Discussion of “Web Buckling in Pultruded Fiber-Reinforced Polymer Deep Beams Subjected to Concentrated Loads” by David T. Borowicz and Lawrence C. Bank
This article is a reply.
VIEW THE ORIGINAL ARTICLEPublication: Journal of Composites for Construction
Volume 19, Issue 3
CC.1943-5614.0000555/asset/dce8b6cf-dfe1-4473-aa7c-35d04425563b/assets/(asce)cc.1943-5614.0000555.fp.png)
Get full access to this article
View all available purchase options and get full access to this article.
References
ASCE. (1984). “Structural plastics design manual.”, New York.
Brunelle, E. J., and Oyibo, G. A. (1983). “Generic buckling curves for specially orthotropic rectangular plates.” AIAA J., 21(8), 1150–1156.
D’Alessandro, R. G. (2009). “Characteristic values of mechanical properties of wide-flange pultruded FRP beams.” Master’s thesis, Univ. of Wisconsin-Madison, Madison, WI.
Donnell, L. H. (1938). “On the application of Southwell’s method for the analysis of buckling tests.” Contributions to the mechanics of solids dedicated to Stephen Timoshenko by his friends on the occasion of his sixtieth birthday anniversary, Macmillan, New York, 27–38.
Ko, W. L. (1987). “Accuracies of Southwell and force/stiffness methods in the prediction of buckling strength of hypersonic aircraft wing tubular panels.”, Ames Research Center, Edwards, CA.
Kollar, L. P., and Springer, G. S. (2003). Mechanics of composite structures, Cambridge University Press, Cambridge, U.K.
Leissa, A. W. (1987). “A review of laminated composite plate buckling.” Appl. Mech. Rev., 40(5), 575–591.
Lekhnitskii, S. G. (1968). Anisotropic plates, Gordon and Breach Science Publishers, New York, London.
March, H. W. (1956a). “Buckling of flat plywood plates in compression, shear, or combined compression and shear.”, United States Dept. of Agriculture, Forest Products Laboratory, Madison, WI.
March, H. W. (1956b). “Buckling of flat plywood plates in compression, shear, or combined compression and shear.”, United States Dept. of Agriculture, Forest Products Laboratory, Madison, WI.
Massey, C. (1963). “Elastic and inelastic lateral instability of I-beams.” Engineer, 216, 672–674.
Massey, C. (1964). “Southwell plot applied to lateral instability of beams.” Engineer, 218, 320.
Meck, H. R. (1977). “Experimental evaluation of lateral buckling loads.” J. Eng. Mech. Div., 103(2), 331–337.
Singer, J., Arbocz, J., and Weller, T. (1998). Buckling experiments, experimental methods in buckling of thin-walled structures, Vol. 1, John Wiley & Son, New York.
Smith, R. C. T. (1944). “The buckling of flat plywood plates in compression.”, Australian Council for Aeronautics, Melbourne, Australia.
Southwell, R. V. (1932). “On the analysis of experimental observations in problems of elastic stability.” Proc. R. Soc. London, 135, 601–616.
Timoshenko, S. P. (1921). “Über die stabilität versteifter platen.” Der Eisenbau, 12, 147–163.
Timoshenko, S. P. (1936). Theory of elastic stability, 1st Ed., McGraw-Hill Book Company, New York, London.
Wittrick, W. H. (1952). “Correlation between some stability problems of orthotropic and isotropic plates under bi-axial and uni-axial direct stress.” Aeronaut. Q., IV, 83–92.
Information & Authors
Information
Published In
Journal of Composites for Construction
Volume 19 • Issue 3 • June 2015
Copyright
© 2015 American Society of Civil Engineers.
History
Received: Jun 6, 2014
Accepted: Aug 18, 2014
Published online: Jan 5, 2015
Published in print: Jun 1, 2015
Discussion open until: Jun 5, 2015
Authors
Metrics & Citations
Metrics
Citations
Download citation
If you have the appropriate software installed, you can download article citation data to the citation manager of your choice. Simply select your manager software from the list below and click Download.