Chapter 6
Fundamentals of Fluvial Geomorphology
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Ackers, P., and Charlton, F. G. (1970a). “Meander geometry arising from varying flows.” J. Hydrology, 11, 230–252.
Ackers, P., and Charlton, F. G. (1970b). “The geometry of small meandering streams.” Proc., Institution of Civil Engineers, Supplements, Paper 7328S, 289–317.
Andrews, E. D. (1980). “Effective and bank-full discharges of streams in the Yampa River Basin, Colorado and Wyoming,” J. Hydrology, 46, 311–333.
Ashworth, P. J. (1987). “Bedload transport and channel changes in gravel-bed streams.” Ph.D. thesis, University of Stirling, Stirling, Scotland.
Baker, V. R. (1977). “Stream-channel response to floods, with examples from Central Texas.” Bulletin, Geological Society of America, 88, 1057–1071.
Benson, M. A., and Thomas, D. M. (1966). “A definition of dominant discharge.” Bulletin, International Association of Scientific Hydrology, 11, 76–80.
Biedenharn, D. S. (1984). “Channel response on the Little Tallahatchie River downstream of Sardis Dam.” Meandering Rivers, Elliott C. M., C. M. ed., ASCE, New York, 500–509.
Biedenharn, D. S. (1995). “Lower Mississippi River channel response: Past, present, and future.” Ph.D. dissertation, Department of Civil Engineering, Colorado State University, Fort Collins, Colo.
Biedenharn, D. S., Combs, P. G., Hill, G. J., Pinkard, C. F., and Pinkstone, C. B. (1989). “Relationship between channel migration and radius of curvature of the Red River.” Proc., International Symposium, Sediment Transport Modeling, ASCE, New York, 536–641.
Biedenharn, D. S., and Watson, C. C. (1997). “Stage adjustment in the lower Mississippi River, USA.” Regulated Rivers: Research & Management, 13, 517–536.
Biedenharn, D. S., Copeland, R. C., Thorne, C. R., Soar, P. J., Hey, R. C., and Watson, C. C. (2000a). “Effective discharge calculation: A practical guide.” Technical Report ERDC/CHL TR-00-15, U.S. Army Corps of Engineers, Engineer Research Development Center, Vicksburg, Miss.
Biedenharn, D. S., Thorne, C. R., and Watson, C. C. (2000b). “Recent morphological evolution of the lower Mississippi River.” Geomorphology, 34, 227–249.
Bledsoe, B. P. (1999). “Specific stream power as an indicator of channel pattern, stability, and response to urbanization.” Ph.D. dissertation, Department of Civil Engineering, Colorado State University, Fort Collins, Colo.
Bledsoe, B. P., and Watson, C. C. (2001). “Logistic analysis of channel pattern thresholds: Meandering, braiding, and incising.” Geomorphology, 38, 281–300.
Blench, T. (1952). “Regime theory for self-formed sediment bearing channels.” Transactions American Society of Civil Engineers, Paper 2499, 117, 383–400.
Blench, T. (1957). Regime behaviour of canals and rivers. Butterworth’s, London.
Blench, T. (1969). “Coordination in mobile-bed hydraulics.” J. Hydraulics Div., ASCE, 95(HY6), 1871–1898.
Bray, D. I. (1973). “Regime relations for Alberta gravel bed rivers.” Fluvial Processes and Sedimentation, Proc., Hydrology Symposium, National Research Council of Canada, Ottawa, 440–452.
Bray, D. I. (1982). “Regime equations for gravel-bed rivers.” Gravel-Bed Rivers, Hey R. D., Bathurst J. C., and Thorne C. R., eds., Wiley, Chichester, UK, 517–542.
Brice, J. C. (1975). “Airphoto interpretation of the form and behavior of alluvial rivers.” Final Report to the U.S. Army Research Office, Durham, Washington University, St. Louis, Mo.
Brice, J. C. (1984). “Planform properties of meandering rivers.” River Meandering, Wang S. Y., ed., ASCE, New York, 1–15.
Brookes, A. (1981). “Channelization in England and Wales.” Discussion Paper No. 11, Department of Geography, University of Southampton, Southampton, UK.
Burkham, D. E. (1972). “Channel changes of the Gila River in Safford Valley, Arizona, 1946–1970.” Professional Paper 655G, U.S. Geological Survey, Washington, DC.
Carling, P. A. (1991). “An appraisal of the velocity reversal hypothesis for stable pool/riffle sequences in the River Severn, England.” Earth Surface Processes and Landforms, 8, 1–18.
Carling, P. A. (1988). “The concept of dominant discharge applied to two gravel-bed streams in relation to channel stability thresholds.” Earth Surface Processes and Landforms, 13, 355–367.
Carson, M. A. (1984a). “Observations on the meandering-braided transition, Canterbury Plains, New Zealand.” New Zealand Geographer, 40, 89–99.
Carson, M. A. (1984b). “The meandering-braided river threshold: A reappraisal.” J. Hydrology, 113, 1402–1421.
Chorley, R. J., Schumm, S. A., and Sugden, D. E. (1985). Geomorphology. Methuen, New York.
Clifford, N. J. (1990). “The formation, nature and maintenance of riffle-pool sequences in gravel-bed rivers.” Ph.D. Thesis, University of Cambridge, Cambridge, UK.
Dietrich, W. E., Smith, J. D., and Dunne, T. (1984). “Boundary shear stress, sediment transport and bed morphology in a sand-bedded river during high and low flow.” Meandering Rivers, Elliott C. M., ed., ASCE, New York, 632–639.
Downs, P. W. (1995). “Estimating the probability of river channel adjustment.” Earth Surface Processes and Landforms, 20, 687–705.
Dunne, T., and Leopold, L. B. (1978). Water in Environmental Planning. Freeman, New York, San Francisco.
Dury, G. H. (1961). “Bank-full discharge: An example of the statistical relationships.” Bulletin, International Association of Scientific Hydrology, 6(3), 48–55.
Dury, G. H. (1973). “Magnitude-frequency analysis and channel morphology.” Fluvial Geomorphology, Morisawa M., ed., Allen and Unwin, London, 91–121.
Dury, G. H. (1976). “Discharge prediction, present and former, from channel dimensions.” J. Hydrology, 30, 219–245.
Einstein, H. A. (1972). “Final remarks.” Sedimentation, Symposium to Honor Professor H. A. Einstein, Shen H. W., ed., Sedimentation Symposium, Berkeley, Calif., 27-7.
Federal Interagency Stream Restoration Working Group (FISRWG). (1998). “Stream corridor restoration: Principles, processes, and practice.” FISRWG, October, <http://www.nrcs.usda.gov/technical/stream_restoration/>.
Gupta, A., and Fox, H. (1974). “Effects of high magnitude floods on channel form: A case study in Maryland piedmont.” Water Resources Research, 10(3), 499–509.
Hack, J. T., and Goodlett, J. C. (1960). “Geomorphology and forest ecology of a mountain region in the central Appalachian.” Professional Paper 347, U.S. Geological Survey, Washington, DC.
Harrelson, C. C., Rawlins, C. L., and Potyondy, J. P. (1994). “Stream channel reference sites: An illustrated guide to field technique.” General Report No. RM-245, U. S. Department of Agriculture, Forest Service, Fort Collins, Colo.
Harvey, M. D., and Watson, C. C. (1986). “Fluvial processes and morphological thresholds in incised channel restoration.” Water Research Bulletin, 3(3), 359–368.
Hey, R. D. (1975). “Design discharge for natural channels.” Science, Technology and Environmental Management, Hey R. D. and Davies T. D., eds., Saxon House, Farnborough, 73–88.
Hey, R. D. (1976). “Geometry of river meanders.” Nature, 262, 482–484.
Hey, R. D. (1988). “Mathematical models of channel morphology.” Modeling Geomorphological Systems, Anderson M. G., ed., Wiley, Chichester, 99–126.
Hey, R. D. (1990). “Design of flood alleviation schemes: Engineering and the environment.” School of Environmental Sciences, University of East Anglia, Norwich, UK.
Hey, R. D. (1997). “Channel response and channel forming discharge.” Final Report, Contract No. R&D 6871-EN-01, U.S. Army Research Office (London), University of East Anglia, Norwich, UK.
Hey, R. D., and Thorne, C. R. (1986). “Stable channels with mobile gravel beds.” J. Hydraulic Engineering, 112(8), 671–689.
Holmquist-Johnson, C. (2002). “Computational methods for determining effective discharge in the Yazoo River Basin, Mississippi.” MS thesis, Department of Civil Engineering, Colorado State University, Fort Collins, Colo.
Inglis, C. C. (1941). “Digest of answers to the Central Board of Irrigation questionnaire on meandering of rivers with comments on factors controlling meandering and suggestions for future actions.” Central Board of Irrigation Annual Report (Technical), 1939–1940 Session, Edgecombe A. R. B., ed., Publication 24, Chanakyapuri, New Delhi, India, 100–114.
Inglis, C. C. (1947). “Meanders and their bearing on river training.” Paper No. 7, Institution of Civil Engineers, Maritime and Waterways Engineering Division, London.
Inglis, C. C. (1949). “The behavior and control of rivers and canals.” Research Publication 13, Central Water Power, Irrigation and Navigation Research Station, Poona, India.
Keller, E. A. (1971). “Areal sorting of bed material: The hypothesis of velocity reversal.” Geological Society of America Bulletin, 83, 915–918.
Keller, E. A., and Melhorn, W. (1973). “Bedforms and fluvial processes in alluvial stream channels: Selected observations.” Fluvial Geomorphology, Morisawa M., ed., Publications in Geomorphology, SUNY Binghampton, 253–283.
Kellerhals, R. (1967). “Stable channels with gravel-paved beds.” J. Waterways Div., Proc., ASCE, 93(1), 63–84.
Kennedy, R. G. (1895). “The prevention of silting in irrigation canals.” Proc., Institution of Civil Engineers, 119, 281–290.
Knighton, A. D. (1998). Fluvial Forms and Processes: A New Perspective. Arnold, London.
Knighton, A. D., and Nanson, G. C. (1993). “Anastomosis and the continuum of channel pattern.” Earth Surface Processes and Landforms, 18, 613–625.
Lacey, G. (1958). “Flow in alluvial channels with mobile sandy beds.” Proc., Institution of Civil Engineers, 9, 145–164.
Lane, E. W. (1955). “The importance of fluvial morphology in hydraulic engineering.” Proc., ASCE, 81(745), 1–17.
Leeder, M. R., and Bridges, P. H. (1975). “Flow separation in meander bends.” Nature, 253, 338–339.
Leopold, L. B. (1994). A View of the River. Harvard University Press, Cambridge, Mass.
Leopold, L. B., and Maddock, T., Jr. (1953). “The hydraulic geometry of stream channels and some physiographic implications.” Professional Paper 242, U.S. Geological Survey, Washington, DC.
Leopold, L. B., and Wolman, M. G. (1957). “River channel patterns: Braided, meandering and straight.” Professional Paper 282-B, U.S. Geological Survey, Washington, DC.
Leopold, L. B., Wolman, M. G., and Miller, J. P. (1964). Fluvial Processes in Geomorphology. Freeman, New York, San Francisco.
Lisle, T. E. (1979). “A sorting mechanism for a riffle-pool sequence.” Geological Society of America Bulletin, 90, 1142–1157.
Lyons, J. K., Pucherelli, M. J., and Clark, R. C. (1992). “Sediment transport and channel characteristics of a sand-bed portion of the Green River below Flaming Gorge Dam, Utah, USA.” Regulated Rivers: Research and Management, 7, 219–232.
Mackin, J. H. (1948). “Concept of the graded river.” Geological Society of America Bulletin, 59, 463–512.
Nanson, G. C., and Hickin, E. J. (1986). “A statistical analysis of bank erosion and channel migration in western Canada.” Geological Society of America Bulletin, 97(4), 497–504.
Nanson, G. C., and Knighton, A. D. (1996). “Anabranching rivers: Their cause, character and classification.” Earth Surface Processes and Landforms, 21, 217–239.
Neill, C. R., and Galay, V. J. (1967). “Systematic evaluation of river regime.” ASCE, J. Waterways and Harbors Division, 93(WW1), 25–51.
Nixon, M. (1959). “A study of bank-full discharges of rivers in England and Wales.” Proc., Institution of Civil Engineers, 12, 157–175.
Nolan, K. M., Lisle, T. E., and Kelsey, H. M. (1987). “Bank-full discharge and sediment transport in northwestern California.” Proc., Corvallis Symposium, Erosion and Sedimentation in the Pacific Rim, IAHS Publication 165, IAHS, Washington, DC.
Parker, G. (1982). “Discussion of Chapter 19: Regime equations for gravel-bed rivers.” Gravel-bed Rivers: Fluvial Processes, Engineering and Management, Hey R. D., Bathurst J. C., and Thorne C. R., eds., Wiley, Chichester, UK, 542–552.
Petit, F. (1987). “The relationship between shear stress and the shaping of the bed of a pebble-loaded river, La Rulles, Ardennes.” Catena, 14 (5), 453–468.
Pickup, G., and Warner, R. F. (1976). “Effects of hydrologic regime on the magnitude and frequency of dominant discharge.” J. Hydrology, 29, 51–75.
Richards, K. S. (1982). Rivers: Form and Process in Alluvial Channels. Methuen, London.
Richards, K. S., and Lane, S. N. (1997). “Prediction of morphological changes in unstable channels.” Applied Fluvial Geomorphology for River Engineering and Management, Thorne C. R., Hey R. D., and Newsom M. D., eds., Wiley, Chichester, UK, 269–292.
Richardson, E. V., and Huber, F. W. (1991). “Evaluation of bridge vulnerability to hydraulic forces, stream instability and scour.” Report No. 1290, Vol. 1, U.S. Transportation Research Board, Washington DC, 25–38.
Riley, S. J. (1976). “Aspects of bank-full geometry in a distributary system of eastern Australia.” Hydrological Sciences J., 21, 545–560.
Rinaldi, M., and Johnson, P. A. (1997). “Characterization of stream meanders for stream restoration.” J. Hydraulic Engineering, ASCE, 123(6), 567–570.
Robinson, B. A., and Thompson, R. E. (1993). “An efficient method for assessing channel instability near bridges.” Hydraulic Engineering ‘93, Shen H. W., Su S. T., and Wen F., eds., ASCE, New York, 513–518.
Rosgen, D. L. (1994). “A classification of natural rivers.” Catena, 22, 169–199.
Rosgen, D. L. (1996). Applied River Morphology. Wildland Hydrology, Pagosa Springs, Colo. (8 sections plus bibliography).
Rundquist, L. A. (1975). “A classification and analysis of natural rivers.” Ph.D. dissertation, Department of Civil Engineering, Colorado State University, Fort Collins, Colo.
Schall, J. D., and Lagasse, P. F. (1991). “Stepwise procedure for evaluating stream stability.” Report No. 1290, Vol. 2, U.S. Transportation Research Board, Washington, DC, 254–267.
Schick, A. P. (1974). “Formation and obliteration of desert stream terraces A conceptual analysis.” Zeitschrift für Geomorphologie, Supplement, 21, 88–105.
Schumm, S. A. (1960). “The shape of alluvial channels in relation to sediment type.” Professional Paper No. 352B, U.S. Geological Survey, Washington, DC.
Schumm, S. A. (1973). “Geomorphic thresholds and the complex response of drainage systems.” Fluvial Geomorphology, Morisawa M., ed., Publications in Geomorphology, State University of New York, Binghamton, N.Y., 299–310.
Schumm, S. A. (1976). “Episodic erosion, a modification of the Davis cycle.” Theories of Landform Development, Mel-horn W. N., and Flemal R. C., R. C. eds., Publications in Geomorphology, State University of New York, Binghamton, N.Y. 69–85.
Schumm, S. A. (1977). The Fluvial System, Wiley, New York.
Schumm, S. A. (1981). “Evolution and response of the fluvial system, sedimentologic implications.” Special Publ. No. 31, Society of Economic Paleontologists and Mineralogists, Tulsa, Okla., 19–29.
Schumm, S. A. (1985). “Patterns of alluvial rivers.” Annual Review of Earth and Planetary Sciences, 13, 5–27.
Schumm, S. A., Harvey, M. D., and Watson, C. C. (1984). Incised Channels: Morphology, Dynamics and Control. Water Resources Publications, Littleton, Colo.
Schumm, S. A., and Lichty, R. W. (1965). “Time, space and causality in geomorphology.” Am. J. Sci., 263, 110–119.
Schumm, S. A., and Parker, R. S. (1973). “Implications of complex response of drainage systems for Quaternary alluvial stratigraphy.” Nat. Phys. Sci., 243, 99–100.
Sear, D. A. (1996). “Sediment transport processes in pool-riffle sequences.” Earth Surface Processes and Landforms, 12, 241–262.
Shirole, A. M., and Holt, R. C. (1991). “Planning for a comprehensive bridge safety assurance program.” Report No. 1290, Vol. 1, U.S. Transportation Research Board, Washington, DC, 39–50.
Simon, A., and Hupp, C. R. (1987). “Channel evolution in modified alluvial streams.” U.S. Geological Survey, Washington, DC.
Simons, D. B., and Albertson, M. L. (1963). “Uniform water conveyance channels in alluvial material.” Trans Am. Soc. Civil Eng., ASCE, 128(1), 65–167.
Simons, D. B., Li, R.-M., and Associates (1982). Engineering Analysis of Fluvial Systems. Simons, Li and Associates, Fort Collins, Colo.
Soar, P. J. (2000). “Channel restoration design for meandering rivers.” Ph.D. thesis, University of Nottingham, Nottingham, UK.
Soar, P. J., and Thorne, C. R. (2001). “Channel restoration design for meandering rivers.” Report ERDC/CHL CR-01-1, Coastal and Hydraulics Laboratory, Engineer Research and Development Center, U.S. Army Corps of Engineers, Vicksburg, Miss.
Stevens, M. A., Simons, D. B., and Richardson, E. V. (1975). “Nonequilibrium river form.” J. Hydraulics Division, ASCE, 101(HY5), 557–567.
Thorne, C. R. (1991). “Bank erosion and meander migration of the Red and Mississippi Rivers, USA.” Hydrology for the Water Management of Large River Basins, Proc., Vienna Symposium, IAHS Publ. No. 201, IAHS, Wallingford, UK, 301–313.
Thorne, C. R. (1998). Stream Reconnaissance Handbook. Wiley, Chichester, UK.
Thorne, C. R. (2002). “Geomorphic analysis of large alluvial rivers.” Geomorphology, 44, 3–4, 203–220.
Thorne, C. R., Hey, R. D., and Newson, M. D. (1997). Applied Fluvial Geomorphology for River Engineering and Management. Wiley, Chichester, UK.
Thorne, C. R., and Osman, A. M. (1988). “Riverbank stability analysis. II: Applications.” J. Hydraulic Engineering, ASCE, 114, 2, 151–172.
Twain, M. (1944). Life on the Mississippi. The Heritage Press, New York.
U.S. Army Corps of Engineers (USACE). (1994). “Channel stability assessment for flood control projects.” Report EM1110-2-1418, USACE, Washington, DC, <http://www.usace.army.mil/inet/usace-docs/eng-manuals/em1110-2-1418/>.
Watson, C. C., Biedenharn, D. S., and Bledsoe, B. P. (2002). “Use of incised channel evolution models in understanding rehabilitation alternatives.” J. American Water Resources Association, 38(1), 151–160.
Watson, C. C., Harvey, M. D., Biedenharn, D. S., and Combs, P. G. (1988). “Geotechnical and hydraulic stability numbers for channel rehabilitation. I: The approach.” Proc.,ASCE Hyd. Div. 1988 National Conf., Abt S. R. and Gessler J., eds., 120–125.
Watson, C. C., Raphelt, N. K., and Biedenharn, D. S. (1997). “Historical background of erosion problems in the Yazoo Basin.” Proc. of the Conf. on Management of Landscapes Disturbed by Channel Incision, Wang S. S. Y., Langendoen E. J., and Shields F. D., Jr., F. D. eds., The University of Mississippi, University, Miss., 115–119.
Webb, B. W., and Walling, D. E. (1982). “The magnitude and frequency characteristics of fluvial transport in the Devon drainage basin and some geomorphological implications.” Catena, 9, 9–23.
Williams, G. P. (1978). “Bank-full discharge of rivers.” Water Resources Res., 14, 1141–1154.
Williams, G. P. (1986). “River meanders and channel size.” J. Hydrology, 88, 147–164.
Wolman, M. G. (1955). “The natural channel of Brandywine Creek, Pennsylvania.” Professional Paper No. 271, U.S. Geological Survey, Washington, DC.
Wolman, M. G., and Leopold, L. B. (1957). “River flood plains: Some observations on their formation.” Professional Paper 282C, U.S. Geological Survey, Washington, DC, 87–107.
Wolman, M. G., and Miller, J. P. (1960). “Magnitude and frequency of forces in geomorphic processes.” J. Geol., 68, 54–74.
Woodyer, K. D. (1968). “Bank-full frequency in rivers.” J. Hydrology, 6, 114–142.
Yalin, M. S. (1971). “On the formation of dunes and meanders: Hydraulic research and its impact on the environment.” Proc., 14th Congress of the International Association for Hydraulic Research, Société Hydrotechnique de France, Paris, 3, C 13, 101–108.
Yevjevich, V. (1972). “Structural analysis of hydrologic time series.” Hydrology Paper 56, Colorado State University, Fort Collins, Colo.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 355 - 386
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.