ASCE 41 Seismic Assessment of FRP-Repaired Concrete Columns
This article has been corrected.
VIEW CORRECTIONPublication: Journal of Composites for Construction
Volume 25, Issue 2
Abstract
Current standards establish methods for seismic assessment and objectives for retrofit of existing building structures and provide guidance for fiber-reinforced polymer (FRP)-based seismic retrofit measures for existing reinforced concrete (RC) structures. However, there is no agreed-upon methodology for assessing—and therefore establishing—the efficacy of an FRP retrofit. Similarly, as FRP retrofits are becoming common, there arises a need to assess FRP-retrofitted concrete members and structures for their subsequent postretrofit performance. In this paper, a data-driven approach to determining modeling parameters for FRP-retrofitted RC columns consistent with current standards is demonstrated and parameters for flexure-dominated column behavior are proposed. A refined backbone curve is proposed for FRP-retrofitted columns in which an incremental rotation capacity accounting for the improved behavior of the retrofitted column is prescribed. Modeling parameters for flexure-dominated columns are proposed.
Get full access to this article
View all available purchase options and get full access to this article.
Data Availability Statement
Some or all data, models, or codes that support the findings of this study are available from the corresponding author upon reasonable request.
References
ACI (American Concrete Institute). 2017. Guide for the design and construction of externally bonded FRP systems for strengthening concrete structures. ACI 440.2R-17. Farmington Hills, MI: ACI.
ACI (American Concrete Institute). 2019. Building code requirements for structural concrete and commentary. ACI 318-19. Farmington Hills, MI: ACI.
ASCE. 2013. Seismic evaluation and retrofit of existing buildings. ASCE 41-13. Reston, VA: ASCE.
ASCE. 2017. Seismic evaluation and retrofit of existing buildings. ASCE 41-17. Reston, VA: ASCE.
Binici, B. 2008. “Design of FRPs in circular bridge column retrofits for ductility enhancement.” Eng. Struct. 30 (3): 766–776. https://doi.org/10.1016/j.engstruct.2007.05.012.
Bournas, D. A., T. C. Triantafillou, K. Zygouris, and F. Stavropoulos. 2009. “Textile-reinforced mortar versus FRP jacketing in seismic retrofitting of RC columns with continuous or lap-spliced deformed bars.” J. Compos. Constr. 13 (5): 360–371. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000028.
Bousias, S. N., A. L. Spathis, and M. N. Fardis. 2006. “Concrete or FRP jacketing of columns with lap splices for seismic rehabilitation.” J. Adv. Concr. Technol. 4 (3): 431–444. https://doi.org/10.3151/jact.4.431.
Bousias, S. N., T. C. Triantafillou, M. N. Fardis, L. Spathis, and B. A. O’Regan. 2004. “Fiber-reinforced polymer retrofitting of rectangular reinforced concrete columns with or without corrosion.” ACI Struct. J. 101 (4): 512–520.
CEN (European Committee for Standardization). 2004. Design of structures for earthquake resistance—Part 3: Assessment and retrofitting of buildings. Eurocode 8. Brussels, Belgium: CEN.
Chang, K. C., L. L. Chung, B. J. Lee, Y. F. Li, K. C. Tsai, J. S. Hwang, and S. J. Hwang. 2000. “Seismic retrofit study of RC bridge columns.” In Int. Training Program for Seismic Design of Building Structures, 1–20. Taipei, Taiwan: National Center for Research on Earthquake Engineering.
Gu, D. S., G. Wu, Z. S. Wu, and Y. F. Wu. 2010. “The confinement effectiveness of FRP in retrofitting circular concrete columns under simulated seismic load.” J. Compos. Constr. 14 (5): 531–540. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000105.
Gu, D. S., Y. F. Wu, G. Wu, and Z. S. Wu. 2012. “Plastic hinge analysis of FRP confined circular concrete columns.” Constr. Build. Mater. 27 (1): 223–233. https://doi.org/10.1016/j.conbuildmat.2011.07.056.
Hosseini, A., A. R. Khaloo, and S. Fadaee. 2005. “Seismic performance of high-strength concrete square columns confined with carbon fiber reinforced polymers (CFRPs).” Can. J. Civ. Eng. 32 (3): 569–578. https://doi.org/10.1139/l05-006.
Iacobucci, R. D., S. A. Sheikh, and O. Bayrak. 2003. “Retrofit of square concrete columns with carbon fiber-reinforced polymer for seismic resistance.” ACI Struct. J. 100 (6): 785–794.
Li, B., and K. A. Harries. 2018. “Seismic performance assessment of flexure-dominate FRP-confined RC columns using plastic rotation angle.” Eng. Struct. 172: 453–471. https://doi.org/10.1016/j.engstruct.2018.06.046.
Memon, M. S., and S. A. Sheikh. 2005. “Seismic resistance of square concrete columns retrofitted with glass fiber-reinforced polymer.” ACI Struct. J. 102 (5): 774–783.
Ouyang, L. J., W. Y. Gao, B. Zhen, and Z. D. Lu. 2017. “Seismic retrofit of square reinforced concrete columns using basalt and carbon fiber-reinforced polymer sheets: A comparative study.” Compos. Struct. 162: 294–307. https://doi.org/10.1016/j.compstruct.2016.12.016.
Ozcan, O., B. Binici, and G. Ozcebe. 2008. “Improving seismic performance of deficient reinforced concrete columns using carbon fiber-reinforced polymers.” Eng. Struct. 30 (6): 1632–1646. https://doi.org/10.1016/j.engstruct.2007.10.013.
Ozcan, O., B. Binici, and G. Ozcebe. 2010. “Seismic strengthening of rectangular reinforced concrete columns using fiber reinforced polymers.” Eng. Struct. 32 (4): 964–973. https://doi.org/10.1016/j.engstruct.2009.12.021.
Pantelides, C. P., and D. A. Moran. 2013. “Design of FRP jackets for plastic hinge confinement of RC columns.” J. Compos. Constr. 17 (4): 433–442. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000332.
Paultre, P., M. Boucher-Trudeau, R. Eid, and N. Roy. 2016. “Behavior of circular reinforced-concrete columns confined with carbon fiber–reinforced polymers under cyclic flexure and constant axial load.” J. Compos. Constr. 20 (3): 04015065. https://doi.org/10.1061/(ASCE)CC.1943-5614.0000624.
Pessiki, S. P., C. H. Conley, P. Gergely, and R. N. White. 1990. Seismic behavior of lightly reinforced concrete column and beam-column joint details. NCEER Rep. No. 90-0014. Taipei, Taiwan: National Center for Earthquake Engineering Research.
Priestley, M. J. N., F. Seible, and G. M. Calvi. 1996. Seismic design and retrofit of bridges. London: Wiley.
Sadone, R., M. Quiertant, J. Mercier, and E. Ferrier. 2012. “Experimental study on RC columns retrofitted by FRP and subjected to seismic loading.” In Proc., 6th Int. Conf. on FRP Composites in Civil Engineering, 101–109. Rome, Italy: Np. www.IIFC.org.
Sause, R., K. A. Harries, S. L. Walkup, S. Pessiki, and J. M. Ricles. 2004. “Flexural behavior of concrete columns retrofitted with carbon fiber-reinforced polymer jackets.” ACI Struct. J. 101 (5): 708–716.
Seible, F., M. J. N. Priestley, G. A. Hegemier, and D. Innamorato. 1997. “Seismic retrofit of RC columns with continuous carbon fiber jackets.” J. Compos. Constr. 1 (2): 52–62. https://doi.org/10.1061/(ASCE)1090-0268(1997)1:2(52).
Shan, B., Y. Xiao, and Y. Guo. 2006. “Residual performance of FRP-retrofitted RC columns after being subjected to cyclic loading damage.” J. Compos. Constr. 10 (4): 304–312. https://doi.org/10.1061/(ASCE)1090-0268(2006)10:4(304).
Sheikh, S. A., and G. Yau. 2002. “Seismic behavior of concrete columns confined with steel and fiber-reinforced polymers.” ACI Struct. J. 99 (1): 72–80.
Su, R., N. Lam, and H. Tsang. 2008. “Seismic drift demand and capacity of non-seismically designed concrete buildings in Hong Kong.” Electron. J. Struct. Eng. 8: 110–121.
Sun, Z., D. Wang, X. Du, and B. Si. 2011. “Rapid repair of severely earthquake-damaged bridge piers with flexural-shear failure mode.” Earthquake Eng. Eng. Vib. 10 (4): 553–567. https://doi.org/10.1007/s11803-011-0089-6.
Truong, G. T., J.-C. Kim, and K.-K. Choi. 2017. “Seismic performance of reinforced concrete columns retrofitted by various methods.” Eng. Struct. 134: 217–235. https://doi.org/10.1016/j.engstruct.2016.12.046.
Wang, D., Z. Wang, S. T. Smith, and T. Yu. 2017. “Seismic performance of CFRP-confined circular high-strength concrete columns with high axial compression ratio.” Constr. Build. Mater. 134: 91–103. https://doi.org/10.1016/j.conbuildmat.2016.12.108.
Wu, Y. F., T. Liu, and L. Wang. 2008. “Experimental investigation on seismic retrofitting of square RC columns by carbon FRP sheet confinement combined with transverse short glass FRP bars in bored holes.” J. Compos. Constr. 12 (1): 53–60. https://doi.org/10.1061/(ASCE)1090-0268(2008)12:1(53).
Youssef, O., M. A. Elgawady, and J. E. Mills. 2015. “Displacement and plastic hinge length of FRP-confined circular reinforced concrete columns.” Eng. Struct. 101: 465–476. https://doi.org/10.1016/j.engstruct.2015.07.026.
Yuan, F., Y. F. Wu, and C. Q. Li. 2017. “Modelling plastic hinge of FRP-confined RC columns.” Eng. Struct. 131: 651–668. https://doi.org/10.1016/j.engstruct.2016.10.018.
Information & Authors
Information
Published In
Copyright
© 2021 American Society of Civil Engineers.
History
Received: Jun 9, 2020
Accepted: Oct 30, 2020
Published online: Jan 6, 2021
Published in print: Apr 1, 2021
Discussion open until: Jun 6, 2021
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.