer, gyroscope, and quaternion signals) were collected from a sample of six undergraduate students at George Mason University. Participants performed two common roofing activities, namely walking along the roof and squatting in different roof slopes (0°, 30°). Comparing IMU signals using statistical analysis demonstrated significant differences in body kinematics between roofing activities on the slope and level ground. Overall, sloped-surface activities on a 30° roof resulted in changes in about 26% of walking and 12% of squatting variables. Such information is useful for a logical understanding of roofing MSD development and may lead to better interventions and guidelines for reducing roofing injuries.
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Alwasel, A., Abdel-Rahman, E. M., Haas, C. T., and Lee, S. (2017). “Experience, productivity, and musculoskeletal injury among masonry workers.” Journal of Construction Engineering and Management, 143(6), 05017003.
Bernard, B. P. (1997). Musculoskeletal disorders and workplace factors: A critical review of epidemiologic evidence for work-related musculoskeletal disorders of the neck, upper extremity, and low back, US DHHS. National Institute for Occupational Safety and Health, Cincinnati.
BLS. 2017. Nonfatal occupational injuries and illnesses: cases with days away from work.https://www.bls.gov/news.release/pdf/osh2.pdf. (accessed August 2021).
Breloff, S. P., Wade, C., and Waddell, D. E. (2019). “Lower extremity kinematics of cross-slope roof walking.” Applied Ergonomics, 75, 134–142.
CPWR (Center for Construction Research and Training). (2013). The construction chart book: The United States Construction Industry and its Workers, 5th Ed., Silver Spring, MD.
Dai, F., Yoon, Y., and GangaRao, H. V. (2016). “State of practice of construction site safety in the USA.” Frontiers of Engineering Management, 3(3), 275–282.
Dixon, P. C., and Pearsall, D. J. (2010). “Gait dynamics on a cross-slope walking surface.” Journal of Applied Biomechanics, 26(1), 17–25.
Fredericks, T. K., Abudayyeh, O., Choi, S. D., Wiersma, M., and Charles, M. (2005). “Occupational injuries and fatalities in the roofing contracting industry.” Journal of Construction Engineering and Management, 131(11), 1233–1240.
Hasanzadeh, S., de la Garza, J. M., and Geller, E. S. (2020). “How sensation-seeking propensity determines individuals’ risk-taking behaviors: Implication of risk compensation in a simulated roofing task.” Journal of Management in Engineering, 36(5), 04020047.
Hsiao, H. (2014). “Fall prevention research and practice: A total worker safety approach.” Industrial Health, 52(5), 381–392.
Hunting, K. L., Murawski, J. A., and Welch, L. S. (2004). Occupational injuries among construction workers treated at the George Washington University emergency department. Center to Protect Workers’ Rights (CPWR), Silver Spring, MD.
Jaffar, N., Abdul-Tharim, A. H., Mohd-Kamar, I. F., and Lop, N. S. (2011). “A literature review of ergonomics risk factors in construction industry.” Procedia Engineering, 20, 89–97.
Jebelli, H., Ahn, C. R., and Stentz, T. L. (2016). “Comprehensive fall-risk assessment of construction workers using inertial measurement units: Validation of the gait-stability metric to assess the fall risk of iron workers.” Journal of Computing in Civil Engineering, 30(3), 04015034.
Jebelli, H., Ahn, C. R., and Stentz, T. L. (2016). “Fall risk analysis of construction workers using inertial measurement units: Validating the usefulness of the postural stability metrics in construction.” Safety Science, 84, 161–170.
Leroux, A., Fung, J., and Barbeau, H. (2002). “Postural adaptation to walking on inclined surfaces: I. Normal strategies.” Gait & Posture, 15(1), 64–74.
McIntosh, A. S., Beatty, K. T., Dwan, L. N., and Vickers, D. R. (2006). “Gait dynamics on an inclined walkway.” Journal of Biomechanics, 39(13), 2491–2502.
Nath, N. D., Chaspari, T., and Behzadan, A. H. (2018). “Automated ergonomic risk monitoring using body-mounted sensors and machine learning.” Advanced Engineering Informatics, 38, 514–526.
Parijat, P., and Lockhart, T. E. (2008). “Effects of lower extremity muscle fatigue on the outcomes of slip-induced falls.” Ergonomics, 51(12), 1873–1884.
Valero, E., Sivanathan, A., Bosché, F., and Abdel-Wahab, M. (2016). “Musculoskeletal disorders in construction: A review and a novel system for activity tracking with body area network.” Applied Ergonomics, 54, 120–130.
Valero, E., Sivanathan, A., Bosché, F., and Abdel-Wahab, M. (2017). “Analysis of construction trade worker body motions using a wearable and wireless motion sensor network.” Automation in Construction, 83, 48–55.
Wade, C., Davis, J., and Weimar, W. H. (2014). “Balance and exposure to an elevated sloped surface.” Gait and Posture, 39(1), 599–605.
Wang, D., Dai, F., Ning, X., Dong, R. G., and Wu, J. Z. (2017). “Assessing work-related risk factors on low back disorders among roofing workers.” Journal of Construction Engineering and Management, 143(7), 04017026.
Welch, L., Haile, E., Boden, L. I., and Hunting, K. L. (2009). “Musculoskeletal disorders among construction roofers—physical function and disability.” Scandinavian Journal of Work, Environment & Health, 56–63.
Welch, L. S., Haile, E., Boden, L. I., and Hunting, K. L. (2010). “Impact of musculoskeletal and medical conditions on disability retirement—A longitudinal study among construction roofers.” American Journal of Industrial Medicine, 53(6), 552–560.
Xu, H., Jampala, S., Bloswick, D., Zhao, J., and Merryweather, A. (2017). “Evaluation of knee joint forces during kneeling work with different kneepads.” Applied Ergonomics, 58, 308–313.
Yan, X., Li, H., Li, A. R., and Zhang, H. (2017). “Wearable IMU-based real-time motion warning system for construction workers’ musculoskeletal disorders prevention.” Automation in Construction, 74, 2–11.
Yang, K., Ahn, C. R., Vuran, M. C., and Kim, H. (2016). “Sensing workers gait abnormality for safety hazard identification.” In ISARC. Proceedings of the International Symposium on Automation and Robotics in Construction (Vol. 33, p. 1). IAARC Publications.
Information & Authors
Information
Published In
Construction Research Congress 2022
Pages: 481 - 490
History
Published online: Mar 7, 2022
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.