Chapter 5
Sediment Transport Measurements
Publication: Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Get full access to this article
View all available purchase options and get full access to this chapter.
REFERENCES
Adams, J. (1979). “Gravel Size Analysis from Photographs.” J. Hydr. Div., ASCE, 105(10), 1247–1255.
Agrawal, Y. C., and Pottsmith, H. C. (2001). “Laser sensors for monitoring sediments: Capabilities and limitations, a survey.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-144–III-151.
ASTM International (1997). Terminology for fluvial sediment: Active standard D4410-98, ASTM International West Consho hocken, Pa.
Bent, G. C., Gray, J. R., Smith, K. P., and Glysson, G. D. (2001). “A synopsis of technical issues for monitoring sediment in highway and urban runoff.” U.S. Geological Survey Open-File Report 00-497, U.S. Geological Survey, Reston, Va.; also <http://ma.water.usgs.gov/FHWA/NDAMSP1.html>.
Bluck, B. J. (1982). “Texture of gravel bars in braided streams.” Gravel bed rivers. Fluvial processes, engineering and management, Hey R.D., Bathurst J.C., and Thorne C.R., eds., Wiley, London, 339–355.
Bray, D. I. (1972). “Generalized regime-type analysis of Alberta rivers.” PhD thesis, Department of Civil Engineering, University of Alberta, Edmonton, Alta., Canada.
Bunte, K., and Abt, S. R. (2001). “Sampling surface and subsurface particle-size distributions in wadable gravel- and cobble-bed streams for analyses in sediment transport, hydraulics, and streambed monitoring.” General Technical Report RMRS-GTR-74, USDA Forest Service, Fort Collins, Colo.
Bunte, K. I., Abt, S. R., Potyondy, J. P. (2001). “Portable bedload traps with high sampling intensity for representative sampling of gravel transport in wadable mountain streams.” Proceedings of the Seventh Federal Interagency Sedimentation Conference, Reno, Nev., III-24–III-31.
Burdick, R. K., and Graybill, F. A. (1992). Confidence intervals on variance components, Marcel Dekker, New York.
Byrne, M. J., and Patiño, E. (2001). “Feasibility of using acoustic and optical backscatter instruments for estimating total suspended solids concentration in estuarine environments.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-135–III-138.
Capel, P. D., and Larsen, S. J. (1996). “Evaluation of selected information on splitting devices for water samples.” U.S. Geological Survey Water-Resources Investigations Report 95-4141, U.S. Geological Survey, Reston, Va.
Capel, P. D., and Nacionales, F. (1995). “Precision of a splitting device for water samples.” U.S. Geological Survey Open-File Report 95-293, U.S. Geological Survey, Reston, Va.
Carey, W. P. (1985). “Variability in measured bedload-transport rates.” Water Resources Bulletin, 21(1), 39–48.
Carey, W. P., and Hubbell, D. W. (1986). “Probability distributions for bedload transport.” Proceedings of the 4th Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Interagency Advisory Committee on Water Data, Las Vegas, Nev., 4-131–4-140.
Carling, P. A., Williams, J. J., Glaister, M. G., and Orr, H. G. (1993). “Particle dynamics and gravel-bed adjustments.” Final Technical Report DAJA45-90-C-0006, European Research Office of the Army, London.
Childers, D. (1991). “Sampling differences between the Helley-Smith and BL-84 bedload samplers.” Fifth Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Interagency Advisory Committee on Water Data, Las Vegas, Nev., 6-31–6-38.
Childers, D. (1992). “Field comparisons of six pressure-difference bedload samplers in high-energy flow.” Report 92-4068, U.S. Geological Survey Water Resources Investigations, Reston, Va.
Childers, D., Hanjin, G., and Gangyan, Z. (1989). “Field comparisons of bedload samplers from the United States of America and People’s Republic of China.” Fourth International Symposium on River Sedimentation, Science Press, Beijing, China, 1309–1316.
Childers, D., Kresch, D. L., Gustafson, S. A., Randle, T. J., Melena, J. T., Cluer, B. (2000). “Hydrologic data collected during the 1994 Lake Mills drawdown experiment, Elwha River, Washington.” Water Resources Investigation Report 99-4215, U.S. Geological Survey, Reston, Va.
Christiansen, V. G., Ziegler, A. C., and Xiaodong, J. (2001). “Continuous turbidity monitoring and regression analysis to estimate total suspended solids and fecal coliform bacteria loads in real time.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-94–III-101.
Church, M., and Kellerhals, R. (1978). “On the statistics of grain size variation along a gravel river.” Can. J. Earth Sci., 15, 1151–1160.
Church, M. A., McLean, D. G., and Wolcott, J. F. (1987). “River bed gravels: Sampling and analysis.” Sediment transport in gravel bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, London, 43–88.
Church, M., Wolcott, J. F., and Fletcher, W. K. (1991). “A test of equal mobility in fluvial sediment transport: behavior of the sand fraction.” Water Resources Research, 27(11), 2941–2951.
Colby, B. R. (1963). “Fluvial sediments A summary of source, transportation, deposition, and measurement of sediment transport.” U.S. Geological Survey Bulletin 1181-A, U.S. Geological Survey, Reston, Va. <http://pubs.er.usgs.gov/usgspubs/b/b1181A>
Crowder, D. W., and Diplas, P. (1997). “Sampling heterogeneous deposits in gravel-bed streams.” J. Hydr. Eng., ASCE, 123(12), 1106–1117.
Davis, B. E. (2000). “The US D-96: An isokinetic suspended- sediment/water-quality collapsible bag sampler.” Federal Interagency Sedimentation Project Report PP, Federal Interagency Sedimentation Project, Vicksburg, Miss., USACE Engineer, and Research Development Center; also <http://fisp.wes.army.mil/>.
Davis, B. E. (2005). A guide to the proper selection and use of federally approved sediment and water-quality samplers. U.S. Geological Survey Open-File Report 2005-1087, U.S. Geological Survey, Reston, Va. (also published as Federal Interagency Sedimentation Project Report QQ), <http://fisp.wes.army.mil/Report%20QQ-Users%20Guide.pdf>(Aug. 12, 2005).
Day, T. J. (1991). “Sediment monitoring in Canada.” Proceedings of the Fifth Federal Interagency Conference, Subcommittee on Sedimentation of the Interagency Advisory Committee on Water Data, Las Vegas, Nev., Vol. I, pp. 1-24–1-29.
Delesse, A. (1848). “Pour determiner la composition des roches.” Ann. Des Mines, 13, fourth series, 379.
De Vries, M. (1970). “On accuracy of bed-material sampling.” J. of Hydr. Research, 8(4), 523–533.
De Vries, M. (1973). “On measuring discharge and sediment transport in rivers.” Publication No. 106, Delft Hydraulics Laboratory, Delft, the Netherlands.
Dinehart, R. L. (1989). “Dune migration in a steep coarse-bedded stream.” Water Resources Research, 25(5), 911–923.
Dinehart, R. L. (2001). “Bedform mapping in the Sacramento River.” Proceedings of the Seventh Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Reno, Nev., III-55–III-62.
Diplas, P. (1992). “Discussion of ‘Experimental investigation of the effect of mixture properties on transport dynamics.’” Dynamics of gravel bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, Chichester, U.K., 131–135.
Diplas, P. (1994). “Modeling of fine and coarse sediment interaction over alternate bars.” J. of Hydrol., 159, 335–351.
Diplas, P., and Crowder, D. (1997). Discussion of “Statistical approach to bed-material surface sampling.” J. Hydr. Eng., ASCE, 123(9), 823–824.
Diplas, P., and Fripp, J. B. (1992). “Properties of various sediment sampling procedures.” J. Hydr. Eng. ASCE, 118(7), 955–970.
Diplas, P., and Parker, G. (1992). “Deposition and removal of fines in gravel-bed streams.” Dynamics of gravel-bed rivers, Billi P., Hey R.D., Thorne C.R., and Tacconi P., eds., Wiley, Chichester, U.K., 313–329.
Diplas, P., and Sutherland, A. J. (1988). “Sampling techniques of gravel sized sediments.” J. Hydr. Eng., ASCE, 114(5), 484–501.
Dixon, M., and Ryan, S. (2001). “Using an underwater video camera for observing bed load transport in mountain streams.” Proceedings of the Seventh Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Reno, Nev., P-70–P-73.
Drake, T. G., Dietrich, W. E., Whiting, P. J., Leopold, L. B., and Shreve, R. L. (1988). “Bed load transport of fine gravel observed by motion-picture photography.” Journal of Fluid Mechanics, 192, 193–217.
Druffel, L., Emmett, W. W., Schneider, V. R., and Skinner, J. V. (1976). “Laboratory hydraulic calibration of the Helley-Smith bedload sediment sampler.” Open File Report, 76–752, U.S. Geological Survey, Reston, Va.
Duizendstra, H. D. (1999). “Measuring, observing and pattern recognition of sediment transport in an armoured river.” Physics and Chemistry of the Earth, in press.
Durand, D. (1971). Stable chaos, an introduction to statistical control, General Learning Press, Morristown, N.J.
Edwards, T. K., and Glysson, G. D. (1999). “Field methods for measurement of fluvial sediment.” Techniques of water-resources investigations of the U.S. Geological Survey, Book 3, Applications of Hydraulics, C2, U.S. Geological Survey, Washington, D.C.
Efron, B., and Tibshirani, R. (1991). “Statistical data analysis in the computer age.” Science, 253, 390–395.
Ehrenberger, R. (1932). “Geschiebemessungen an flüssen mit-tels auffanggeräten und modellversuche mit letzteren [Detritus measurements in rivers by means of gripping instruments and model experiments with the latter].” Die Wasserwirtschaft, Vienna, Vols. 33, 36 (in German). Translation Minnesota University.
Einstein, A. H. (1937). “Die Eichung des im Rhein verwende-ten Geschiebefängers [Calibrating the bed load trap as used in the Rhein].” Bauzeitung 110(12), Switzerland. Translation Soil Conservation Service, California Institute of Technology, Pasadena, Calif.
Einstein, A. H. (1944). “Bed-load transportation in Mountain Creek.” Technical Bulletin 55, Soil Conservation Service, U.S. Department of Agriculture, Washington, D.C.
Emerson, J. D., and Hoaglin, D. C. (1983). “Stem-and-leaf displays.” in Understanding robust and exploratory data analysis, Hoaglin D.C., Mosteller F., and Tuckey J.W., eds., Wiley, New York, 7–31.
Emmett, W. W. (1980). “A field calibration of the sediment-trapping characteristics of the Helley-Smith bedload sampler.” U.S. Geological Survey Professional Paper 1139, 44 pp, Reston, Va.
Engel, P., and Lau, Y. L. (1980). “Calibration of bed-load samplers.” Journal of the Hydraulics Division, 106(HY10), 1679–1685.
Engelund, F., and Hansen, E. (1967). A monograph on sediment transport in alluvial streams. Teknisk Vorlag, Copenhagen, Denmark.
Ethembabaogla, S. (1978). “Some characteristics of unstable flow past slots.” Journal of the Hydraulics Division, 104(HY5), 649–666.
Federal Inter-Agency River Basin Committee (FIARBC). (1940). “Equipment used for sampling bed load and bed material.” A Study of Methods Used in Measurement and Analysis of Sediment Loads in Streams, Report 2, Federal Inter-Agency River Basin Committee, University of Iowa, Iowa City.
Federal Interagency Sedimentation Project (FISP). (1940). “Field practice and equipment used in sampling suspended sediment.” Interagency Report No. 1, Iowa University Hydraulics Laboratory, Iowa City, Iowa.
Federal Interagency Sedimentation Project (FISP). (1941). “Laboratory investigation of suspended-sediment samplers.” Interagency Report No. 5, Iowa University Hydraulics Laboratory, Iowa City, Iowa.
Federal Interagency Sedimentation Project (FISP). (1952). “The design of improved types of suspended-sediment samplers.” Interagency Report No. 6, St. Anthony Falls Hydraulics Laboratory, Minneapolis, Minn.
Federal Interagency Sedimentation Project (FISP). (1961). “The single-stage sampler for suspended sediment.” Interagency Report No. 13, St. Anthony Falls Hydraulics Laboratory, Minneapolis, Minn.
Federal Interagency Sedimentation Project (FISP). (1963). “Determination of fluvial sediment discharge.” Interagency Report No. 14, St. Anthony Falls Hydraulics Laboratory, Minneapolis, Minn.
Federal Interagency Sedimentation Project (FISP). (1981). “Test and design of automatic fluvial suspended-sediment samplers.” Interagency Report W, St. Anthony Falls Hydraulics Laboratory, Minneapolis, Minn.
Federal Interagency Sedimentation Project (FISP). (2000). “Federal Interagency Sedimentation Project home page.” <http://fisp.wes.army.mil/>(June 28, 2000).
Federal Interagency Sedimentation Project (FISP). (2001). “US VTP-99 vertical transit pacer.” <http://fisp.wes.army.mil/Catalog%20Page%20US%20VTP-99.htm>(December 28, 2001).
Federal Interagency Sedimentation Project (FISP). (2002). “US SS-1 Fluoropolymer churn sample splitter.” <http://fisp.wes.army.mil/Catalog%20Page%20US%20SS-1.htm> (March 26, 2002).
Ferguson, R. I., and Paola, C. (1997). “Bias and precision of percentiles of bulk grain size distributions.” Earth Surface Processes and Landforms, 22, 1061–1077.
Folk, R. L. (1974). Petrology of sedimentary rocks, Hemphill Publishing Company, Austin, Tex.; also <http://www.lib.utexas.edu/geo/FolkReady/>.
Fripp, J. B., and Diplas, P. (1993). “Surface sampling in gravel streams.” J. Hydr. Eng. ASCE, 119(4), 473–490.
Gale, S. J., and Hoare, P. G. (1994). “Reply: Bulk sampling of coarse clastic sediments for particle size analysis.” Earth Surface Processes and Landforms, 19, 263–268.
Garcia, M. H. (1998). “Bed-image velocimetry: A technique for measuring bedload transport in large alluvial rivers.” Proceedings of the Federal Interagency Workshop, Sediment Technology for the 21st Century, U.S. Geological Survey, St. Petersburg, Fla.
Gartner, J. W., and Cheng, R. T. (2001). “The promises and pitfalls of estimating total suspended solids based on backscatter intensity from acoustic Doppler current profile.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-119–III-126.
Gaudet, J. M., Roy, A. G., and Best, J. L. (1994). “Effect of orientation and size of Helley-Smith sampler on its efficiency.” Journal of Hydraulic Engineering, 120(6), 758–766.
Gaweesh, M. T. K., and Van Rijn, L. C. (1994). “Bed-load sampling in sand-bed rivers.” Journal of Hydraulic Engineering, 120(12), 1364–1384.
Gilbert, R. O. (1987). Statistical methods for environmental pollution monitoring, Wiley, New York.
Glysson, G. D. (1989a). “100 years of sedimentation study by the USGS.” Proceedings of the International Symposium, Sediment Transport Modeling, Sam S. Wang Y., ed., ASCE, Reston, Va., 260–265.
Glysson, G. D. (1989b). “Criteria for a sediment data set.” Proceedings of the International Symposium on Sediment Transport Modeling, Hydraulics Division, ASCE, Reston, Va., pp. 1–7.
Glysson, G. D., and Gray, J. R. (1997). “Coordination and standardization of federal sedimentation activities.” Proceedings of the U.S. Geological Survey Sediment Workshop, “Expanding Sediment Research Capabilities in Today’s USGS,” Reston, Virginia, and Harpers Ferry, West Virginia, February 4–7, 1997, <http://water.usgs.gov/osw/techniques/workshop/glysson.html>.
Glysson, G. D., Gray, J. R., and Conge, L. M. (2000). “Adjustment of total suspended solids data for use in sediment studies.” Proceedings of the ASCE’s 2000 Joint Conference on Water Resources Engineering and Water Resources Planning and Management, ASCE, Reston, Va., <http://water.usgs.gov/osw/pubs/ASCEGlysson.pdf>(Aug. 16, 2005).
Glysson, G. D., Gray, J. R., and Schwarz, G. E. (2001). “A comparison of load estimates using total suspended solids and suspended-sediment concentration data.” Proceedings of the ASCE World Water & Environmental Resources Congress, ASCE, Reston, Va., <http://water.usgs.gov/osw/pubs/TSS_Orlando.pdf>(Aug. 16, 2005).
Gomez, B., and Church, M. (1989). “An assessment of bed load sediment transport formulae for gravel bed rivers.” Water Resources Research, 25(6), 1161–1186.
Gomez, B., Hubbell, D. W., and Stevens, H. H., Jr. (1990). “At-a-point bed load sampling in the presence of dunes.” Water Resources Research, 26(11), 2717–2731.
Gomez, B., and Troutman, B. M. (1997). “Evaluation of process errors in bed load sampling using a dune model.” Water Resources Research, 33(10), 2387–2398.
Goodman, L. A. (1965). “On simultaneous confidence intervals for multinomial proportions.” Technometrics, 7(2), 247–254.
Gray, J. R., and Fisk, G. G. (1992). “Monitoring radionuclide and suspended-sediment transport in the Little Colorado River basin, Arizona and New Mexico, USA.” Erosion and sediment transport monitoring programmes in river basins. IAHS Publication No. 210. International Association of Hydrological Sciences, Wallingford, U.K. 505–516.
Gray, J. R., and Schmidt, L. (1998). Sediment technology for the 21st century. U.S. Geological Survey <http://water.usgs.gov/osw/techniques/sedtech21/index.html>.
Gray, J. R., Glysson, G. D., Turcios, L. M., and Schwarz, G. E. (2000). “Comparability of total suspended solids and suspended-sediment concentration data.” U.S. Geological Survey Water-Resources Investigations Report 00-4191, U.S. Geological Survey, Reston, Va.; also <http://water.usgs.gov/osw/pubs/WRIR00-4191.pdf>.
Gray, J. R., Mellis, T. S., Patiño, E., Gooding, D. J., Topping, D. J., Larsen, M. C., and Rasmussen, P. P. (2005). “U.S. Geological Survey suspended-sediment surrogate research on optic, acoustic, and pressure-difference technologies.” Proceedings of the Federal Interagency Sediment Monitoring Instrument and Analysis Workshop, September 9–11, 2003, Flagstaff, Arizona, Gray J.R., ed., U.S. Geological Survey Circular 1272, <http://water.usgs.gov/osw/techniques/sediment/sedsurrogate-2003workshop/listofpapers.html>(Aug. 4, 2005).
Gray, J. R., Webb, R. H., and Hyndman, D. W. (1991). “Low-flow sediment transport in the Colorado River.” Fifth Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation Interagency Advisory Committee on Water Data, Las Vegas, Nev., 4-63–4-71.
Guy, H. P. (1969). “Laboratory theory and methods for sediment analysis.” U.S. Geological Survey Techniques of Water-Resources Investigations, book 3, chapter C1, U.S. Geological Survey, Reston, Va.
Guy, H. P. (1970). “Fluvial sediment concepts.” U.S. Geological Survey Techniques of Water-Resources Investigations, book 3, chapter C1, U.S. Geological Survey, Reston, Va. <http://pubs.er.usgs.gov/usgspubs/twri/twri03C1>
Hamamori, A. (1962). “A theoretical investigation on the fluctuation of bedload transport.” Delft Hydraulics Laboratory Report R4, Delft, the Netherlands.
Hassan, M. A., and Church, M. (2000). “Experiments on surface structure and partial sediment transport on a gravel bed.” Water Resour. Res., 36(7), 1885–1895.
Hayward, J. A., and Sutherland, A. J. (1974). “The Torlesse Stream vortex-tube sediment trap.” J. Hydrol., 13(1), 41–53.
Helley, E. J., and Smith, W. (1971). “Development and calibration of a pressure-difference bedload sampler.” Open File Report, U.S. Geological Survey, Reston, Va.
Hey, R. D., and Thorne, C. R. (1983). “Accuracy of surface samples from gravel bed material.” J. Hydr. Eng. ASCE, 109(6), 842–851.
Hogan, S. A., Abt, S. R., and Watson, C. C. (1993). “Development and testing of a bed material sampling method for gravel and cobble bed streams.” Civil Engineering Department Report, Colorado State University, Fort Collins, Colo.
Huanjin, Gao (1991). “The comparison tests of the gravel bed load samplers.” Fifth Federal Interagency Sedimentation Conference, Las Vegas, Nev., 6-55–6-62.
Hubbell, D. W. (1964). “Apparatus and techniques for measuring bedload.” Water-Supply Paper 1748, U.S. Geological Survey, Reston, Va.
Hubbell, D. W. (1987). “Bed load sampling and analysis.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, Chichester, U.K., 89–118.
Hubbell, D. W., et al. (1956). “Investigations of some sedimentation characteristics of a sand-bed stream.” Progress Report No. 1,U.S. Geological Survey Open-File Report, U.S. Geological Survey, Reston, Va.
Hubbell, D. W., and Stevens, H. H., Jr. (1986). “Factors affecting accuracy of bedload sampling.” Proceedings of the 4th Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Interagency Advisory Committee on Water Data, Las Vegas, Nev., 4-20–4-29.
Hubbell, D. W., Stevens, H. H., Jr., Skinner, J. V., and Beverage, J. P. (1985). “New approach to calibrating bedload samplers.” Journal of the Hydraulics Division, 111(4), 677–694.
Hubbell, D. W., Stevens, H. H., Jr., Skinner, J. V., and Beverage, J. P. (1987). “Laboratory data on coarse-sediment transport for bedload-sampler calibrations.” Water-Supply Paper 2299, U.S. Geological Survey, Reston, Va.
Ibbeken, K., and Schleyer, R. (1986). “Photo sieving: A method for grain-size analysis of coarse-grained, unconsolidated bedding surfaces.” Earth Surface Processes and Landforms, 11, 59–77.
International Standards Organization (ISO). (1992). “Liquid flow measurement in open channels Sampling and analysis of gravel-bed material.” 9195:1992(E), International Standards Organization, Geneva.
International Standards Organization (ISO). (1993). “Measurement of liquid flow in open channels methods for measurement of suspended sediment.” ISO 4363, 2nd Ed., International Standards Organization, Geneva.
Iseya, F., and Ikeda, H. (1987). “Pulsations in bedload transport rates induced by a longitudinal sediment sorting: a flume study using sand and gravel mixtures.” Geografiska Annaler, 69A, 15–27.
Johnson, G. P. (1997). “Instruction manual for U.S. Geological Survey sediment observers.” U.S. Geological Survey Open-File Report 96-431, U.S. Geological Survey, Reston, Va.
Kellerhals, R., and Bray, D. I. (1971). “Sampling procedures for coarse fluvial sediments.” J. Hydr. Eng. Div. ASCE, 103(HYB), 1165–1180.
Kleinhans, M. G., and Ten Brinke, W. B. M. (2001). “Accuracy of cross-channel sampled sediment transport in large sand-gravel-bed rivers.” Journal of Hydraulic Engineering, 127(4), 258–269.
Knott, J. M., Glysson, G. D., Malo, B. A., and Schroder, L. J. (1993). “Quality assurance plan for the collection and processing of sediment data by the U.S. Geological Survey, Water Resources Division.” U.S. Geological Survey Open-File Report 92-499, U.S. Geological Survey, Reston, Va.
Knott, J. M., Sholar, C. J., and Matthes, W. J. (1992). “Quality assurance guidelines for the analysis of sediment concentration by U.S. Geological Survey sediment laboratories.” U.S. Geological Survey Open-File Report 92-33, U.S. Geological Survey, Reston, Va.
Koltun, G. F., Gray, J. R., and McElhone, T. J. (1994). “User’s manual for SEDCALC, a computer program for computation of suspended-sediment discharge.” U.S. Geological Survey Open-File Report 94-459, U.S. Geological Survey, Reston, Va.
Kondolf, G. M. (1997). “Application of the pebble count: Notes on purpose, method, and variants.” Water Resources Bulletin, 33(1), 79–87.
Kondolf, G. M., and Wolman, M. G. (1993). “The sizes of salmonid spawning gravels.” Water Resour. Res., 29(7), 2275–2285.
Kuhnle, R. A. (1992). “Bed load transport during rising and falling stages on two small streams.” Earth Surface Processes and Landforms, 17, 191–197.
Kuhnle, R. A. (1996). “Unsteady transport of sand and gravel mixtures.” Advances in fluvial dynamics and stratigraphy, Carling P.A., Dawson M.R., eds., Wiley, Chichester, U.K., 183–201.
Kuhnle, R. A., and Derrow, R. W., II (1994). “Using the SedBed monitor to measure bed load.” Proceedings of the Symposium, Fundamentals and Advancements in Hydraulic Measurements and Experimentation, Pugh C.A., ed., ASCE, Reston, Va., pp. 129–139.
Kuhnle, R. A., and Southard, J. B. (1988). “Bed load transport fluctuations in a gravel bed laboratory channel.” Water Resources Research, 24(2), 247–260.
Kuhnle, R. A., Willis, J. C., Bowie, A. J. (1989). “Variations in the transport of bed load sediment in a gravel-bed stream, Goodwin Creek, northern Mississippi, U.S.A.” Proceedings of the Fourth International Symposium on River Sedimentation, Science Press, Beijing, China, 539–546.
Land, J. M., and Jones P. D. (2001). “Acoustic measurement of sediment flux in rivers and near-shore waters.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-127–III-134.
Lane, S. L., Flanagan, S., and Wilde, F. D. (2003). “Selection of equipment for water sampling (ver. 2.0).” U.S. Geological Survey Techniques of Water-Resources Investigations, vol. 9, chap. A2, Reston, Va., <http://pubs.water.usgs.gov/twri9A2/> (Aug. 12, 2005).
Laronne, J. B., Reid, I., Yitshak, Y., and Frostick, L. E. (1992). “Recording bedload discharge in a semiarid channel, Nahal Yatir, Israel.” Proceedings of Erosion and Sediment Transport Monitoring Programmes in River Basins, Publication No. 210, IAHS, Oslo, Norway, 79–86.
Larsen, M. C., Alamo, C. F., Gray, J. R., and Fletcher, W. (2001). “Continuous automated sensing of streamflow density as a surrogate for suspended-sediment concentration sampling.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-102–III-109.
Lee, T. L. (1990). The use of multispectral video remote sensing to monitor suspended sediment concentrations. University of Arizona PhD dissertation, Tucson, Arizona, 167 p.
Leopold, L. B., and Emmett, W. W. (1976). “Bedload measurements, East Fork River, Wyoming.” Proceedings National Academy of Sciences, 73, 1000–1004.
Lewis, J. (1991). “An improved bedload sampler.” Proceedings of the 5th Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Interagency Advisory Committee on Water Data, Las Vegas, Nev., 6-1–6-8.
Lewis, J. (1996). “Turbidity-controlled suspended sediment sampling for runoff-event load estimation.” Water Resources Research, 32(7), 2299–2310.
Lodhi, M. A., Rundquist, D. C., Han, L., and Kuzila, M. S. (1997). “The potential for remote sensing of loess soils suspended in surface waters.” Journal of the American Water Resources Association 33(1): 111–117.
Marcus, W. A., Ladd, S., and Stoughton, J. (1995). “Pebble counts and the role of user-dependent bias in documenting sediment size distributions.” Water Resour. Res., 31(10), 2625–2631.
Matthes, W. J., Sholar, C. J., and George, J. R. (1991). “Quality assurance plan for analysis of fluvial sediment by laboratories of the U.S. Geological Survey.” U.S. Geological Survey Open-File Report 91-469, U.S. Geological Survey, Reston, Va.
May, W. L., and Johnson, W. D. (1997). “Properties of simultaneous confidence intervals for multinomial proportions.” Commun. Stat. Simul. Comput., 26(2), 495–518.
McEwan, I. K., Sheen, T. M., Cunningham, G. J., and Allen, A. R. (2000). “Estimating the size composition of sediment surfaces through image analysis.” Proc. of the Institution of Civil Engineers Water Maritime and Energy, 142(4), 189–195.
McGregor, J. (2000a). “Development of the US D-95 Suspended-Sediment Sampler.” Report LL, Federal Interagency Sedimentation Project, Vicksburg, Miss.; also <http://fisp.wes.army.mil/>.
McGregor, J. (2000b). “Development of the US DH-95 Suspended-Sediment Sampler.” Report MM, Federal Interagency Sedimentation Project, Vicksburg, Miss.; also <http://fisp.wes.army.mil/>.
McKallip, T. E., Koltun, G. F., Gray, J. R., and Glysson, G. D. (2001). “GCLAS A graphical constituent loading analysis system.” Proceedings of the 7th Federal Interagency Sedimentation Conference, Vol. II, VI-49–VI-52, U.S. Geological Survey, Reston, Va.
Mertes, L. A. K., Smith, M. O., and Adams, J. B. (1993). “Estimating suspended sediment concentrations in surface waters of the Amazon River wetlands from Landsat Images.” Remote Sensing of Environment 43: 281–301.
Milhous, R. T. (1973). “Sediment transport in a gravel-bottomed stream.” PhD thesis, Oregon State University.
Moody, J. A., and Meade, R. H. (1994). “Evaluation of the method of collecting suspended sediment from large rivers by discharge- weighted pumping and separation by continuous-flow centrifugation.” Hydrological Processes, 8, 513–530.
Morris, G. L., and Fan, J. (1997). Reservoir sedimentation handbook. McGraw-Hill, New York.
Mosley, M. P., and Tindale, D. S. (1985). “Sediment variability and bed material sampling in gravel-bed rivers.” Earth Surface Processes, 10(5), 465–482.
Murphy, P. J., and Amin, M. I. (1979). “Compartmented sediment trap.” Journal of the Hydraulics Division, 105(HY5), 489–500.
Nelson, M. E., and Benedict, P. C. (1950). “Measurement and analysis of suspended sediment loads in streams.” American Society of Civil Engineers, Transactions, Paper No. 2450, 891–918.
Nordin, C. F., Cranston, C. C., and Mejia-B, A. (1983). “New technology for measuring water and suspended-sediment discharge of large rivers.” Proceedings of the Second International Symposium on River Sedimentation, Water Resources and Electric Power Press, Beijing, 1145–1158.
O’Leary, S. J., and Beschta, R. L. (1981). “Bed load transport in an Oregon Coast Range stream.” Water Resources Bulletin, 17(5), 886–894.
Osterkamp, W. R., and Emmett, W. W. (1992). “The Vigil network.” Erosion and Sediment Transport Monitoring Programmes in River Basins: Proceedings of the Oslo Symposium, Publication No. 210, International Association of Hydrological Sciences, Oslo, Norway, 397–404.
Osterkamp, W. R., Heilman, P. N., Gray, J. R., et al. (2004). “An invitation to participate in a North American sediment-monitoring network.” American Geophysical Union, EOS, 84(40), 386–389.
Osterkamp, W. R., Heilman, P. N., and Lane, J. (1998). “Economic considerations of a continental sediment-monitoring program.” International Journal of Sediment Research, 13(4), 12–24.
Osterkamp, W. R., and Parker, R. S. (1991). “Sediment monitoring in the United States.” Proceedings of the Fifth Federal Interagency Conference, Subcommittee on Sedimentation of the Interagency Advisory Committee on Water Data, Las Vegas, Nev., I, 1-15–1-23.
Ott, L. (1988). An introduction to statistical methods and data analysis, 3rd Ed., PWS-Kent Publishing Co., Boston, Mass.
Parker, G. (1991). “Selective sorting and abrasion of river gravel. I: Theory.” J. Hydr. Engrg., ASCE, 117(2), 131–149.
Petrie, J., and Diplas, P. (2000). “Statistical approach to sediment sampling accuracy.” Water Resour. Res., 36(2), 597–605.
Pitlick, J. (1988). “Variability of bed load measurement.” Water Resources Research, 24(1), 173–177.
Poreh, M., Sagiv, A., and Seginer, I. (1970). “Sediment sampling efficiency of slots.” Journal of the Hydraulics Division, 96(HY10), 2065–2078.
Porterfield, G. (1972). “Computation of fluvial-sediment discharge.” Techniques of Water Resources Investigations, U.S. Geological Survey, Reston, Va., Book 3, C3.
Powell, D. M., Reid, I., Laronne, J. B., and Frostick, L. E. (1998). “Cross-stream variability of bedload flux in narrow and wide ephemeral channels during desert flash floods.” Gravel-Bed Rivers in the Environment, Klingeman P.C., Beschta R.L., Komar P.D., and Bradley J.B., eds., Water Resources Publications, Highlands Ranch, Colo., 177–196.
Rantz, S. E. (1982). “Measurement and computation of streamflow.” Water-Supply Paper 2175, U.S. Geological Survey, Reston, Va., Vols. 1 and 2, <http://water.usgs.gov/pubs/wsp/wsp2175>(Aug. 16, 2005).
Reid, I., Brayshaw, A. C., and Frostick, L. E. (1984). “An electromagnetic device for automatic detection of bedload motion and its field applications.” Sedimentology, 31, 269–276.
Reid, I., Layman, J. T., Frostick, L. E. (1980). “The continuous measurement of bedload discharge.” Journal of Hydraulic Research, 18, 243–249.
Rice, S., and Church, M. (1996). “Sampling surficial fluvial gravels: The precision of size distribution percentile estimates.” J. Sedimentary Research, 66(3), 654–665.
Rice, S., and Church, M. (1998). “Grain size along two gravel-bed rivers: Statistical variation, spatial pattern and sedimentary links,” Earth Surface Processes and Landforms, 23, 345–363.
Ritter, J. R., and Helley, E. J. (1969). “An optical method for determining particle sizes of coarse sediment.” Techniques of Water-Resources Investigations, Book 5, U.S. Geological Survey, Washington, D.C.
Robinson, A. R. (1962). “Vortex tube sand trap.” ASCE Transactions, 127(III), 391–424.
Rubin, D. M., Tate, G. B., Topping, D. J., Anima, R. A. (2001). “Use of rotating side-scan sonar to measure bedload.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-139–III-143.
Russ, J. C., and Dehoff, R. T. (2000). Practical stereology, 2nd Ed., Kluwer Academic/Plenum, New York, 381.
Ryan, S. E., and Porth, L. S. (1999). “A field comparison of three pressure-difference bedload samplers.” Geomorphology 30: 307–322.
Schoellhamer, D. H. (2001). “Continuous monitoring of suspended sediment in rivers by use of optical sensors.” Proceedings of the 7th Federal Interagency Sedimentation Conference, March 25–29, 2001, Reno, Nevada, Vol. I, pp. III-160–III-167.
Sear, D. A. (1996). “Sediment transport processes in pool-riffle sequences.” Earth Surface Processes and Landforms, 21, 241–262.
Simons, D. B., Richardson, E. V., and Nordin, C. F., Jr. (1965). “Bedload equation for ripples and dunes.” Professional Paper 462-H, U. S. Geological Survey, Reston, Va.
Skinner, J. V. (1989). “History of the Federal Interagency Sedimentation Project.” Proceedings of the International Symposium, Sediment Transport Modeling, Wang S.S.Y., ed., ASCE, Reston, Va., 266–271.
Sprent, P. (1998). Data driven statistical methods, Chapman & Hall, London, U.K.
Stevens, H. H., Jr., Lutz, G. A., and Hubbell, D. W. (1980). “Collapsible-bag suspended-sediment sampler.” Am. Soc. Civ. Engin. Proc., 106(HY4), 11–16.
Tacconi, P., and Billi, P. (1987). “Bed load transport measurements by the vortex-tube trap on Virginio Creek, Italy.” Sediment transport in gravel-bed rivers, Thorne C.R., Bathurst J.C., and Hey R.D., eds., Wiley, Chichester, U.K., 583–616.
Tate, G., and Rubin, D. (1998). “Interferometric rotary scanning sonar for bed load transport investigations.” Proceedings of the Federal Interagency Workshop, Sediment Technology for the 21st Century, U.S. Geological Survey, St. Petersburg, Fla., <http://water.usgs.gov/osw/techniques/sedtech21/index.html>(Aug. 15, 2005).
Thomas, R. B. (1985). “Estimating total suspended sediment yield with probability sampling.” Water Resources Research, 21(9), 1381–1388.
Thomas, R. B. (1991). “Systematic sampling for suspended sediment.” Proceedings of the Fifth Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation of the Interagency Advisory Committee on Water Data, Las Vegas, Nev., 1, 2-17–2-24.
Thomas, R. B., and Lewis, J. (1993a). “A comparison of selection at list time and time stratified sampling for estimating suspended sediment loads.” Water Resources Research, 29(4), 1247–1256.
Thomas, R. B., and Lewis, J. (1993b). “A new model for bed load sampler calibration to replace the probability-matching method.” Water Resources Research, 29(3), 583–597.
Thompson, K. R. (1982). “Characteristics of suspended sediment in the San Juan River near Bluff, Utah.” Water-Resources Investigations Report 82-4104, U.S. Geological Survey, Reston, Va.
Thompson, K. R. (1984). “Annual suspended-sediment loads in the Colorado River at Green River, Utah, 1930–82.” Water-Resources Investigations Report 84-4169, U.S. Geological Survey, Reston, Va.
Thompson, K. R. (1985). “Annual suspended-sediment loads in the Colorado River near Cisco, Utah, 1930–82.” Water-Resources Investigations Report 85-4011, U.S. Geological Survey, Reston, Va.
Thomson, E. (1930). “Quantitative microscopic analysis.” J. Geol., 38(3), 193–222.
Thorne, P. D., Williams, J. J., and Heathershaw, A. D. (1989). “In situ acoustic measurements of marine gravel threshold and transport.” Sedimentology, 36, 61–74.
Topping, D. J., Parker, R. S., Nelson, J. M., and Bennett, J. P. (1996). “The apparent mid-20th century sediment load decrease in the Colorado River basin an investigation of the mechanics of the Colorado River.” Sampler, Geological Society of America Abstracts and Program, Geological Society of America, Denver, Colo., 28(7,) A-261.
Turcios, L. M., and Gray, J. R. (2001). “U.S. Geological Survey sediment and ancillary data on the World Wide Web.” Proceedings of the 7th Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation, Reno, Nev., Poster 31-36.
Turcios, L. M., Gray, J. R., and Ledford, A. L. (2000). “Summary of U.S. Geological Survey on-line instantaneous fluvial sediment and ancillary data.” <http://water.usgs.gov/osw/sediment>(June 26, 2001).
Underwood, E. E. (1970). Quantitative stereology, Addison-Wesley, Reading, Mass.
U.S. Department of Agriculture (USDA). (1994). “Evaluating the effectiveness of forestry best management practices in meeting water quality goals or standards.” Miscellaneous Publication 1520, USDA Forest Service, Washington, D.C.
U.S. Environmental Protection Agency (USEPA). (1994). “National water quality inventory 1992 report to Congress.” EPA 841-R-94-001, Washington, D.C.
U.S. Geological Survey (USGS). (1976). “Sampling mixtures of water and suspended sediment in streams.” Technical memorandum 76.17, U.S. Geological Survey Office of Water Quality, <http://wwwroper.er.usgs.gov/memos/qw/qw76.17.html>(July 17, 2000).
U.S. Geological Survey (USGS). (1997). “Comparison of the suspended-sediment splitting capabilities of the churn and cone splitters.” Technical Memorandum 97.06, U.S. Geological Survey Office of Water Quality, <http://wwwoper.er.usgs.gov/memos/qw/qw97.06.html>( June 28, 2000).
U.S. Geological Survey (USGS). (1998a). “A national quality assurance program for sediment laboratories operated or used by the Water Resources Division.” Technical Memorandum No. 99.01, U.S. Geological Survey, Office of Surface Water, <http://water.usgs.gov/admin/memo/SW/sw99.01.html>(July 19, 2001).
U.S. Geological Survey (USGS). (1998b). “Guidance for collecting discharge-weighted samples in surface water using an isokinetic sampler.” Technical Memorandum 99.01, U.S. Geological Survey Office of Surface Water, <http://wwwoper.er.usgs.gov/memos/sw/sw99.01.html>(June 9, 2000).
U.S. Geological Survey (USGS). (1999). “Guidelines from the 1998 Sediment Laboratory Chiefs Workshop.” Technical Memorandum 99.04, U.S. Geological Survey Office of Surface Water<http://wwwoper.er.usgs.gov/memos/99/sw99.04.txt>(July 6, 1999).
U.S. Geological Survey (USGS). (2000a). “Water-quality samples for USA.” U.S. Geological Survey, <http://water.usgs.gov/nwis/qwdata>(July 13, 2000).
U.S. Geological Survey (USGS). (2000b). “Suspended-sediment database, daily values of suspended-sediment and ancillary data.” U.S. Geological Survey, <http://webserver.cr.usgs.gov/sediment/>(July 13, 2000).
U.S. Geological Survey (USGS). (2001). “Collection and use of total suspended solids data.” Offices of Water Quality and Surface Water Technical Memorandum 2001.03, November 27, 2000, Reston, Va. <http://water.usgs.gov/admin/memo/SW/sw01.03.html>(Aug. 12, 2005).
U.S. Geological Survey (USGS). (2002). “Water-quality field methods phaseout of US D-77 and frame-type samplers.” U.S. Geological Survey, <http://wwwoper.er.usgs.gov/memos/qw/qw02.09.html>(March 25, 2002).
U.S. Geological Survey (USGS). (2004). “Statistics for hydrologic data-collection stations operated by the USGS in fiscal year 2003, <http://1stop.usgs.gov/StationCounts/sc2004/rpts/view_SW_rpt.cfm?state=tr>(Aug 4, 2005).
U.S. Geological Survey (USGS). (Variously dated). National field manual for the collection of water-quality data: U.S. Geological Survey techniques of water-resources investigations, book 9, chaps. A1–A9, <http://pubs.water.usgs.gov/twri9A>(Aug. 16, 2005).
U.S. Geological Survey Techniques of Water-Resources Investigations, book 5, chapter C1, U.S. Geological Survey, Reston, Va.
Vanoni, V. A. (1975). “Sedimentation Engineering.” ASCE Manuals and Reports on Engineering Practice, No. 54, ASCE, Reston, Va.
Van Rijn, L. C., and Gaweesh, M. T. K. (1992). “New total sediment-load sampler.” Journal of Hydraulic Engineering, 118(12), 1686–1691.
Waslenchuk, D. G. (1976). “New diver-operated bed load sampler.” Journal of the Hydraulics Division, 102(HY6), 747–757.
Waters, T. F. (1995). “Sediment in streams Sources, biological effects, and control.” American Fisheries Society Monograph 7, American Fisheries Society, Bethesda, Md.
Wathen, S. J., Ferguson, R. I., Hoey, T. B., and Werritty, A. (1995). “Unequal mobility of gravel and sand in weakly bimodal river sediments.” Water Resources Research, 31(8), 2087–2096.
Webb, W. W., and Radtke, D. B. (1998). “Surface-water sampling equipment: National field manual for the collection of water-quality data Surface-water sampling equipment.” U.S. Geological Survey Techniques of Water-Resources Investigations, Book 9, A2, variously paged, <http://water.usgs.gov/owq/FieldManual/Chapter2/2.1.html#2.1.1>(September 26, 2001).
Whiting, P. J., Dietrich, W. E., Leopold, L. B., Drake, T. G., and Shreve, R. L. (1988). “Bedload sheets in heterogeneous sediment.” Geology, 16, 105–108.
Wilcock, P. R., Barta, A. F., Shea, C. C., Kondolf, G. M., Mathews, W. V. G., and Pitlick, J. C. (1996). “Observations of flow and sediment entrainment on a large gravel-bed river.” Water Resources Research, 32(9), 2897–2909.
Willis, J. C. (1968). “A lag-deviation method for analyzing channel bed forms.” Water Resources Research, 4(6), 1329–1334.
Willis, J. C., and Kennedy, J. F. (1977). “Sediment discharge of alluvial streams calculated from bed-form statistics.” Report No. 202, Iowa Institute of Hydraulic Research, Iowa City.
Winterstein, T. A., and Stefan, H. E. (1986). “Effects of nozzle orientation on sediment sampling.” Proceedings of the Fourth Federal Interagency Sedimentation Conference, Subcommittee on Sedimentation of the Advisory Committee on Water Data, Las Vegas, Nev., 1, 1-20–1-28.
Wohl, E. E., Anthony, D. J., Madsen, S.W., and Thompson, D. M. (1996). “A comparison of surface sampling methods for coarse fluvial sediments.” Water Resources Res., 32(10), 3219–3226.
Wolman, M. G. (1954). “A method of sampling coarse river-bed material.” Transactions of the American Geophysical Union, 35 (6), 951–956.
Wren, D. G., Barkdoll, B. D., Kuhnle, R. A., and Derrow, R. W. (2000). “Field techniques for suspended-sediment measurement.” Journal of Hydraulic Engineering (ASCE) 126(2): 97–104.
Yuzyk, T. R. (1986). “Bed material sampling in gravel-bed streams.” Report IWD-HQ-WRB-SS-86-8, Water Survey of Canada, Water Resources Branch, Inland Waters Directorate, Conservation and Protection Environment Canada, Winnipeg, Man.
Information & Authors
Information
Published In
Sedimentation Engineering: Processes, Measurements, Modeling, and Practice
Pages: 307 - 353
Copyright
© 2008 American Society of Civil Engineers.
History
Published online: May 6, 2013
ASCE Technical Topics:
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.