References

AAWE. (2005). “American Association for Wind Engineering: Mission Statement and Objectives.”

Acioly, C., and Davidson, F. (1996). “Habitat II.- Density in Urban Development.” Lund Centre for Habitat Studies, Lund University, Building Issues, 3(8), 8–11.

Akbari, H., Rosenfield, A. H., and Taha, H. (1990). “Summer heat islands, urban trees and white surfaces.” ASHRAE Transactions, 96(1), 1381–1388.

ANSI/ASHRAE. (2004). ASHRAE Standard 55-2004, “Thermal environmental conditions for human occupancy.” American Society for Heating, Refrigerating and Air-conditioning Engineers, Atlanta GA.

ASCE. (1999). “Wind tunnel studies of buildings and structures.” ASCE Manuals and Reports on Engineering Practice, 67, Reston, VA.

ASCE Task Committee on Outdoor Human Comfort. (2003). “Outdoor human comfort and its assessment; state of the art.” ASCE, Reston, VA.

ASCE. (2005). “Minimum design loads for buildings and other structures.” ASCE/SEI 7-05, Reston, VA.

ASHRAE. (2005). “Handbook of Fundamentals.” ASHRAE, Atlanta, Chap. 8.

Awang, A., Salim, M., and Halldane, J. (1994). “Environmental and urban management in southeast Asia.” Urban Habitat and Highrise Monograph. Institute Sultan Iskandar, Johor.

Aynsley, R. (1973). “The environment around tall buildings.” Proceedings of the Twelfth Regional Conference on Tall Buildings, Sydney. Joint Committee on Tall Buildings, Lehigh University, Bethlehem PA, 256–274.

Aynsley, R. M. (1986). “Politics of pedestrian level urban wind control.” paper presented at ASCE Annual Convention and Exposition Aerospace Division session, Boston, pp. 10.

Aynsley, R. M., Melbourne, W. H., and Vickery, B. J. (1977). “Architectural Aerodynamics.” Applied Science Publishers, London.

Aynsley, R., and Gulson, L. (1999). “Microclimate and urban planning in the humid tropics.” Papers from the RAPI 27th National Congress, Darwin.

Aynsley, R. (2001). “Wind engineering in urban planning and design.” J. Wind Eng., 89, Proc., Fifth Asia-Pacific Conference on Wind Engineering, Kyoto, Japan, 561–564.

Aynsley, R., and Su, B. (2003). “CFD Modelling of airflow for indoor comfort in the tropics.” Environment Protection Energy Solution for Sustainable Development, Proc., International Symposium on Renewable Energy, Sept, 4–17, Kuala Lumpur, Malaysia, 315–322.

Aynsley, R. (2005). “Saving energy with indoor air movement.” Intl. J. Ventilation, 4(2) September, 167–176.

Blocken, B., and Carmeliet, J. (2002). “Spatial and temporal distribution of driving rain on a low-rise building.” Wind and Structures, 5(5), 441–462.

Blocken, B., and Carmeliet, J. (2004). “A review of wind-driven rain research in building science.” J. Wind Eng. Ind. Aerodyn., 92(13), 1079–1130.

Blocken, B., Carmeliet, J., and Stathopoulos, T. (2007a). “CFD evaluation of wind speed conditions in passages between buildings – effect of wall-function roughness modifications for the atmospheric boundary layer flow.” J. Wind Eng. Ind. Aerodyn., 95(9–11), 941–962.

Blocken, B., Stathopoulos, T., and Carmeliet, J. (2007b). “CFD simulation of the atmospheric boundary layer: wall function problems.” Atmospheric Environment, 41(2), 238–252.

Bruegmann, R. (2005). “Sprawl: A compact history.” The University of Chicago Press, Chicago.

Casey, M., and Wintergerste, T. (2000). “Quality and Trust in Industrial CFD: Best Practice Guidelines.” ERCOFTAC.

Central Intelligence Agency (CIA). (2009). “The World Factbook 2009; Urbanization.” CIA, Washington DC.

Cermak, J. (1981). “Wind tunnel design for physical modeling of atmospheric boundary layers.” J. Eng. Mechanics, 107, 623–642.

Chandler, T. J. (1971). “Urban climatology and its relevance to urban design.” WMO Technical note 149, 61, Geneva.

Changnon, S. A. (1992). “Inadvertent weather modification in urban areas: lessons for global climate change.” Bulletin of the American Meteorological Society, 73(5), 619–752.

Choi, E. C. C. (1993). “Simulation of wind-driven-rain around a building.” J. Wind Eng. Ind. Aerodyn., 46–47, 721–729.

Choi, E. C. C. (1994). “Determination of wind-driven rain intensity on building faces.” J. Wind Eng. Ind. Aerodyn., 51(1), 55–69.

Cochran, L., and Howell, J. (1990). “Wind tunnel studies for aerodynamic shape of Sydney Australia.” J. Wind Eng. Ind. Aerodyn., 36(2), 801–810.

Cochran, L., and Peterka, J. (1999a). “On breached building envelopes and increased internal pressures.” Int. Conf. On Building Envelope Systems and Technologies, Ottawa, Canada.

Cochran, L. S., and Peterka, J. (1999b). “Wind Engineering into the 21^st Century.” Proc. 10th International conference on Wind Engineering, Denmark.

Comrie, A. C. (2000). “Mapping a Wind-Modified Urban Heat Island in Tucson, Arizona (with comments on integrating research and undergraduate learning).” Bulletin of the Amer. Meteorological Soc., 2417–2431.

Cowan, I. R., Castro I. P., and Robins, A. G. (1997). “Numerical considerations for simulations of flow and dispersion around buildings.” J. Wind Eng. Ind. Aerodyn., 67–68, 535–545.

Davenport, A.G., and Isyumov, N. (1967). “A wind tunnel study for the United States Steel Building.” BLWT-5-1967.

Dawson, P., Stock, D. E., and Lamb, B. (1991). “The numerical simulation of airflow and dispersion in three-dimensional atmospheric recirculation zones.” J. Applied Meteorology, 30(7), 1005–1024.

de Dear, R. J., and Brager, G. S. (2001). “The adaptive model of thermal comfort and energy conservation in the build environment.” International Journal of Biometeorology, 45 (2), 100–108.

Evans, J. M., and De Schiller, S. (1996). “Application of microclimate studies in town planning: a new capital city, and existing urban district and urban river front development.” Atmospheric Environment, 30(3), 361–364.

Franke, J., Hirsch, C., Jensen, A. G., Krüs, H. W., Schatzmann, M., Westbury, P. S., Wisse, J. A., Miles, S. D., and Wright, N. G. (2004). “Recommendations on the use of CFD in wind engineering.” Proc., International Conference on Urban Wind Engineering and Building Aerodynamics, May 5–7, von Karman Institute, Sint-Genesius-Rode, Belgium.

Franke, J., Hellsten, A., Schlünzen, H., and Carissimo, B. (2007). “Best practice guideline for the CFD simulation of flows in the urban environment”. COST Action 732: Quality Assurance and Improvement of Microscale Meteorological Models.

Givoni, B. (1997). “Climate Considerations in Building and Urban Design.” Wiley, New York.

Golany, G. (1995). “Ethics and urban design: culture, form, and environment.” John Wiley Sons, New York.

Hargreaves, D. M., and Wright, N. G. (2007). “On the use of the k–ε model in commercial CFD software to model the neutral atmospheric boundary layer.” J. Wind Eng. Ind. Aerodyn., 95(5), 355–369.

Hartman, J. (2001). “Wind Engineering: Researching study potential of wind-powered buildings.” Civil Engineering, 71(11), 12.

Heisler, G. H. (1990). “Mean wind speed below building height in residential neighborhoods with different tree densities.” ASHRAE Transactions, 96(l), 1389–1396.

Huang, Y. J., Akbari, H., and Taha, H. (1990). “The wind-shielding and shading effects of trees on residential heating and cooling requirements.” ASHRAE Transactions, 96(1), 1403–1411.

ICUC. (1999). Proc., International Conference on Urban Climatology (CD-ROM), University, of Sydney, Australia, 8–12 November.

Irwin, P. (l981). “A simple omni-directional sensor for wind-tunnel studies of pedestrian-level winds.” J. Wind Eng. Ind. Aerodyn., 7, 219–239.

Isyumov, N. (1972). “Wind tunnel methods of evaluating wind effects on buildings and structures.” Int. Symp. on Exp. Mech., University of Waterloo.

Isyumov, N. and Davenport, A. G. (1975). “The effects of wind on people in the vicinity of buildings,.” Proc. 4th Int. Conf. on Wind Effects on Buildings and Structures, London, Cambridge University Press.

Isyumov, N., Jandali, T., and Davenport, A. G. (1976). “Model studies and the prediction of full scale levels of stack gas concentration.” APCA Journal, 26(10), 956–964.

Isyumov, N. (1982). “The aeroelastic modeling of tall buildings.” Wind Tunnel Modelling for Civil Engineeing Applications, Proc., International Workshop on Wind Tunnel Modelling Criteria and Techniques in Civil Engineering Applications, Gaithersbury, Maryland. USA.

Isyumov, N., Helliwell, S., Rosen, S., and Lai, D. (1985). “Wind in Cities: Effects on Pedestrians and the Dispersion of Ground Level Pollutants”, 6th Colloquium on Industrial Aerodynamics, Aachen, Germany.

Jiang, Y., Xing, H., Straub, C., Chen, Q., Scott, A.M., Glicksman, L.R., and Norford, L.K. (2005). “Design of natural ventilation and outdoor comfort by a team of architects and engineers with the CFD technique. Sustainable urban housing in China, http://chinahousing.mit.edu/english/projects/beijingstar_site/index.html (Dec 24, 2010).

Joubert, P. (1973). “Discussion on wind effects in modem cities.” in Aynsley, R. (1973). “The environment around tall buildings.” Proc., Twetfth Regional Conference on Tall Buildings, Sydney. Joint Committee on Tall Buildings, Lehigh University, Bethlehem PA, 305–308.

Johnson, G. (1999). “An investigation of the dispersive properties of an urban canyon wind flow model.” Proc., 15’h International Congress of Biometeorology International Conference on Urban Climatology, Wesley Conference Centre, University of Sydney.

Keeble, E. (1990). “The potential of land-use planning and development control.” Energy and Buildings, 15–16, 823–836.

Koppes, W. (1970). “Design wind loads for building wall elements.” U.S. Dept. of Commerce, National Bureau of Standards, Wind Loads on Buildings and Structures, Building Science Series, 30, 9–18.

Laar, M. (2004). “The revitalization of central city areas as a means for urban sustainability - Case study: Harbour of Rio de Janeiro.” Proc., Plea 2004 - The 21th Conference on Passive Low Energy Architecture, Eindhoven, NL, 1–6.

Landsberg, H. E. (1981). “The urban climate.” International Geophysics Series, 28, Academic Press, New York.

Lawson, T. V. (1973). “The wind environment of buildings: a logical approach to the establishment of criteria.” Report No. TVL 7321, University of Bristol, Department of Aeronautic Engineering, Bristol, England.

Lee, B. E., Hussain, M., and Soliman, B. (1980). “Predicting natural ventilation forces upon low rise buildings.” ASHRAE Journal, 35–39.

Lee, S. (1998a). “Natural ventilation and medium density house forms in the tropics.” Proc., 32nd Annual Conference of the Australia and New Zealand Architectural Science Association (ANZ4ScA), School of Architecture, Wellington University, New Zealand, 153–161.

Lee, S. (1998b). “Natural ventilation and medium density house forms in the tropics.” Ph.D thesis, James Cook University, Australia.

Leitl, B. M., Kastner-Klein, P., Rau, M., and Meroney, R. N. (1997). “Concentration and flow distributions in the vicinity of U-shaped buildings: wind-tunnel and computational data.” J. Wind Eng. Ind. Aerodyn., 67–68, 745–755.

Li, Y., and Stathopoulos, T. (1997). “Numerical evaluation of wind-induced dispersion of pollutants around a building.” J. Wind Eng. Ind. Aerodyn., 67–68, 757–766.

Liddament, M., Axley, J., Heiselberg, P., Li, Y., and Stathopoulos, T. (2006). “Achieving natural and hybrid ventilation in practice.” International Journal of Ventilation, 5(1), 115–130.

Livesey, F., Inculet, D., Isyumov, N., and Davenport, A. G. (1990). “A scour technique for the evaluation of pedestrian winds.” J. Wind Eng. Ind. Aerodyn., 36(2), 779–789.

McBoyle, G. R. (1970). “Observations on the effect of a city’s form and functions on temperature patterns.” NZ Geographer, 26(2), 145–150.

Melbourne, W.H. (1978). “Criteria for environmental wind conditions.” J. Wind Eng. Ind. Aerodyn., 3(2–3), 241–249.

Meroney, R. N., Leitl, B. M., Rafailidis. S., and Schatzmann, M. (1999). “Wind-tunnel and numerical modeling of flow and dispersion about several building shapes.” J. Wind Eng. Ind. Aerodyn., 81, 333–345.

Meroney, R. N., Letchford, C. W., and Sarkar, P. P. (2002). “Comparison of numerical and wind tunnel simulation of wind loads on smooth, rough and dual domes immersed in a boundary layer.” Wind and Structures, 5(2–4), 347–358.

Meroney, R. N. (2004). “Wind tunnel and numerical simulation of pollution dispersion: a hybrid approach.” Working paper, Croucher Advanced Study Insitute on Wind Tunnel Modeling, Hong Kong University of Science and Technology.

Meroney, R. N. (2006). “CFD prediction of cooling tower drift.” J. Wind Eng. Ind. Aerodyn., 94(6), 463–490.

Meroney, R. N. (2008). “Protocol for CFD prediction of cooling tower drift in an urban environment.” J. Wind Eng. Ind. Aerodyn., 96(10–11), 1789–1804.

Mochida, A., Tominaga, Y., Murakami, S., Yoshie, R., Ishihara, T., and Ooka, R. (2002). “Comparison of various k-ε models and DSM applied to flow around a high-rise building - report on AIJ cooperative project for CFD prediction of wind environment.” Wind and Structures, 5(2–4), 227–244.

Murakami, S., Mochida, A., Hayashi, Y., and Sakamoto, S. (1992). “Numerical study on velocity-pressure field and wind forces for bluff bodies by k-ε, ASM and LES.” J. Wind Eng. Ind. Aerodyn., 44(1–3), 2841–2852.

Murakami, S. (1993). “Comparison of various turbulence models applied to a bluff body.” J Wind Eng. Ind. Aerodyn., 46/47, 21–36.

Murakami, S., Ooka, R., Mochida, A., Yoshida, S., Kim, S. (1999). “CFD analysis of wind climate from human scale to urban scale.” J. Wind Eng. Ind. Aerodyn,, 81(1–3), 57–81.

NRC. (2003). “Tracking and Predicting the Atmospheric Dispersion of Hazardous Material Releases: Implications for homeland security.” Atmospheric Dispersion of Hazardous Material Releases, Board on Atmospheric Sciences and Climate, Division on Earth and Life Sciences, National Research Council, National Academies Press, Washington, DC.

Numez, M., and Oke, T. R. (1977). “The energy balance of an urban canyon.” J. Applied Meteorology, 16(1), 11–9.

Oke, T. R. (1979). “Review of urban climatology. 1973–1976.” Technical Note, 169, World Meteorological Organization, Geneva, Switzerland.

Oke, T., Johnson, G. T., Steyn, D. G., and Watson, I. D. (1991). “Simulation of surface urban heat islands under ‘ideal’ conditions at night. Part 2: Diagnosis of causation.” Boundary-Layer Meteorology, 56(4), 339–358.

Olgyay, V. (1992). “Design with Climate: A bioclimatic approach to architectural regionalism.” Van Nostrand Reinhold, New York.

Oliveira, P. J., and Younis, B. A. (2000). “On the prediction of turbulent flows around full-scale buildings.” J. Wind Eng. Ind. Aerodyn., 86(2–3), 203–220.

Petersen, R., Cermak, J., and Nelson, R. (1980). “Simulation of pollutant dispersion in the mountain wind.” Proc., 2nd Joint Conference on Applications of Air Pollution Meteorology, 40–545, American Meteorological Society, Boston, MA.

Potangaroa, R., and Aynsley, R. (2000). “A tale of four cities: the potential for achieving thermal comfort using natural ventilation in high rise buildings in four Asian cities.” Proc., Roomvent 2000, Air Distribution in Rooms: Ventilation for Health and Sustainable Environment, 2, 807–811.

Potangaroa, R. (2001). “The Natural Ventilation of High Rise Buildings in the Tropics.” Ph.D. Thesis, Australian Institute of Tropical Architecture, James Cook University, Townsville Australia.

Richards, P. J., and Hoxey, R. P. (1992). “Computational and wind-tunnel modelling of mean wind loads on the Silsoe structures building.” J. Wind Eng. Ind. Aerodyn., 43(1–3), 1641–1652.

Richards, P. J., Mallison, G. D., McMillan, D., and Li, Y. F. (2002). “Pedestrian level wind speeds in downtown Auckland.” Wind and Structures 5(2–4), 151–164.

Saitoh, T. S., Shimada, T., and Hoshi, H. (1996). “Modeling and simulation of the Tokyo urban heat island.” Atmospheric Environment, 30(20), 3431–3442.

SethuRaman, S., and Cermak, J. E. (1974). “Physical modeling of flow and dispersion over an urban heat island.” Advances in Geophysics, 18b, 223–240. Academic Press, New York.

SethuRaman, S., and Cermak, J. E. (1975). “Mean temperature and mean concentration distributions over a physically modelled three-dimensional heat island for different stability conditions.” Boundary-Layer Meteorology, 9(4), 427--440.

Soligo, M. J, Irwin, P. A., Williams, C. J., and Schuyler, G. D. (1998). “A comprehensive assessment of pedestrian comfort including thermal effects.” J. Wind Eng. Ind. Aerodyn,, 77–78(1),753–766.

Stathopoulos, T., Wu, H., and Bedard, C. (1992). “Wind environment around buildings: A knowledge-based approach.” J. Wind Eng. Ind. Aerodyn,, 44(1–3), 2377–2388.

Stathopoulos, T., and Zhou, Y. S. (1993). “Numerical simulation of wind-induced pressures on buildings of various geometries.” J. Wind Eng. Ind. Aerodyn., 46–47, 419–430.

Stathopoulos, T., Chiovitti, D., and Dodaro, L. (1994). “Wind shielding effects of trees on low buildings.” Buildings and Environment, 29(2), 141–150.

Stathopoulos, T., and Baskaran, B. A. (1996). “Computer simulation of wind environmental conditions around buildings.” Engineering Structures 18(11), 876–885.

Stathopoulos, T. (1997). “Computational wind engineering: Past achievements and future challenges.” J. Wind Eng. Ind. Aerodyn., 67–68, 509–532.

Sun, S. (1989). “Principal component analysis of air pollutant sources in Xiamen, China.” China Envir. Sci,, 10, 23–41.

Sundsbo, P. A. (1998). “Numerical simulations of wind deflection fins to control snow accumulation in building steps.” J. Wind Eng. Ind. Aerodyn., 74(6), 543–552.

Tang, W., and Davidson, C. I. (2004). “Erosion of limestone building surfaces caused by wind-driven rain: 2. Numerical modeling.” Atmospheric Environment, 38(33), 5601–5609.

The Globe Mail. (1983). Toronto. 2/3 December.

Thiis, T. K. (2000). “A comparison of numerical simulations and full-scale measurements of snowdrifts around buildings.” Wind and Structures 3(2), 73–81.

Tominaga, Y., Murakami, S., and Mochida, A. (1997). “CFD prediction of gaseous diffusion around a cubic model using a dynamic mixed SGS model based on composite grid technique.” J. Wind Eng. Ind. Aerodyn., 67–68, 827–841.

Tschanz, T., and Davenport, A. G. (1983). “The base balance technique for the determination of dynamic wind loads.” J. Wind Eng. Ind. Aerodyn., 13(1–3), 429–439.

USDHS. (2005). “Urban Dispersion Program; New York City - August 2005 Field Study.” US Department of Homeland Security, 2pp. Rev. ed. Ventilation, 5, 1, 115–130.

van Hooff, T., and Blocken, B. (2010). “Coupled urban wind flow and indoor natural ventilation modeling on a high-resolution grid: a case study for the Amsterdam ArenA stadium.” Environmental Modelling Software, 25(1), 51–65.

Vickery, P. (1992). “A comparison of measured and predicted surface level wind speeds in an urban environment.” Proc. ASCE Structures Congress’92, San Antonio, TX, 356–359.

Vitruvius, P. (1960). “The Ten Books on Architecture.” translated by Morgan Morris Hickey, Dover, New York.

Wedding, J. B., Lombardi, D. J., and Cermak, J. E. (1977). “Wind tunnel study of gaseous pollutants in city street canyons.” J. Air Pollution Control Association, 27(6), 557–566.

Weihe, W. H. (1985). “Life expectancy in tropical climates and urbanization.” World Climate Technical Conference, World Meteorological Organization 652, Geneva, 313–353.

Williams, C. J., Soligo, M. J., and Cote, J. (1992). “A discussion of the components for a comprehensive pedestrian level comfort criteria”, J. Wind Eng. Ind. Aerodyn., 41(44), 2389–2390.

Wilson D. (1989). “Airflow around buildings.” 4SHR, 4E Handbook of Fundamentals, pp. 14.1–14.18.

WMC. (1995). International Congress on Urban Climates. Essen, Germany. http://www.wmo.ch/web/Press/cities.html

WRP. (1996). “World Resources Report 1996–97: The urban environment.” World Resources Institute in Collaboration with the United Nations Environment Programme, the United Nations Development Programme, and the World Bank, Oxford University Press, New York.

Yang, W., Quan, Y., Jin, X., Tamura, Y., and Gu, M. (2008). “Influences of equilibrium atmosphere boundary layer and turbulence parameter on wind load of low-rise buildings.” J. Wind Eng. Ind. Aerodyn., 96(10–11), 2080–2092.

Yeang, K. (1987). “The tropical verandah city: some urban design ideas for Kuala Lumpur.” 2nd ed. Longman, U.K.

Yoshie, R., Mochida, A., Tominaga, Y., Kataoka, H., Harimoto, K., Nozu, T., and Shirasawa, T. (2007). “Cooperative project for CFD prediction of pedestrian wind environment in the Architectural Institute of Japan.” J. Wind Eng. Ind. Aerodyn., 95(9–11), 1551–1578.