Back Matter

Allwine, K. J., Shinn, J. H., Streit, G. E., Clawson, K. L., and Brown, M. (2002). “Overview of URBAN 2000: a multiscale field study of dispersion through an urban environment.” American Meteorological Society, 521–536.

ASCE. (1980). “Wind Loading and Wind Effects, Council on Tall buildings.” Committee 9, Chapter CL-3, Vol. CL of Monograph on Planning and Design of Tall Buildings, ASCE, NY.

Auliciems, A., and Szokolay, S. V. (1997). “Thermal Comfort.” PLEA Note # 3, Passive and Low Energy Architecture International in association with the University of Queensland, Dept. of Architecture, Brisbane, 45–64.

Australian Government, Bureau of Meteorology. (2005). “Sustainable Urban Design and Climate.” http://www.bom.gov.au/climate/environ/design/design_c.shtml

Awang, A., Salim, M., and Halldane, J. (1994). “Environmental and urban management in southeast Asia.” Urban Habitat and Highrise Monograph. Institute Sultan Iskandar, Johor.

Awbi, H. B. (Ed.) (2000). “Air Distribution in Rooms; ventilation for health and sustainable environment.” ROOMVENT 2000; Proc., 7th International Conference on Air Distribution in Rooms, Reading, U. K., Amsterdam, Elsevier, 2 vols.

Aynsley, R, M., (1989). “Politics of Pedestrian Level Urban Wind Control.” Building Environment, 24(4), 291–29.

Aynsley, R., and Gulson, L. (1999). “Microclimate and urban planning in the humid tropics.” Papers from the RAPI 27th National Congress.

Aynsley, R. (2003). “Urban Planning and Design; the big picture.” Proc., ASCE Conference, Nashville.

Blackmore, B., and Xu, W. (2006). “Guidelines for accurate clean room CFD modeling: All relevant physics and heat sources must be considered.” Clean Rooms Newsletter, May.

Bosselmann, P., Arens, E., Dunker, K., and Wright, R. (1995). “Urban form and Climate: Case study, Toronto.” APA Journal Spring, 226–239.

Brown, G. Z., Dekay, M. and Barbhaya, D. (2000). “Sun, wind and light: architectural design strategies.” 2nd edition, John Wiley and Sons.

Buhagiar, V., and Jones, P. (2002). “The influence of microclimate in an urban context: natural ventilation regimes in refurbished historic buildings using CFD.” Proc., World Renewable Energy Congress VII, Cologne, Germany, Elsevier.

Castro, I. P., Cowan, I. R., and Robins, A. G. (1999). “Simulations of flow and dispersion around buildings.” Journal of Aerospace Engineering, 12(4), 145–160.

Cermak, J. (1992). “Physical modeling of thermal effects on flow and dispersion over urban areas.” Atmospheric Environment, 30(3), 393–402.

Cermak, J. E., and Davenport, A. G. (1994). “Wind Climate in Cities.” Proc., NATO Advanced Studies Institute, Waldbroon, Germany, NATO Science Series: E: Applied Sciences.

Cermak, J. E. (1996). “Thermal effects on flow and dispersion over urban areas: Capabilities for prediction by physical modeling.” Atmospheric Environment 30(3), 393–401.

Chaniz, J. C., Hanna, S. R., Boybeyi, Z., and Franzese, P. (2005). “Use of Salt Lake City URBAN 2000 field data to evaluate the urban hazard prediction assessment capability (HPAC) dispersion model.” American Meteorological Society, 485–501.

Chappell, J. (2000). “The Next Stage of Ecological Urban Design: a Response.” Planning Urban Research Assoc., San Francisco.

Cochran, L., and Irwin, P. (1999). “Microclimate design features for buildings and landscaping.” Proc., Structural Engineering in the 21st Century, Structures Congress, New Orleans, edited by Avent Richard and Alawady Mohamed, 1051–1054.

Cochran, L. (2006). “State of the art review of wind tunnels and physical modelling to obtain structural loads and cladding pressures.” Architectural Science Review, 49(1), 7–16.

Cowan, H. J. (Ed.) (1991). “Handbook of Architectural Technology.” Chapter 10, ‘Wind Effects’, van Nostrand Reinhold, NY, 133–147.

Cowan, I. R., Castro, I. P., and Robins, A. G. (1997). “Numerical considerations for simulations of flow and dispersion around buildings.” J. Wind Eng. Ind. Aerodyn., 6768, 535–545.

Cowan, R. (2002). “Urban design guidance: Urban design frameworks, development briefs and master plans.” Thomas Telford Ltd, London.

Davenport, A. G., and Isyumov, N. (1967). “The application of the boundary layer wind tunnel to the prediction of wind loading.” Proc., International Research Seminar on Wind Effects on Buildings and Structures. Ottawa, Canada.

de Assis, E. S., and Frota, A. B. (1999). “Urban bioclimatic design strategies for a tropical city.” Atmospheric Environment, 33(24–25), 4135–4142.

de Bruyn Kops, S. M., and Riley, J. J. (2000). “Re-examining the thermal mixing layer with numerical simulations.” Phys. Fluids, 12(1), 185–192.

de Dear, R. J., and Brager, G. S. (1998). “Developing an adaptive model of thermal comfort and preference.” American Society of Heating, Refrigerating and Air-Conditioning Engineers, Inc., ASHRAE Transactions, 104(1), 27–49, Atlanta.

de Dear, R. J., and Potter, J. G. (Eds.) (1999). Proc., International Congress of Biometeorology and International Conference on Urban Climatology (CD-ROM), Sydney, Macquarie University.

De Schiller, S., and Evans, J. M. (1996). “Training architects and planners to design with urban microclimates.” Atmospheric Environment, 30(3), 449–454.

Deosthali, V. (1999). “Assessment of impact of urbanization on climate: an application of bio-climatic index.” Atmospheric Environment, 33(24), 4125–4133.

Devereux, J., and Pedersen, M. C. (2004). “How buildings breathe.” Metropolis, March, 102–105.

Durgin, F. H. (1992). “Pedestrian level wind studies at the Wright Brothers Facility.” in Progress in Wind Engineering, Proc., 8th International Conference on Wind Engineering, London, Ont., July 8–12, Elsevier, edited by Davenport A., Isyumov N., King J., Novak M., Surry D., and Vickery B., Part 4, 2253–2264.

Elnahas, M. M. (1992). “Energy saving through urban design.” Proc., Workshop on Environmentally Sound Technologies for heating and cooling in human settlements, Dept. of Mechanical Engineering, James Cook University, Townsville, Australia.

Elnahas, M. M. (1999). “How do planners and architects deal with conflicting climate design objectives?” Proc., PLEA ‘99 Conference, 225–230.

Elnahas, M. M. (2001). “The Effects of Urban Configuration on Urban Air Temperatures.” Architectural Science Review, 46(22), 135–139.

Evans, J. M., and De Schiller, S. (1996). “Application of microclimate studies in town planning: a new capital city, and existing urban district and urban river front development.” Atmospheric Environment, 30(3), 361–364.

Goncalces da Silva, F. et al. (2001). “The wind as a true design tool in urban planning”. Proc., 18th International on Passive and Low Energy Architecture, Florianopolis, Brazil, 229–233.

Heisler, G. M. (1990). “Mean wind speed below building height in residential neighborhoods with different tree densities.” ASHRAE Transactions, 96, 1389–1396.

Holper, P. (1999). “Transport, clean air and design options for cities of the future.” Building Innovation and Construction Technology, 8.

Hostikka, S. (2005). “State of the art of CFD fire models.” Proc., 10th Int. Fire Protection Symposium on Methods of Fire Safety Engineering, Hanover.

Hussain, M., and Lee, B. E. (1980). “A wind tunnel study of the mean pressure forces acting on large groups of low-rise buildings.” J. Wind Eng. Ind. Aerodyn., 6(3–4), 207–225.

Hunt, J. C. R., Grinchenko, V., and Gayev, Y. A (2004). “Flow and Transport Processes in Complex Obstructed Geometries: from cities and vegetative canopies to engineering problems.” Proc., NATO Advanced Study Institute.

Institute Sultan Iskandar, Universiti Teknologi Malaysia. (1994). “Towards better buildings in the tropics.” Proc., ISI-UTM International convention and exposition, Kuala Lumpur, ISI-UTM.

Irwin, P. (2002). “Use of scale model and computational techniques to predict wind and snow loading.” Proc., 2002 Structures Congress Exposition, Denver, CO, ASCE Press, Reston, VA., 431–432.

Isyumov N., and Davenport, A. G. (1975). “Ground level wind environment in built-up areas.” Proc., 4th International Conference on Wind Effects on Buildings and Structures, Heathrow, UK., 403–422.

Isyumov, N., Jandali, T., and Davenport, A.G. (1976). “Model studies and the prediction of full scale levels of stack gas concentration.” APCA Journal, 26 (10), 956–964.

Isyumov, N. (1982). “The aeroelastic modeling of tall buildings.” Reinhold T.A. (Ed.), Wind Tunnel Modeling for Civil Engineering Applications, Cambridge University Press, Cambridge, 373–407.

Isyumov, N., Helliwell, S., Rosen, S., and Lai, D. (1985). “Wind in Cities: Effects on pedestrians and dispersion of ground level pollutants.” 6th Colloquium on Industrial Aerodynamics, Aachen, Germany.

Isyumov, N., and Liversey, F. (1992). “The influence of relative height of a new building on the local wind environment.” Proc., ASCE Structures Congress’92, San Antonio, TX. 360–367.

Jain, A., Hart, G. C., Balcom, R. W., and Raggett, J. D. (2001). “Enhancement of natural ventilation at Honolulu International Airport.” Proc., 2001 Structures Congress Exposition, Washington, DC, CD published by ASCE Press, Reston, VA., 9.

Jamal, I., and Breukleman, B. (2003). “Towers: Skybridge engineering, construction and monitoring.” Proc., 2003 Structures Congress Exposition, Seattle, WA. ASCE Press, Reston, VA., 14.

Jamieson, N. J., Carpenter, P., and Cenek, P. D. (1992). “The effect of architectural detailing on pedestrian level wind speeds.” J. Wind Eng. Ind. Aerodyn., 44(1–3), 2301–2312.

Janssens, M. L. (2002). “Computer Fire Models.” Fire Protection Engineering, 13, 21–24.

Jiang, Y., Xing, H., Straub, C., Chen, Q., Scott, A. M., Glicksman, L. R., and Norford, L. K. (2000). “Design of Natural Ventilation and Outdoor Comfort by a Team of Architects and Engineers with the CFD Technique.” Proc., ISHVAC ‘99, China, 591–601.

Jones, N., Main, J., and Spangler, W. (2003). “Full-scale measurements on structures: experiences and reflections.” Proc., 2003 Structures Congress Exposition, Seattle, WA. ASCE Press, Reston, VA.

Kenworthy, A. T. (1985). “Wind as an influential factor in the orientation of the orthogonal street grid.” Building and Environment, 20(1), 33–38.

Kijewski-Correa, T., Kilpatrick, J., Kareem, A., Kwon, D. K., Bashor, R., Kochly, M., Young, B. S., Abdelrazaq, A., Galsworthy, J., Isyumov, N., Morrish, D., Sinn, R. C., and Baker, W.F. (2006). “Validating the wind –induced response of tall buildings: Synopsis of the Chicago full-scale monitoring program.” J. Struct. Eng., 132(10), 1509–1523.

Kim, J. J., and Baik, J. J. (2001). “Urban street-canyon flows with bottom heating.” Atmospheric Environment, 35(20), 3395–3404.

Knowles, R. L. (1981). “Energy and Form: An ecological approach to urban growth.” MIT Press, Cambridge, MA.

Kondo, Y. et al. (1993). “Natural Ventilation of High-Rise Buildings with Large Light Wells. Room Air Convection and Ventilation Effectiveness.” In Murakami, S. et al., ed. Room Air Convection and Ventilation Effectiveness, Atlanta, ASHRAE, 461–466.

Kwok, K. C. S., and Bridgman, H. A. (1980). “Wind tunnel model study of environmental wind conditions around buildings.” Architectural Science Review, 23(3), 57–62.

Laar, M. (2004). “The revitalization of central city areas as a means for urban sustainability - Case study: Harbour of Rio de Janeiro.” Proc., Plea2004 - The 21th Conference on Passive Low Energy Architecture, Eindhoven, NL, 1–6.

Levitan, M. L. (2005). “Hurricane engineering: A new curriculum for a planet at risk.” Proc., 2005 Structures Congress Exposition, New York NY, ASCE Press, Reston, VA.

Li, Q. S., Xiao, Y. Q., Wong, C. K., and Jeary, A. P. (2004). “Field measurements of typhoon effects on a super tall building.” Engineering Structures, 26(2), 233–244.

Livesey, F., Inculet, D., Isyumov, N., and Davenport, A. G. (1989). “A scour technique for the evaluation of pedestrian winds.” Proc. 6th U.S. National Conference on Wind Engineering (WERC), Houston, Texas.

Livesey, F., Morrish, D., and Isyumov, N. (1992). “Enhanced scour tests to evaluate pedestrian level winds”. Progress in Wind Engineering, Proc., 8th International Conference on Wind Engineering, London, Ont., Elsevier, edited by Davenport A., Isyumov N., King J., Novak M., Surry D., and Vickery B., Part 4, 2265–2276.

Lu, W. Z., Yuen, K. K., Lo, S. M., and Fang, Z. (2002). “Impact of Floor Planning on Airflow Patterns in Designated Refuge Floor in High-Rise Building.” J. Arch. Eng., 8(4), 108–115.

Maki, E. (1996). “Wind, machine, and architecture.” Proc., 5th International Conference on Air Distribution in Rooms ROOMVENT ‘96, Yokohama, Japan, edited by Murakami Shuzo, 11–20.

Meroney, R. N. (2004). “Fires in Porous Media: Natural and Urban Canopies.” NATO Advanced Study Institute on Flow and Transport Processes in Complex Obstructed Geometries; from cities and vegetative canopies to industrial problems, Kiev, Ukraine.

Mehta, K. C., and Delahay, J. (2003). “Guide to the use of the wind load provisions of ASCE 7–02.” ASCE Press, Reston, VA.

Mehta, K. C. (2005). “Multidisciplinary education in wind science and engineering.” Proc., 2005 Structures Congress Exposition, New York, NY, ASCE Press, Reston, VA.

Melbourne, W., and Eddy, M. (2002). “Super-tall apartment towers and the vented façade.” Proc., 2002 Structures Congress Exposition, Denver CO, ASCE Press, Reston, VA. 121–122.

Mendonca, P., Mendonca, J., and Braganca, L. (2001). “Planning through environmental strategies.” Proc., PLEA 2001 International conference on “ Passive and Low Energy Architecture”, Florianopolis, Brazil, 599–600.

Meroney, R. N., Neff, D. E., Chang, C. H., and Predoto, R. (2002). “Computational fluid dynamics and physical model comparisons of wind loads and pedestrian comfort around a high rise building.” Proc., 2002 Structures Congress Exposition, April 4–6, Denver, CO, ASCE Press, Reston, VA, 117–118.

Mertens, E. (1999). “Bioclimate and city planning – open space planning”. Atmospheric Environment, 33(24–25), 4115–4123.

Murakami, S., Kato, S., and Yohoi, M. (1994). “Micro/macroscopic analysis of airmass, heat and energy transport within an enclosure.” Proc., 4th Int. Conf. on Air Distribution in Rooms (Roomvent’94), Poland.

Murakami, S. (1997). “Current status and future trends in computational wind engineering.” J. Wind Eng. Ind. Aerodyn., 67–68, 3–34.

Murakami, S. (2004). Proc., 1st International COE Symposium on Wind Effects on Buildings and Urban Environment, Science Council, Tokyo.

Nieuwolt, S. (1996). “Design for climate in hot, humid cities.” Paper presented at New urban forms, new housing forms diverse paths of change in the Asia pacific region; a joint conference on Research Committee 21, Brisbane, University of Queensland

Ok, V., and Aygun, M. (1995). “The variation of wind speeds with building density in urban areas.” Architectural Science Review, 38(2), 87–95.

Overcamp, T. J. (2001). “A review of the conditions leading to downwash in physical modeling experiments.” Atmospheric Environment, 35(20), 3503–3508.

Reinhold, T. A. (Ed.) (1982). “Wind Tunnel Modelling for Civil Engineering Applications.” Proc., International workshop on wind tunnel modeling Criteria and Techniques in Civil Engineering Applications, Gaithersburg, Maryland, USA, University Microfilms International.

Ruegg, F. W. (1996). “Storm-driven trajectories of rain near balconies on tall building.” J. Arch. Eng., 2(3), 100–106.

Saitoh, T. S., Shimada, T., and Hoshi, H. (1996). “Modeling and simulation of the Tokyo urban heat island.” Atmospheric Environment, 30(20), 3431–3442.

Shiraishi, Y., Murakami, S., Kato, S., Ikaga, T., Kim, T., Song, D., and Hirano, T. (2001). “Evaluation of wind breeze properties of city-block-scale voids by using local ventilation efficiency index.” Journal of Wind Engineering, 89, 293–296.

Sopian, K et al. (1999). “Research development and commercialization of renewable energy for a clean environment.” WREC’99; Proc., World renewable Energy congress ‘99, Kuala Lumpur, 8–11 June, Kuala Lumpur, WREC Malaysia.

Stathopoulos, T., Chioviti, D., and Dodaro, L. (1994). “Wind shielding effects of trees on low buildings.” Building and Environment, 29(2), 141–150.

Stathopoulos, T., and Wu, H. (1995). “Generic models for pedestrian-level winds in built-up regions.” J. Wind Eng. Ind. Aerodyn., 54–55, 515–525 (abstract only).

Stathopoulos, T. (1997). “Computational wind engineering: Past achievements and future challenges.” J. Wind Eng. Ind. Aerodyn., 67–68, 509–532.

Tso, C. P. (1996). “A survey of urban heat island studies in two tropical cities.” Atmospheric Environment, 30(3), 507–519.

Tsutsumi, J., and Bornstein, R. (Eds.) (1992). “Urban Atmosphere.” Proceedings of Conference on the Urban Thermal Environmental Studies, Tohwa (CUTEST), Atmospheric Environment 30 (3).

Tsutsumi, J. I., Katayama, T, Hayashi, T., Kitayama, H., and Ishii, A. (1991). “Statistical analysis for the characteristics of sea-land breeze and its effect on urban thermal environment.” Energy and Buildings, 16(3–4), 1003–1008.

Tschanz, T., and Davenport, A. G. (1983). “The base balance technique for the determination of dynamic wind loads.” J. Wind Eng. Ind. Aerodyn., 13. 429–439.

Ward, I. C. (2003). “The usefulness of climatic maps of built-up areas in determining drivers for the energy and environmental efficiency of buildings and external areas.” International Journal of Ventilation, 2(3), 277–285.

Wright, N. G., and Easom, G. J. (2003). “Non-linear k–epsilon turbulence model results for flow over a building at full-scale.” Applied Mathematical Modelling 27(12), 1013–1033.

Yeang, K. (1987). “The tropical verandah city: some urban design ideas for Kuala Lumpur.” 2nd ed. Longman, U.K.

Yeang, K. (1996). “The skyscraper: Bioclimatically considered: A design primer.” The Academy Group, Architectural Design, London.

Yeang, K. (1999). “The green skyscraper: The basis for designing sustainable intensive buildings.” Prestel, Germany.

Yoshie, R. (2001). “Energy conservation effects of natural ventilation by wind in office buildings.” Journal of Wind Engineering, 89, October, 297–300.